Protectli Vault Pro VP2430-4 Port Micro Appliance/Mini PC

Introduction

This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Protectli Vault Pro VP2430-4 Port Micro Appliance/Mini PC. Please read these instructions carefully before using the device to ensure proper functionality and longevity.

Installation

Follow these steps to set up your Protectli Vault Pro VP2430-4.

1. Déballage et vérification des composants

Déballez soigneusement tous les éléments de la boîte. Vérifiez que tous les éléments sont présents :

• Protectli Vault Pro VP2430-4 unit
• Adaptateur secteur et câble
• Mounting bracket and screws (if included)
• USB Type-C console cable

Image: Included accessories, including the power adapter, mounting bracket, screws, and USB console cable.

2. Connexions physiques

Connect the necessary cables to the device ports. Refer to the image below for port identification.

Image: Rear panel of the Protectli Vault Pro VP2430-4, displaying various ports including USB, HDMI, DisplayPort, and USB-C console port.

• Pouvoir: Connect the power adapter to the DC 12V input port and then to a power outlet.
• Réseau: Connect Ethernet cables to the 2.5G NIC ports (labeled 1-4) as required for your network configuration.
• Afficher: If a display is needed for initial setup or monitoring, connect a monitor to the HDMI or DisplayPort output.
• Périphériques USB : Connect any necessary USB peripherals (keyboard, mouse) to the USB 2.0 or USB 3.2 Type C ports.
• Console: For serial console access, connect the provided USB Type-C console cable to the console port and your computer.

3. Premier démarrage

After all connections are made, press the power button located on the front panel. The device will power on. Since no operating system is pre-installed, you will need to install your preferred firewall or operating system software.

Mode d'emploi

The Protectli Vault Pro VP2430-4 is designed as a micro appliance for network security and mini PC applications. It does not come with a pre-installed operating system, allowing for maximum flexibility.

Compatibilité logicielle

This hardware is tested for compatibility with various open-source firewall software solutions, including OPNsense, pfSense, and VyOS. It also supports other popular open-source software solutions. The device ships with AMI BIOS.

Scénarios d'utilisation typiques

• Pare-feu/Routeur : Utilize the multiple 2.5G NICs to create a robust and secure network gateway.
• Mini-PC : