AnyTone AT-V55 Portable HF/VHF/UHF Antenna Kit Instruction Manual

1. Introduction

The AnyTone AT-V55 Portable HF/VHF/UHF Antenna Kit is an all-in-one solution designed for amateur radio operators and emergency communications. This kit includes the AT-V55 multi-band portable antenna and a heavy-duty tripod stand, facilitating quick and stable deployment in various field conditions. It covers a wide frequency range from 7–430MHz, offering efficient signal performance with an SWR of ≤1.5 on tested HF bands, often eliminating the need for an external tuner. The robust design features an IP68 waterproof balun and 400W power handling capacity, ensuring reliability in rugged outdoor environments.

2. Précautions de sécurité

To ensure safe operation and prevent damage to the equipment or injury, please observe the following precautions:

• Avoid High-Voltage Lines: Never set up the antenna near high-voltage power lines or metal structures that could conduct electricity.
• Static Discharge/RF Burns: Do not touch metal parts of the antenna during operation to prevent static discharge or RF burns.
• Orages : Never use the antenna during thunderstorms. Always take it down and store it safely in sheltered areas to avoid lightning strikes.
• Placement stable : Ensure the tripod is placed on a stable, level surface. Consider using weight bags or guy ropes for added stability in windy conditions.

3. Contenu du colis

Vérifiez que tous les composants sont présents dans votre kit :

• GH-V5 Telescopic V Antenna ×1
• Heavy-Duty Aluminum Tripod Stand ×1
• 5.6m Telescoping Rod Elements ×2
• 10m Wire Oscillator Elements ×2
• IP68 Waterproof 1:1 Balun (installed)
• Manuel d'instructions × 1
• Sac de transport ×1

4. Instructions de configuration

Follow these steps for quick and easy deployment of your AT-V55 antenna kit:

1. Assembler le trépied :

   Unfold the heavy-duty aluminum tripod stand and secure its legs firmly. Adjust the height to your desired level, ensuring stability. The recommended minimum height for optimal performance is 4 meters (13 feet).

   

   Figure 4.1: Initial setup of the tripod stand.

2. Attach the Balun:

   Mount the GH-V5 balun unit onto the top of the tripod stand. Ensure it is securely fastened.

   

   Figure 4.2: Attaching the GH-V5 balun to the tripod.

3. Connect Telescoping Rod Elements:

   Screw the two 5.6m telescoping rod elements into the designated ports on the GH-V5 balun. These form the primary radiating elements of the antenna.

4. Connect Wire Oscillator Elements (for lower HF bands):

   For operation on lower HF bands (e.g., 40 meters), attach the 10m wire oscillator elements to the appropriate terminals on the balun. Extend these wires outwards, away from the telescoping rods, and secure them if necessary to form an inverted-V configuration.

   

   Figure 4.3: Connecting the wire elements.

5. Extend Elements and Tune:

   Carefully extend the telescoping rod elements to the desired length for your operating frequency. Markings on the elements assist with band selection. For optimal performance, fine-tune the length using an antenna analyzer to achieve the lowest SWR.

   

   Figure 4.4: Fully assembled antenna ready for operation.
6. Connectez le câble coaxial :

   Connect your coaxial cable (not included) to the SO-239 connector on the GH-V5 balun and to your radio equipment.

Guide vidéo de configuration

5. Mode d'emploi

Once the antenna is set up, follow these guidelines for operation:

• Gamme de fréquences : The AT-V55 covers 7–430MHz. For HF bands (7–50MHz), the SWR is typically ≤1.5 with the included telescopic elements, often negating the need for an external tuner.
• VHF/UHF Operation: The antenna is proven usable on VHF/UHF (144/430MHz). Lab tests confirm clear transmission and reception at 145MHz and 438MHz without signal distortion or direction offset when tuned correctly.
• Puissance admissible : The antenna is capable of handling up to 400W of power. Ensure your radio's output power does not exceed this limit to prevent damage.
• Tuning: While often not required for major HF bands, always check your SWR with an external meter for optimal performance and to protect your radio. Adjust element lengths as needed.

6. Entretien

Proper maintenance ensures the longevity and reliable performance of your antenna kit:

• Nettoyage: Periodically clean the telescoping elements and balun with a soft, damp chiffon. Évitez les nettoyants abrasifs.
• Inspection: Regularly inspect all connections, cables, and the tripod for any signs of wear, corrosion, or damage. Ensure all screws and fasteners are tight.
• Stockage: When not in use, disassemble the antenna and store all components in the provided carrying bag in a dry, cool place to protect them from environmental elements.
• IP68 Balun: The IP68 waterproof rating of the balun ensures protection against dust and water immersion. However, avoid unnecessary exposure to extreme conditions to prolong its lifespan.

7. Dépannage

If you encounter issues with your AT-V55 antenna kit, consider the following common troubleshooting steps:

• ROS élevé :
  • Check all connections for tightness and proper seating.
  • Verify the length of the telescoping elements matches the desired frequency.
  • Ensure the wire oscillator elements (if used) are properly deployed and not touching other objects.
  • Inspect coaxial cable for damage.
  • Confirm the antenna is clear of obstructions and metal objects.
• Mauvaise qualité du signal :
  • Ensure the antenna is set up at the recommended minimum height of 4 meters (13 feet).
  • Vérifiez la présence de sources d'interférences locales.
  • Verify your radio settings (frequency, mode, power) are correct.
• Antenna Instability:
  • Assurez-vous que les pieds du trépied sont complètement déployés et verrouillés.
  • Use sandbags, water weights, or guy ropes to secure the tripod, especially in windy conditions.

If problems persist, consult the AnyTone support resources or contact customer service.

8. Spécifications

9. Garantie et assistance

AnyTone products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official AnyTone webConsultez notre site web ou contactez votre revendeur agréé. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

Pour obtenir de l'aide supplémentaire, visitez le Boutique AnyTone sur Amazon.