Manuel d'utilisation de l'émetteur et du récepteur HDMI sans fil Vrriis WL084

1. Produit terminéview

The Vrriis WL084 Wireless HDMI Transmitter and Receiver Kit provides a seamless solution for extending HDMI signals wirelessly. This plug-and-play system supports Full HD 1080p resolution at 60Hz, ensuring clear, stable, and smooth video transmission with high sound quality and minimal latency (0.05s).

Designed for versatility, the kit operates on both 2.4GHz and 5GHz frequencies, offering robust signal strength. It can transmit signals up to 656 feet (200 meters) in open, barrier-free environments. For indoor use or through obstacles like walls, bricks, or glass, the transmission distance may be reduced to approximately 330 feet (100 meters).

The system supports connecting one transmitter to up to two receivers, allowing for flexible display configurations. It is compatible with a wide range of HDMI-enabled devices, including laptops, PCs, TV boxes, monitors, TVs, and projectors, making it suitable for various applications such as offices, conferences, church projections, and home entertainment.

2. Contenu du colis

The Vrriis WL084 Wireless HDMI Transmitter and Receiver Kit includes the following items:

• 1 x Émetteur HDMI sans fil (TX)
• 1 x Récepteur HDMI sans fil (RX)
• 2 x Antennes
• 2 x USB-C Power Cables
• 1 x Manuel d'utilisation

3. Instructions de configuration

The Vrriis WL084 Wireless HDMI Extender Kit is designed for quick and easy plug-and-play setup without requiring software installation.

1. Connectez le récepteur (RX) : Plug the RX unit into an available HDMI input port on your display device (TV, monitor, or projector).
2. Alimentez le récepteur (RX) : Connect one of the provided USB-C power cables to the RX unit and plug the other end into a USB power source (e.g., a USB port on your TV or a USB wall adapter).
3. Connectez l'émetteur (TX) : Plug the TX unit into the HDMI output port of your source device (e.g., laptop, PC, TV box).
4. Alimentez l'émetteur (TX) : Connect the second USB-C power cable to the TX unit and plug the other end into a USB power source.
5. Connexion automatique : Once both units are powered on, they will automatically establish a connection. Wait a few seconds for the screen to mirror or extend your display.

3.1. Pairing Instructions (If needed or for additional receivers)

The transmitter and receiver units are pre-paired from the factory. If re-pairing is necessary or if you are adding an extra receiver, follow these steps:

1. Connect TX and RX: Use an HDMI dual female adapter (not included in standard package, may be included in some kits) to connect the HDMI output of the Transmitter (TX) directly to the HDMI input of the Receiver (RX).
2. Power Both Units: Ensure both the TX and RX units are powered on via their respective USB-C cables.
3. Initier le jumelage : Press and hold the 'Pair' button on both the TX and RX units simultaneously until their status indicator lights start flashing.
4. Confirmer l'association : Once the indicator lights on both units stop flashing and remain solid, pairing is successful. You can then disconnect the units from each other and proceed with normal setup.

3.2. Video Tutorial: Re-pairing Transmitter and Receiver

4. Mode d'emploi

4.1. Modes d'affichage

The Vrriis WL084 supports two primary display modes:

• Mode miroir : Duplicates the content from your source device onto the connected display(s).
• Mode étendu: Extends your desktop across multiple screens, allowing for increased workspace and multitasking.

4.2. Multi-Receiver Support

The system can support up to one transmitter (TX) connected to two receivers (RX). This allows you to transmit your video signal to two separate displays simultaneously. Note that as the number of connected receivers increases, the wireless transmission distance may slightly decrease.

4.3. Compatibilité

This Wireless Video HDMI Display Kit is compatible with TVs and projectors that have HDMI inputs. The device connects wirelessly to most TVs, satellite boxes, set-top boxes, DVRs, laptops, PCs, and other media devices with HDMI output.

5. Entretien

To ensure optimal performance and longevity of your Vrriis WL084 Wireless HDMI Transmitter and Receiver Kit, follow these maintenance guidelines:

• Nettoyage: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or aerosols, as they may damage the device.
• Stockage: When not in use, store the units in a cool, dry place away from direct sunlight and extreme temperatures. The provided carrying case is ideal for storage and transport.
• Manutention: Handle the units with care. Avoid dropping them or subjecting them to strong impacts, which could damage internal components.
• Ventilation: Ensure that the units have adequate ventilation during operation to prevent overheating. Do not block any ventilation openings.

6. Dépannage

If you encounter issues with your Vrriis WL084 Wireless HDMI Transmitter and Receiver Kit, please refer to the following common troubleshooting steps:

• Pas de signal/Écran noir :
  • Ensure both the Transmitter (TX) and Receiver (RX) units are properly powered on and their indicator lights are active.
  • Vérifiez que les câbles HDMI sont correctement connectés à la fois à l'appareil source et à l'écran.
  • Check that the display device is set to the correct HDMI input channel.
  • Ensure there are no significant physical obstructions (thick walls, metal structures) between the TX and RX units that could severely degrade the signal.
  • Try re-pairing the TX and RX units as described in Section 3.1.
• Signal intermittent/Mauvaise qualité :
  • Réduisez la distance entre les unités TX et RX.
  • Minimize obstructions between the units.
  • Ensure there are no other strong wireless interference sources nearby (e.g., Wi-Fi routers, microwaves).
  • Verify that the power supply for both units is stable and sufficient (5V/2A recommended).
• Problèmes de synchronisation audio/vidéo :
  • While the device has low latency (0.05s), some minor sync issues can occur with certain setups. Try restarting both the source device and the display.
  • Ensure all cables are fully seated.
• Unités non appariées :
  • Follow the detailed pairing instructions in Section 3.1 carefully.
  • Ensure both units are powered on before attempting to pair.

7. Spécifications

8. Garantie et assistance

For any questions or concerns regarding your Vrriis WL084 Wireless HDMI Transmitter and Receiver Kit, please contact the manufacturer directly. Information regarding product protection plans may be available through your retailer.

Les plans de protection généralement proposés comprennent :

• Plan de protection de 2 ans
• Plan de protection de 3 ans
• Protection complète (plan mensuel couvrant les achats admissibles)

Please refer to your purchase documentation or retailer's website for specific details on warranty coverage and how to obtain support.