T-SUN TS-F0120-60-DW

T-SUN Portable LED Work Light User Manual

Model: TS-F0120-60-DW

1. Introduction

Thank you for choosing the T-SUN Portable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.

2. Produit terminéview

The T-SUN Portable LED Work Light is designed to provide bright, versatile illumination for various tasks and environments. It features high-efficiency LED beads, adjustable brightness levels, and compatibility with Dewalt 20V batteries. Additionally, it includes integrated USB and Type-C charging ports for powering external devices.

  • Haute luminosité: Up to 5200 Lumens for extensive area coverage.
  • Modes de luminosité doubles : High (5200 LM, 6-8 hours runtime) and Low (1800 LM, 18-20 hours runtime) for energy conservation.
  • Grand angle de faisceau : 120-140° for broad illumination.
  • Compatibilité de la batterie : Designed for use with Dewalt 20V batteries (e.g., DCB201, DCB203, DCB204, DCB205, DCB206). Note: Battery not included.
  • Deux ports de charge : 5V/2.1A USB-A and Type-C outputs for charging phones, tablets, and other electronic devices.
  • Construction durable : Robust aluminum housing for effective heat dissipation and longevity.
  • Tête réglable : The light head can be adjusted to direct illumination precisely where needed.

3. Consignes de sécurité

Pour garantir un fonctionnement en toute sécurité, veuillez respecter les consignes suivantes :

  • Always ensure the work light is detached from the battery when not in use to prevent power drain.
  • Ne regardez pas directement la lumière LED lorsqu'elle est allumée, car cela pourrait endommager vos yeux.
  • Tenez l'appareil à l'écart de l'eau et de l'humidité afin d'éviter tout choc électrique ou dommage.
  • Ne tentez pas de démonter ni de modifier le projecteur de travail. Les réparations doivent être effectuées uniquement par du personnel qualifié.
  • Use only compatible Dewalt 20V batteries. Using incompatible batteries may damage the device or cause injury.
  • Tenir hors de portée des enfants.
  • Ensure proper ventilation when operating for extended periods to prevent overheating.

4. Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

  • 2 x T-SUN Portable LED Work Lights
  • 1 x Manuel d'instructions (ce document)

5. Installation

5.1 Fixation de la batterie

  1. Assurez-vous que la lampe de travail est éteinte.
  2. Align the grooves on your Dewalt 20V battery with the corresponding slots on the base of the T-SUN work light.
  3. Insérez fermement la batterie en place jusqu'à entendre un clic, indiquant une connexion sécurisée.
Image showing how to install and remove a Dewalt 20V battery from the T-SUN LED Work Light base.
Figure 1: Proper installation and removal of a Dewalt 20V battery.

5.2 Detaching the Battery

  1. Assurez-vous que la lampe de travail est éteinte.
  2. Press the battery release button (usually located on the battery itself).
  3. Slide the battery out of the work light base.

6. Mode d'emploi

6.1 Powering On/Off and Adjusting Brightness

  1. With a compatible Dewalt 20V battery attached, locate the toggle switch on the back of the work light base.
  2. Slide the switch to position 'I' for Low Brightness (1800 Lumens).
  3. Slide the switch to position 'II' for High Brightness (5200 Lumens).
  4. To turn off the light, slide the switch to the center 'O' position.
Image showing the two light modes, Low Brightness (1800LM) and High Brightness (5200LM), with a toggle switch in the center.
Figure 2: Two brightness modes controlled by the toggle switch.

6.2 Adjusting the Light Head

The LED panel is mounted on an adjustable bracket. Gently pivot the light head forward or backward to direct the beam to your desired area. The head offers a flexible angle of up to 140 degrees.

Image showing a T-SUN LED Work Light illuminating a brick wall at night, with an arrow indicating a 140-degree flexible angle.
Figure 3: The light head can be adjusted up to 140 degrees for optimal illumination.

7. Chargement des appareils externes

The T-SUN LED Work Light features a dual charging port for convenience:

  • Sortie USB-A: 5 V/2.1 A
  • Sortie Type-C : 5 V/2.1 A

To charge an external device:

  1. Ensure a charged Dewalt 20V battery is securely attached to the work light.
  2. Locate the USB-A and Type-C ports on the side of the battery adapter.
  3. Branchez le câble de chargement de votre appareil au port approprié.
  4. The red indicator light next to the ports will illuminate when power is being supplied.
Image showing the T-SUN LED Work Light with a Dewalt battery, highlighting the USB-A and Type-C charging ports being used to charge a smartphone.
Figure 4: Utilizing the dual charging ports to power external devices.

8. Entretien

  • Nettoyage: Essuyez l'extérieur de la lampe de travail avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
  • Stockage: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery before long-term storage.
  • Inspection: Periodically check for any signs of damage to the housing, LED panel, or battery contacts. Do not use if damaged.

9. Dépannage

Problème Cause possible Solution
La lumière ne s'allume pas. Battery not properly connected or discharged. Ensure battery is securely attached. Charge or replace the battery.
La luminosité est faible. Low brightness mode selected or battery is low. Switch to high brightness mode. Charge or replace the battery.
Les périphériques externes ne se chargent pas. Battery discharged or cable/device incompatibility. Ensure battery is charged. Check cable and device compatibility.
La lumière clignote. Loose battery connection or low battery charge. Re-seat the battery. Charge or replace the battery.

10. Spécifications

Fonctionnalité Détail
Numéro de modèle TS-F0120-60-DW
Flux lumineux (max.) 5200 lumens
Quoitage 52 watts
Température de couleur 6000 Kelvin (blanc froid)
Angle du faisceau 120-140 degrés
Source d'énergie Battery Powered (Compatible with Dewalt 20V batteries)
Sortie USB 5V/2.1A (USB-A & Type-C)
Matériel Acrylonitrile Butadiene Styrene (ABS), Aluminum, Glass, Plastic, Polycarbonate (PC)
Dimensions (L x l x H) 4.13" x 3.86" x 5.8"
Poids Varies with battery attached

11. Garantie et assistance

The T-SUN Portable LED Work Light comes with a Garantie constructeur d'un anCette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Elle ne couvre pas les dommages résultant d'une mauvaise utilisation, d'accidents, de modifications non autorisées ou de l'usure normale.

For warranty claims or technical support, please contact T-SUN customer service through the retailer where the product was purchased or visit the official T-SUN website pour les coordonnées.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.