ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury. The ComMarker Titan1 is designed for high-precision engraving and marking on various materials, including metals, plastics, and jewelry, offering advanced features like color marking and 3D engraving capabilities.

2. Consignes de sécurité

The ComMarker Titan1 is a Class 1 Laser Product (IEC 60825-1 Report Number: 2501Q25848E-SFA1, FDA Accession No.: 2521455-000). Despite being a Class 1 product, proper safety precautions are crucial during operation.

• Portez toujours des lunettes de sécurité laser appropriées lorsque vous utilisez la machine.
• Ensure the work area is well-ventilated to dissipate fumes and particles generated during engraving.
• Ne jamais regarder directement le faisceau laser ni les reflets sur des surfaces brillantes.
• Tenez les matériaux inflammables éloignés de la zone de gravure.
• Do not operate the machine if any covers are removed or safety interlocks are bypassed.
• Assurez-vous que la machine est correctement mise à la terre.
• Familiarisez-vous avec l'emplacement et le fonctionnement du bouton d'arrêt d'urgence.

3. Contenu du colis

Veuillez vérifier que tous les articles mentionnés ci-dessous figurent dans votre colis. Si un article est manquant ou endommagé, veuillez contacter le service client.

Image : Terminéview of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine and its accessories.

• ComMarker Titan1 Laser Engraver Body
• Adaptateur secteur
• Câble de données
• Interrupteur au pied
• Lunettes de protection laser
• Jeu de clés Allen
• Clé USB (contenant le logiciel et les pilotes)
• Règle
• Fil de terre
• Placing Helper (material positioning aids)
• Sample Materials (Rings, Metal Pendants, Pendants)

4. caractéristiques du produit

• 60W JPT Mopa Laser Source: Provides high-speed engraving up to 15,000mm/s and supports color marking on stainless steel.
• Haute précision : Achieves 8K HD accuracy with a precision of 0.01mm.
• Grande zone de gravure : Maximum engraving area of 300mm x 300mm.
• Motorized Elevation: Features electric lifting for precise height adjustment and focusing.
• Dual Focusing Modes: Supports both manual and electric focusing for optimal results.
• Compatibilité logicielle: Compatible with Lightburn and EzCad2 software.
• Large compatibilité des matériaux : Engraves stainless steel, aluminum, gold, silver, alloys, most painted products, and non-transparent plastics.
• 3D Engraving & Cutting: Capable of creating depth effects and performing cutting tasks on suitable materials.
• Longue durée de vie : Designed for durability with a laser source lifespan of 100,000 hours.

5. Guide de configuration

1. Déballage: Retirez soigneusement tous les composants de l'emballage. Conservez l'emballage pour tout transport ou stockage ultérieur.
2. Assemblée: Place the laser engraver body on a stable, level surface. Connect the laser head assembly to the main unit, ensuring all fasteners are secure.
3. Connexion électrique : Connect the power adaptor to the machine and then to a grounded electrical outlet (110V).
4. Mise à la terre : Attach the provided ground wire to the designated grounding point on the machine and to a suitable ground source.
5. Connexion de données: Connectez le câble de données de la machine à votre ordinateur.
6. Installation du logiciel : Insert the USB drive into your computer. Install the provided EzCad2 software and drivers. If using Lightburn, download and install the latest version from the official Lightburn website.
7. Lunettes de sécurité : Always put on the laser safety goggles before powering on the machine.

6. Mode d'emploi

1. Mise sous tension : Ensure all connections are secure and safety goggles are worn. Press the power button on the machine.
2. Lancement du logiciel : Open EzCad2 or Lightburn software on your computer.
3. Emplacement du matériel : Place the material to be engraved on the work platform. Use the placing helpers if needed to secure the material.
4. Mise au point : Adjust the laser head height using the motorized elevation until the laser is properly focused on the material surface. You can use either manual or electric focusing. Refer to the software's focusing guide for precise adjustment.
5. Importation/Création de design : Import your design (BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.) or create a new one within the software.
6. Paramètres des paramètres: Set the appropriate laser parameters (power, speed, frequency, passes) based on the material type and desired engraving effect (e.g., color marking, deep engraving, cutting).
7. Préview (Feu rouge) : Utilisez le pré-feu rougeview function in the software to verify the engraving area and position on your material.
8. Commencer la gravure : Une fois satisfait du préview and parameters, initiate the engraving process from the software. You may use the foot switch for convenient start/stop control.
9. Surveillance: Supervise the engraving process. In case of any issue, press the emergency stop button immediately.
10. Éteindre: After engraving is complete, power off the machine and disconnect it from the power source.

7. Entretien

• Nettoyage des lentilles : Regularly inspect and clean the laser lens with a specialized lens cleaning solution and lint-free wipes to ensure optimal laser performance.
• Zone de travail: Maintenez la plateforme de travail et la zone environnante propres et exemptes de débris et de poussière.
• Ventilation: Ensure the ventilation system is clear and functioning properly to prevent accumulation of fumes and particles.
• Inspection des câbles : Vérifiez régulièrement tous les câbles afin de déceler tout signe d'usure ou de dommage. Remplacez immédiatement tout câble endommagé.
• Mises à jour logicielles : Keep your engraving software (Lightburn, EzCad2) updated to the latest version for best performance and compatibility.

8. Dépannage

9. Spécifications

Image: Detailed dimensions of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine.

10. Garantie et assistance

For warranty information, please refer to the documentation included with your purchase or contact ComMarker customer support directly. If you encounter any issues not covered in this manual or require technical assistance, please reach out to ComMarker customer service through their official weble site ou les coordonnées fournies au moment de l'achat.

Ressources en ligne : For additional guides, software updates, and community support, visit the official ComMarker website.