1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.
The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.
Figure 1 : Face avant view of the Traxon Allegro XB36 LED Wall Washer Flood Light.
2. Consignes de sécurité
- Risque électrique : Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
- Voltage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
- Mise à la terre : Assurez-vous que le dispositif est correctement mis à la terre afin d'éviter tout risque d'électrocution.
- Utilisation en extérieur : The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
- Température: Do not operate the fixture outside its specified ambient temperature range.
- Manutention: Manipulez le luminaire avec précaution. Évitez de le faire tomber ou de le soumettre à des chocs violents.
- Source de lumière : Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.
3. Contenu du colis
Vérifiez que tous les composants sont présents et non endommagés lors du déballage :
- Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
- Support de montage (pré-attaché ou séparé)
- Manuel d'instructions (ce document)
Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.
4. Configuration et installation
4.1 Montage du luminaire
- Sélectionnez l'emplacement: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
- Support de position : If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
- Fixation sécurisée : Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.
4.2 Connexion électrique
The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.
Figure 2 : Arrière view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.
- Coupure de courant : Coupez l'alimentation électrique principale au niveau du disjoncteur avant d'effectuer tout branchement électrique.
- Connectez l'alimentation d'entrée : Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
- Connexion en série (optionnelle) : If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
- Connexions sécurisées : Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.
Figure 3 : Arrière view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.
Important: All wiring must comply with local electrical codes and regulations.
5. Mode d'emploi
- Mise sous tension : Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
- Atténuation: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
- Angle du faisceau : The fixture provides a 7° light distribution, ideal for focused wall washing effects.
- Ajustement: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.
6. Entretien
The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.
- Nettoyage: Nettoyez périodiquement la lentille et le boîtier avec un chiffon doux et sec.amp Utilisez un chiffon pour enlever la saleté, la poussière ou les débris qui pourraient s'accumuler et affecter le rendement lumineux. N'utilisez pas de nettoyants abrasifs ni de solvants.
- Inspection: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
- Réparations: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Fixture does not illuminate. | No power supply; loose electrical connection; faulty fixture. | Check circuit breaker and power source. Verify all electrical connections are secure. If problem persists, contact support. |
| L'éclairage est irrégulier ou vacille. | Interrupteur variateur incompatible ; connexion desserrée ; fluctuations de courant. | Ensure a compatible phase-cut dimmer is used. Check electrical connections. Consult an electrician for power supply issues. |
| Water ingress inside the fixture. | Improperly sealed cable glands or damaged housing. | Immediately disconnect power. Inspect cable glands and housing for damage. Contact support for repair or replacement. |
8. Spécifications
- Modèle: XB.W3.8370110
- Marque: Traxon
- Vol d'entréetage: 120 VCA
- Quoitage: 44 watts
- Flux lumineux : 2631 lumens
- Température de couleur (CCT) : 3000K
- Distribution de lumière: 7°
- Atténuation: Phase Cut Dimmable
- Indice de protection IP : IP66 (Outdoor Rated)
- Construction: Aluminum/Glass
- Finition: Noir
- Poids de l'article : 13.14 livres (5.96 kg)
- Dimensions du produit : 9 x 5.3 x 11.3 pouces (22.86 x 13.46 x 28.7 cm)
- Fabricant: Osram
9. Informations sur la garantie
Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.
10. Assistance
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.