Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT Advanced PRO 600 Robotic Pool Cleaner. Please read this manual thoroughly before using the device and retain it for future reference.
Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager l'appareil :
- Assurez-vous que l'alimentation électrique est débranchée avant d'effectuer toute opération de maintenance ou de nettoyage.
- Do not operate the robot if the power cable is damaged. Contact customer support for replacement.
- Tenez les enfants et les animaux domestiques éloignés de la piscine pendant le fonctionnement du robot.
- The robot is designed for pool cleaning only. Do not use it for other purposes.
- Only use the original power supply unit provided with the robot.
- Do not enter the pool while the robot is in operation.
- The transformer is rated IP54; the robot itself is IP68 waterproof. Ensure the transformer is placed in a dry, protected area.
Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- BWT Advanced PRO 600 Robotic Pool Cleaner
- Bloc d'alimentation (transformateur)
- 60 ft (18 m) Floating Cable
- Fine and Ultra-fine Mesh Filter Baskets (pre-installed or separate)
- Chariot de transport
- Manuel d'instructions (ce document)
Image: The BWT Advanced PRO 600 Robotic Pool Cleaner, showcasing son design compact et sa poignée intégrée.
Installation
Déballage et installation initiale
Carefully remove the robot and all accessories from the packaging. Place the transport caddy on a flat, stable surface near the pool.
Image : Côté view of the BWT Advanced PRO 600, highlighting its ergonomic handle for easy lifting.
Connexion électrique
Connect the floating cable from the robot to the power supply unit. Ensure the connection is secure. Plug the power supply unit into a grounded electrical outlet. Position the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool and in a shaded area to prevent overheating.
Submerging the Robot
Gently lower the robot into the pool. Allow it to sink to the bottom, releasing any trapped air. Ensure the floating cable is untangled and has enough slack to allow the robot to move freely across the entire pool surface.
Image: The BWT Advanced PRO 600 being carefully lowered into a pool, showing water displacement.
Mode d'emploi
Démarrage d'un cycle de nettoyage
Once the robot is submerged and the power supply is connected, press the power button on the power supply unit or the robot itself (if applicable) to initiate a cleaning cycle. The robot will begin its programmed cleaning path.
Modes de nettoyage
The Advanced PRO 600 offers cleaning cycles of 1.5, 2, or 2.5 hours. Select the desired cycle duration based on your pool's size and cleaning needs. The robot will clean the pool floor, walls, and waterline.
Image: The BWT Advanced PRO 600 actively cleaning the wall of a swimming pool, demonstrating its wall-climbing capability.
Arrêt automatique
The robot is equipped with an automatic shut-off feature. It will power down automatically once the selected cleaning cycle is complete.
Retrieving the Robot
After the cleaning cycle, disconnect the power supply unit from the electrical outlet. Gently pull the floating cable to bring the robot to the edge of the pool. Use the ergonomic handle to lift the robot out of the water. The quick water release system will help drain water efficiently, reducing the robot's weight.
Entretien
Regular maintenance ensures optimal performance and extends the lifespan of your BWT Advanced PRO 600.
Nettoyage du filtre
The robot features a 2-level filter system with fine and ultra-fine mesh baskets. After each cleaning cycle, or as needed, clean the filter baskets:
- Débranchez le robot de l'alimentation électrique.
- Open the top access cover of the robot.
- Retirez les paniers-filtres.
- Rincez soigneusement les paniers filtrants avec un tuyau d'arrosage jusqu'à ce que tous les débris soient éliminés.
- Reinsert the clean filter baskets and close the top access cover securely.
Image : Vue de dessus view of the BWT Advanced PRO 600, illustrating the easy-access filter compartment for cleaning.
Nettoyage à la brosse
Inspect the 4 independent active scrubbing brushes (2 front, 2 back) and tracks for any trapped debris, hair, or algae. Clean them as necessary using a brush or hose.
Image : Dessous view of the BWT Advanced PRO 600, displaying its active scrubbing brushes and robust track system.
Stockage
When not in use for extended periods, clean the robot thoroughly, ensure it is dry, and store it on its transport caddy in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le robot ne démarre pas. | No power supply; cable not connected; power button not pressed. | Check power connections; ensure outlet is functional; press power button. |
| Mauvaise performance de nettoyage. | Clogged filter baskets; worn brushes; insufficient cleaning cycle duration. | Clean filter baskets; inspect and replace brushes if necessary; select a longer cleaning cycle. |
| Le robot se bloque ou se déplace de manière erratique. | Obstruction in pool; tangled cable; air trapped in robot. | Remove obstructions; untangle cable; gently shake robot underwater to release air. |
| Robot does not climb walls or clean waterline. | Clogged filters; water chemistry imbalance (e.g., high calcium); worn brushes. | Clean filters; check pool water chemistry; inspect brushes. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | Advanced PRO 600 |
| Numéro de modèle de l'article | 125576416 |
| Dimensions du produit (L x l x H) | 14.76" x 14.37" x 7.87" (37.5 cm x 36.5 cm x 20 cm) |
| Poids | 14.3 livres (6.5 kg) |
| Longueur du câble | 60 pieds (18 m) |
| Cleaning Cycle Options | 1.5, 2 ou 2.5 heures |
| Puissance d'aspiration | 70 gpm (16 m³/h) |
| Consommation d'énergie | 150 W |
| Robot Waterproof Rating | IP68 |
| Transformer IP Rating | IP54 |
| Taille de piscine appropriée | Up to 40ft x 20ft (in-ground pools) |
| Types de piscines adaptés | All surface types, including tiles and liners; suitable for saltwater pools. |
| Système de filtration | Dual-level (fine and ultra-fine mesh baskets) |
| Brosses | 4 independent active scrubbing brushes |
Garantie et assistance
Informations sur la garantie
The BWT Advanced PRO 600 Robotic Pool Cleaner comes with an extended 3-year warranty. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use conditions.
Assistance clientèle
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact BWT customer support. Refer to the official BWT webConsultez le site ou votre documentation d'achat pour obtenir les coordonnées actuelles.
Manufacturer: BWT