Technical Precision OL-5 LENSOMETER-AZ-3KT3-2

Technical Precision OL-5 LENSOMETER Light Bulb Replacement

Manuel d'instructions

1. Introduction

This manual provides essential instructions for the safe and effective use, installation, and maintenance of your Technical Precision OL-5 LENSOMETER Replacement Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.

Produit terminéview

The Technical Precision OL-5 LENSOMETER Replacement Light Bulb is designed as a direct replacement for the original bulb in OL-5 LENSOMETER devices. It provides reliable illumination necessary for the accurate operation of the LENSOMETER.

Qu'y a-t-il dans la boîte

  • 1 x Technical Precision OL-5 LENSOMETER Replacement Light Bulb
Technical Precision OL-5 LENSOMETER Replacement Light Bulb

Image 1: The Technical Precision OL-5 LENSOMETER Replacement Light Bulb. This image displays the clear glass bulb with a standard screw-in base, designed for the OL-5 LENSOMETER.

2. Configuration et installation

La sécurité avant tout : Before attempting any installation, ensure the LENSOMETER is completely powered off and unplugged from its power source to prevent electrical shock.

  1. Éteindre: Disconnect the LENSOMETER from the main power supply.
  2. Compartiment d'accès à l'ampoule : Locate the bulb access panel or compartment on your OL-5 LENSOMETER. Refer to your LENSOMETER's specific manual if you are unsure.
  3. Retirer l'ancienne ampoule : Carefully unscrew or unclip the old bulb. Allow it to cool if it was recently in use. Dispose of the old bulb responsibly.
  4. Installer une nouvelle ampoule : Gently screw the new Technical Precision OL-5 LENSOMETER Replacement Light Bulb into the socket. Do not overtighten. Ensure it is seated firmly.
  5. Compartiment sécurisé : Fermez et verrouillez le panneau d'accès à l'ampoule.
  6. Mise sous tension : Reconnect the LENSOMETER to the power supply and turn it on to test the new bulb.

3. Fonctionnement

Once installed, the replacement bulb operates as part of your OL-5 LENSOMETER's illumination system. Its function is to provide the necessary light for accurate measurements.

  • Marche/Arrêt : The bulb will illuminate when the LENSOMETER is powered on, and turn off when the device is powered off.
  • Luminosité: The brightness is controlled by the LENSOMETER's internal circuitry and is not adjustable directly from the bulb.

4. Entretien

The Technical Precision OL-5 LENSOMETER Replacement Light Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Nettoyage: If the bulb's glass surface becomes dusty or smudged, gently wipe it with a clean, dry, lint-free cloth. Avoid using abrasive cleaners or excessive moisture. Ensure the bulb is cool and the LENSOMETER is unplugged before cleaning.
  • Remplacement: Replace the bulb when it burns out or if its light output significantly diminishes. The average lifespan is approximately 500 hours.
  • Manutention: Always handle the bulb by its base to avoid transferring oils from your skin to the glass, which can reduce bulb life.

5. Dépannage

ProblèmeCause possibleSolution
L'ampoule ne s'allume pas.L'ampoule est grillée.Remplacez l'ampoule par une neuve.
Ampoule mal insérée.Assurez-vous que l'ampoule est bien vissée dans la douille.
LENSOMETER not receiving power.Check power cord connection and LENSOMETER's power switch.
La lumière est faible ou vacillante.L'ampoule arrive en fin de vie.Remplacez l'ampoule.
Dirty bulb surface.Clean the bulb surface as described in the Maintenance section.

6. Spécifications

MarquePrécision technique
Numéro de modèleOL-5 LENSOMETER-AZ-3KT3-2
Numéro de pièceOL-5 LENSOMETER-AZ-3KT3-2
Voltage120 volts
Quoitage15 watts
Durée de vie moyenne500 heures
Longueur de l'ampoule2.25 pouces
MatérielVerre
Composants inclusPièce de rechange
ASINB0FGYYDL86

7. Garantie et assistance

For specific warranty information or technical support regarding your Technical Precision OL-5 LENSOMETER Replacement Light Bulb, please contact Technical Precision directly. Refer to the packaging or the official Technical Precision website pour les coordonnées.

Fabricant: Précision technique

Website: Technical Precision Store on Amazon

© 2023 Technical Precision. All rights reserved.