Junsun 2G+64G Car Stereo Radio for Dodge Ram 1500 2500 3500 (2013-2019) - Instruction Manual

Introduction

Thank you for choosing the Junsun 2G+64G Car Stereo Radio. This manual provides essential information for the proper installation, operation, and maintenance of your new car stereo. Designed for Dodge Ram 1500, 2500, and 3500 models from 2013 to 2019, this unit features a 9-inch IPS HD touchscreen, wireless/wired CarPlay and Android Auto, 5G WiFi, Bluetooth 5.0, GPS navigation, steering wheel control (SWC), DSP, and AM/FM radio. Please read this manual thoroughly before use to ensure optimal performance and safety.

Consignes de sécurité

• Installation professionnelle recommandée : En raison de la complexité des systèmes électriques automobiles, une installation par un professionnel est fortement recommandée afin d'éviter d'endommager l'appareil ou le véhicule.
• Déconnecter la batterie : Débranchez toujours la borne négative de la batterie du véhicule avant d'entreprendre tout travail électrique afin d'éviter les courts-circuits et les risques électriques.
• Vérifier la compatibilité : Avant l'achatasing and installation, ensure the unit is compatible with your vehicle's specific model, year, and AC type (manual AC).
• Câblage sécurisé : Ensure all wiring is properly connected, insulated, and secured to prevent interference, short circuits, or accidental disconnections.
• Évitez les distractions : Do not operate the unit or watch videos while driving. Always prioritize safe driving.

Contenu du colis

Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :

• Head Unit (with 9-inch IPS HD Touchscreen)
• Frame (pre-installed on head unit)
• Wire Cables (main power harness, RCA cables, USB cables)
• pied-de-biche (outil d'installation)
• Speaker (external)
• Câble USB (x2)
• Câbles d'alimentation
• Câble RCA
• Microphone externe
• Décodeur CANbus
• Câble adaptateur d'antenne
• RCA Cable to connect rear camera
• Module GPS

Configuration et installation

The installation process involves removing the original factory radio and fascia, connecting the new head unit, and securing it in place. It is a plug-and-play design, but careful attention to detail is required.

1. Removing the Original Unit

1. Remove Top Dash Panel: Use the provided crowbar tool to gently pry up and remove the top dash panel above the factory radio. This panel is typically held by clips.
2. Unscrew Top Screws: Once the top panel is removed, locate and unscrew the two screws securing the top of the factory radio assembly.
3. Retirer les panneaux latéraux : Carefully pry off the side trim panels of the radio assembly. These are also typically held by clips.
4. Unscrew Main Unit: Locate and unscrew the main bolts/screws holding the factory radio unit in place. There are usually four larger bolts.
5. Débranchez les câbles : Gently pull the factory radio unit forward and disconnect all electrical connectors from the back. Be careful not to damage any wires or connectors.

2. Installing the New Junsun Unit

1. Prepare New Unit: The Junsun head unit comes pre-installed in a new fascia designed for your Dodge Ram.
2. Connecter le faisceau de câbles : Connect the provided main wiring harness to the corresponding ports on the back of the Junsun head unit.
3. Connect CANBUS Decoder: Connect the CANBUS decoder to the main wiring harness. This is crucial for retaining steering wheel controls and other vehicle data.
4. Connecter l'antenne GPS : Connect the GPS antenna to the designated port on the head unit. Route the antenna cable to a location on the dashboard or A-pillar with a clear view du ciel pour une réception optimale du signal.
5. Connectez les câbles USB : Connect the two USB cables. These can be routed to the glove compartment or a custom-drilled hole for easy access.
6. Connecter un microphone externe : Connect the external microphone for improved call quality. Route it to a suitable location, such as near the rearview sur le rétroviseur ou sur le montant A.
7. Connecter l'arrièreview Caméra (facultative) : Si vous installez un amortisseur arrière de rechangeview camera, connect its RCA cable to the 'Rear CAM In' port on the head unit. Ensure the reverse trigger wire is connected to the vehicle's reverse light signal.
8. Connect Original Vehicle Connectors: Connect the new wiring harness to the original vehicle connectors that were previously attached to the factory radio.
9. Fonctionnalité de test : Before fully reassembling, turn on the vehicle and test all functions of the new stereo: power, audio, CarPlay/Android Auto, Bluetooth, GPS, steering wheel controls, and rearview caméra.
10. Sécuriser une nouvelle unité : Carefully slide the new head unit assembly into the dashboard opening. Secure it with the screws removed earlier.
11. Réinstaller les panneaux : Reattach the side trim panels and the top dash panel, ensuring all clips snap securely into place.

