Stryker 6506 Power-PRO XT Cot Battery (Model 6500-033-000 B11893) User Manual

1. Introduction

This manual provides essential information for the safe and effective use of the replacement battery for the Stryker 6506 Power-PRO XT Cot. This NiCd battery, model 6500-033-000 B11893, is designed to provide reliable power for emergency medical services equipment. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the battery.

The battery pack features a ventless, sealed construction, making it suitable for demanding environments. Its design allows for quick and easy replacement within an ambulance vehicle.

2. Consignes de sécurité

Always observe the following safety precautions when handling, installing, or charging the battery:

Ne pas disassemble, crush, puncture, or short-circuit the battery.
Ne pas expose the battery to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight.
Ne pas immerse the battery in water or other liquids.
Use only approved charging methods and equipment.
Gardez la batterie hors de portée des enfants et des animaux domestiques.
If the battery shows signs of damage, leakage, or overheating, discontinue use immediately and dispose of it properly according to local regulations.
Assurez une ventilation adéquate pendant la charge.

3. Contenu du colis

Vérifiez que tous les articles sont présents lors du déballage :

1 x Stryker 6506 Power-PRO XT Cot Replacement Battery (Model 6500-033-000 B11893)

4. Configuration et installation

The battery pack is designed for quick and easy replacement in the Stryker 6506 Power-PRO XT Cot.

4.1 Installation de la batterie

Ensure the Stryker cot is powered off and disconnected from any external power sources before attempting battery replacement.
Locate the existing battery compartment on the Stryker 6506 Power-PRO XT Cot.
To remove the old battery pack, press the release mechanism (if present) and slide the old pack off. The design allows for a simple "click and slide off" action.
Align the new replacement battery pack (Model 6500-033-000 B11893) with the battery slot.
Slide the new battery pack into place until it clicks securely. Ensure it is fully seated and locked.
Power on the cot and verify that the battery is recognized and functioning correctly.

Stryker 6506 Power-PRO XT Cot Replacement Battery, Model 6500-033-000 B11893

Image showing the compact design of the replacement battery pack, ready for installation.

5. Fonctionnement

5.1 Chargement de la batterie

The battery pack can be recharged using a wall outlet or directly within an ambulance vehicle's charging system. The charging process is designed to be user-friendly, requiring no complex protocols.

Temps de charge : A fully depleted battery pack can be fully charged in approximately two (2) hours.
Indicateurs de charge : Refer to your Stryker 6506 Power-PRO XT Cot's display or charging station indicators for charging status.

5.2 Performances de la batterie

A fully charged battery pack is capable of powering 15 to 20 "calls" with patients weighing an average of 250 lbs. Actual performance may vary based on usage patterns, cot model, patient weight, and environmental conditions.

6. Entretien

Un entretien approprié garantit la longévité et les performances optimales de votre batterie.

Chargement régulier : Keep the battery charged. Avoid leaving the battery in a fully discharged state for extended periods.
Nettoyage: Wipe the battery pack with a dry, clean cloth. Do not use harsh chemicals or abrasive cleaners. Ensure connectors are free of dirt and debris.
Stockage: If storing the battery for an extended period, ensure it is partially charged (around 50%) and stored in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 3-6 months to prevent deep discharge.
Inspection: Periodically inspect the battery for any signs of physical damage, swelling, or leakage. Replace immediately if any issues are observed.

7. Dépannage

Si vous rencontrez des problèmes avec votre batterie, consultez les problèmes et solutions courants suivants :

Problème	Cause possible	Solution
La batterie ne charge pas	Improperly seated battery Chargeur ou source d'alimentation défectueux Batterie endommagée	Assurez-vous que la batterie est bien insérée et enclenchée. Check charger connection and try a different power outlet/charger. Inspect battery for damage; replace if necessary.
Temps de fonctionnement court	Batterie pas complètement chargée Batterie en fin de vie High power consumption by cot	Ensure battery is charged for the full 2 hours. Envisagez de remplacer la batterie si elle est vieille ou fréquemment utilisée. Minimize unnecessary power usage on the cot.
Battery overheating during charge/use	Batterie ou chargeur défectueux Mauvaise ventilation	Cessez immédiatement l'utilisation et la charge. Contactez le support pour le remplacement. Ensure battery compartment has adequate airflow.

Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client.

8. Spécifications

Numéro de modèle	6500-033-000 B11893
Type de batterie	NiCd (Nickel-Cadmium)
Vol nominaltage	24.0V
Capacité nominale	2.5 Ah
Construction	Ventless, Sealed
Temps de charge approximatif	2 hours (from fully discharged)
Fabricant	Unipower (Generic Brand)
Compatibilité	Stryker 6506 Power-PRO XT Cot

9. Garantie et assistance

Pour toute information concernant la garantie et l'assistance client, veuillez consulter la documentation fournie avec votre achat ou contacter directement le vendeur. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

For technical assistance or questions regarding the Stryker 6506 Power-PRO XT Cot, please consult the cot's official user manual or contact Stryker customer service.

	Manuel d'utilisation du Kinglucky i12 et informations de conformité FCC Ce document fournit des informations de conformité FCC et des conseils d'utilisation pour l'appareil Kinglucky i12, modèle i12. Il détaille les règles FCC, les interférences potentielles et les mesures correctives à prendre par l'utilisateur.
	Stryker Ortho Guidance Express Knee: Advanced Surgical Navigation System Discover the Stryker Ortho Guidance Express Knee system, a state-of-the-art surgical navigation solution designed to enhance precision, efficiency, and patient outcomes in total knee arthroplasty. This document details its features, hardware, software, and benefits for orthopedic surgeons.
	Stryker Prime Series Stretcher Maintenance Manual Official maintenance manual for Stryker Prime Series Stretchers, detailing service, troubleshooting, and repair procedures for healthcare professionals. Includes safety guidelines and component replacement instructions.
	Stryker Cast Cutter Blades Instructions For Use This document provides instructions for use for Stryker Cast Cutter Blades, detailing compatibility with various Stryker Cast Cutters and essential safety warnings and precautions.
	Manuel d'utilisation des civières Stryker Prime Series Ce manuel d'utilisation fournit des instructions détaillées pour l'utilisation et l'entretien en toute sécurité des brancards Stryker de la série Prime, y compris les modèles Prime et Prime X. Il couvre les caractéristiques du produit, l'installation, le fonctionnement, le nettoyage et l'entretien.
	Manuel d'utilisation du fauteuil inclinable Stryker Unity Comprehensive operations manual for the Stryker Unity Recliner, detailing setup, usage, safety precautions, maintenance, and troubleshooting for healthcare professionals and patients. Includes model numbers and specifications.

6500-033-000 B11893