1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT EV03CBX Rechargeable Pool Vacuum Kit. Please read this manual thoroughly before using the product and retain it for future reference.
The BWT EV03CBX is a cordless, portable cleaning device designed for maintaining spas and small pools. It features a rechargeable lithium battery for convenient operation and a filter system to capture fine debris.
2. Consignes de sécurité
AVERTISSEMENT: Le non-respect de ces instructions peut entraîner un choc électrique, un incendie et/ou des blessures graves.
- Lisez toutes les instructions avant d’utiliser cet appareil.
- Do not operate the vacuum when people are in the pool.
- Keep the charging port dry. Do not charge the vacuum near water or with wet hands.
- Utilisez uniquement le chargeur fourni par le fabricant.
- Do not attempt to disassemble or repair the battery or motor unit. Contact qualified service personnel.
- Rangez l'aspirateur dans un endroit frais et sec, à l'abri de la lumière directe du soleil lorsqu'il n'est pas utilisé.
- Cet appareil n'est pas destiné à être utilisé par des personnes (y compris les enfants) ayant des capacités physiques, sensorielles ou mentales réduites, ou manquant d'expérience et de connaissances, à moins qu'elles ne bénéficient d'une surveillance ou d'instructions concernant l'utilisation de l'appareil par une personne responsable de leur sécurité.
3. Contenu du colis
Verify that all items listed below are present in your package. If any parts are missing or damaged, contact customer support.
- BWT EV03CBX Pool Vacuum Unit
- Filter Bag (0.3-liter capacity)
- Câble de chargement (USB)
- Pole Sections (2 sections, total 36.6 inches)
- Vacuum Head with Wheels
- Pinceau
Image 1: Fully assembled BWT EV03CBX Rechargeable Pool Vacuum Kit.
4. Configuration et assemblage
4.1 Chargement de la batterie
- Assurez-vous que l'aspirateur est sec avant de le recharger.
- Locate the charging port on the vacuum unit.
- Connect the provided USB charging cable to the vacuum unit and to a suitable USB power adapter (not included).
- Allow the vacuum to charge fully before first use. The charging indicator light will change color or turn off when charging is complete.
Image 2: USB charging cable.
4.2 Assemblage du poteau
- Take the two pole sections.
- Connect the two sections by aligning the holes and pressing the spring clips. Ensure they lock securely.
- Attach the assembled pole to the vacuum unit. The pole is compatible with standard 1-1/4 inch attachments.
Image 3: Two pole sections for assembly.
4.3 Attaching the Vacuum Head or Brush
- Select either the vacuum head with wheels or the brush attachment based on your cleaning needs.
- Align the chosen attachment with the bottom of the vacuum unit and push firmly until it clicks into place.
Image 4: Brush attachment.
5. Mode d'emploi
5.1 Starting the Vacuum
- Assurez-vous que l'aspirateur est complètement chargé.
- Submerge the vacuum unit completely in water. The non-return valve prevents water from flowing back out.
- Locate the power switch on the vacuum unit. Turn it ON. The motor will start, and the vacuum will begin to draw water and debris.
5.2 Cleaning the Pool/Spa
- Gently guide the vacuum head along the bottom and sides of your pool or spa.
- Move the vacuum slowly to allow sufficient time for debris to be collected.
- The vacuum is designed to operate effectively in water depths up to 2 meters.
- The lithium battery provides up to 30 minutes of continuous operation on a full charge.
5.3 Stopping the Vacuum
- Éteignez l'interrupteur d'alimentation.
- Carefully remove the vacuum from the water.
6. Entretien
6.1 Nettoyage du sac filtrant
It is recommended to clean the filter bag after each use or when suction power decreases.
- Ensure the vacuum is turned OFF and removed from water.
- Locate the click-lock opening system on the vacuum unit. Open it to access the filter compartment.
- Retirez le sac filtrant.
- Empty any collected debris from the filter bag.
- Rinse the filter bag thoroughly with clean water until all debris is removed.
- Reinsert the clean filter bag into the vacuum unit and securely close the click-lock system.
Image 5: Vacuum body with visible filter compartment.
6.2 Stockage
- After cleaning, ensure the vacuum unit and filter bag are completely dry before storage.
- Rangez l'aspirateur dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
- For long-term storage, it is recommended to charge the battery periodically to maintain its health.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'aspirateur ne s'allume pas. | La batterie n'est pas chargée. | Chargez complètement la batterie. |
| Faible puissance d'aspiration. | Le sac filtrant est plein ou obstrué. | Nettoyez le sac filtrant. |
| Faible puissance d'aspiration. | Debris is blocking the intake. | Inspect and clear any blockages from the vacuum head or intake port. |
| L'aspirateur s'arrête inopinément. | La batterie est épuisée. | Rechargez la batterie. |
8. Spécifications
- Modèle: EV03CBX
- Source d'alimentation : Batterie au lithium rechargeable
- Durée de fonctionnement : Jusqu'à 30 minutes (complètement chargé)
- Capacité du filtre : 0.3 litres
- Profondeur de fonctionnement maximale : 2 mètres (6.5 pieds)
- Longueur du poteau : 36.6 inches (two sections)
- Compatibilité des poteaux : Standard 1-1/4 inch attachments
- Dimensions du produit : 6"L x 2"W x 10"H (vacuum unit only)
9. Garantie et assistance
For warranty information or technical support, please refer to the warranty card included with your product or visit the official BWT webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Assistance clientèle : For assistance, please contact BWT customer service through their official channels.