Vidéos d'installation

Mode d'emploi

1. CarPlay et Android Auto sans fil/avec fil

• CarPlay sans fil : Connect your iPhone via Bluetooth. Once paired, CarPlay will launch automatically, allowing access to navigation, music, calls, and messages.
• Android Auto filaire/sans fil : Connect your Android device via Bluetooth or USB. Android Auto provides a simplified interface for essential apps while driving.
• Miroir de l'écran: Project your phone's screen onto the head unit for movies, games, or other content.

2. Navigation GPS

• The unit comes with built-in navigation software supporting online and offline maps.
• Connect to 5G WiFi to download map updates and access real-time traffic information.
• Use the touchscreen to input destinations and follow turn-by-turn directions.

3. Commande au volant (SWC)

• The unit retains your original steering wheel controls.
• Use SWC buttons to adjust volume, change tracks, answer/end calls, and navigate menus without taking your hands off the wheel.

4. Bluetooth 5.0

• Pair your smartphone for hands-free calling and seamless music streaming.
• The external microphone ensures clear audio during calls.

5. Radio AM/FM

• Access high-quality FM/AM radio stations.
• Stay updated with traffic news and weather forecasts.

6. Processeur de son numérique (DSP)

• Customize your audio experience with the built-in 16-band EQ DSP sound effect.
• Adjust sound settings for optimal clarity and bass.

7. Arrièreview Caméra

• When the vehicle is in reverse, the rearview image will automatically display on the screen.
• Provides parking assistance with guidelines.

8. Fonction d'écran partagé

• Effectuez plusieurs tâches simultanément en exécutant deux applications à l'écran.
• Par exempleampd'un côté, utilisez la navigation et de l'autre, la lecture de musique.

9. 5GHz WiFi Connectivity

• Connect to a WiFi hotspot for internet access, app downloads, and online navigation.

Vidéos d'exploitation

Entretien

• Nettoyage: Use a soft, dry cloth to clean the touchscreen and exterior of the unit. Avoid abrasive cleaners or solvents.
• Mises à jour logicielles : The unit supports wireless software updates to address bugs and enhance security. Access the update feature through the system settings. Note that these updates improve software usability and do not upgrade the Android version.
• Température: Évitez d'exposer l'appareil à des températures extrêmes.

Dépannage

Caractéristiques

• Marque: Junsun
• Type de service de véhicule : Truck (Dodge Ram 1500, 2500, 3500, 2013-2019)
• Taille de l'écran : 9 pouces
• Type d'affichage : IPS HD Touchscreen (1280x720 pixels)
• Système opérateur: Android 13
• Mémoire: RAM 2GB, ROM 64GB
• Technologie de connectivité: Bluetooth 5.0, Wi-Fi 5 GHz, USB
• Caractéristiques spéciales : Wireless/Wired CarPlay, Android Auto, Screen Mirroring, GPS Navigation (North America maps), Steering Wheel Control (SWC), DSP, AM/FM Radio, Rearview Prise en charge de la caméra.
• Méthode de contrôle : Tactile, Voix
• Composants inclus : Head unit, Frame, Wire cables, Crowbar, External Speaker, USB cables, RCA cables, Canbus, Antenna Adapter, GPS Module.
• Poids de l'article : 1.7 kilogrammes

Garantie et assistance

Your Junsun Car Stereo Radio comes with a Garantie constructeur d'un an. For any inquiries, technical assistance, or issues, please contact our professional after-sales support team. They are available 24/7 to provide quick responses and product knowledge assistance.

Contacter le support : Junsun-US@outlook.com