Vormooi EB1

Manuel d'utilisation de l'enregistreur vocal numérique Vormooi

Modèle : EB1

Introduction

Thank you for choosing the Vormooi Digital Voice Recorder. This compact and powerful device is designed for high-quality audio recording, perfect for lectures, meetings, interviews, and personal notes. With its 64GB memory and long battery life, you can capture hours of important audio with ease. Please read this manual carefully before use to ensure proper operation and to maximize your experience with the device.

Vormooi Digital Voice Recorder held in hand

Image: The Vormooi Digital Voice Recorder, a compact blue device, held in a person's hand, showcasing its small size and portability.

Caractéristiques du produit

Vormooi Digital Voice Recorder features and dimensions

Image: An infographic displaying key features of the Vormooi Digital Voice Recorder, including 64GB large memory, 40-45 hours continuous recording, 300mAh battery capacity, and 4000 hours memory hours. It also shows the device's dimensions (2.10 inches by 1.25 inches) and the location of the ON/OFF switch and indicator light.

Vormooi Digital Voice Recorder with professional chip and noise cancellation

Image: The Vormooi Digital Voice Recorder on a desk next to a laptop, highlighting its professional 2159 chip, stronger DSP digital noise cancellation, and high-quality crystal clear recordings.

Vormooi Digital Voice Recorder upgrade comparison

Image: A comparison chart showing the newly upgraded features of the Vormooi Digital Voice Recorder, including 384-32 Kbps bitrates, metal casing, 2.5H full charge time, and a 2159 Pro Chip for noise reduction, contrasting with older models.

Installation

1. Frais initiaux

Upon receiving your Vormooi Voice Recorder, it is recommended to fully charge the device before its first use. Connect the recorder to a USB power source (e.g., computer USB port or a USB wall adapter) using the provided data cable. A full charge takes approximately 2.5 hours.

2. Setting the Correct Local Time

For accurate time stamping of your recordings, ensure the device's internal clock is set to your correct local time. Refer to the "Time Synchronization" section in the Operating Instructions for detailed steps on how to set the time.

Mode d'emploi

1. Recording Audio (One-Key Operation)

  1. To begin recording, simply slide the recording button (usually marked "ON") to the ON position.
  2. The purple indicator light will illuminate for 4-5 seconds, then the red light will flash 3 times, indicating that recording has started.
  3. Pour arrêter l'enregistrement et sauvegarder le file, slide the recording button to the DÉSACTIVÉ position. The recording will be automatically saved.

2. Voice Activation Function (VOR)

The Voice Activation Function (VOR) allows the recorder to automatically start recording when sound is detected and pause when there is silence. This saves memory space and battery life by excluding mute periods.

3. OTG Function (On-The-Go)

The OTG function allows you to connect the voice recorder directly to compatible Android phones to manage your recording filesans avoir besoin d'un ordinateur.

  1. Use the included data cable to connect the voice recorder to your Android phone.
  2. Once connected, your phone should recognize the recorder as an external storage device.
  3. Vous pouvez alors view, listen to, or delete your recording files directly from your phone's file directeur.
  4. Note: OTG connection with iPhone is not supported.
Vormooi Digital Voice Recorder OTG function with Android phone

Image: The Vormooi Digital Voice Recorder connected to an Android smartphone via a USB cable, demonstrating its OTG (On-The-Go) function for direct file management. The phone screen shows a file interface du navigateur.

4. Synchronisation du temps

To ensure recordings are time-stamped correctly, synchronize the device's time with your computer's time. This is typically done by connecting the recorder to a computer. The device usually contains a text file (e.g., "RECSET.txt" or similar) that allows you to update the date and time format. Follow the instructions within that file pour régler l'heure correcte.

5. Lecture et File Gestion

Entretien

Dépannage

ProblèmeCause possibleSolution
L'appareil ne s'allume pas.Batterie faible.Chargez l'appareil pendant au moins 2.5 heure.
Impossible d'enregistrer.Memory full; Device not in recording mode.Supprimer l'ancien files to free up space. Ensure the ON/OFF switch is in the "ON" position.
Mauvaise qualité d'enregistrement.Microphone obstrué ; trop éloigné de la source sonore ; bruit de fond élevé.Ensure microphone is clear. Place device closer to the sound source. Consider enabling Voice Activation Function or recording in a quieter environment.
Appareil non reconnu par l'ordinateur/le téléphone.Faulty USB cable; Incorrect port; Driver issue; Not compatible (e.g., iPhone for OTG).Try a different USB cable or port. Restart your computer/phone. Ensure your phone supports OTG and is Android.
Heure stamp est incorrect.Time not synchronized.Connect to a computer and update the time via the configuration file (e.g., RECSET.txt).

Caractéristiques

FonctionnalitéDétail
MarqueVormooï
ModèleEB1
Capacité de stockage de la mémoire64 Go
Durée d'enregistrementApprox. 40-45 Hours (continuous)
Capacité de la batterie300mAh Lithium-Ion
Temps de chargeEnviron 2.5 heures
MatérielAlliage de zinc de haute qualité
Dimensions (L x l x H)52 x 32 x 6 mm (2.10 x 1.25 x 0.23 pouces)
Poids21g
Format audioWAV
Format du microphoneIntégré, mono
Interface matérielleUSB
CompatibilitémacOS, Windows, Android phone (OTG)

Garantie et assistance

Vormooi stands behind the quality of its products. For any warranty claims, technical support, or inquiries regarding your Digital Voice Recorder, please contact Vormooi customer service through the official Vormooi store on Amazon or their designated support channels. Please retain your proof of purchase for warranty purposes.

Pour plus d'informations, visitez le Vormooi Store on Amazon.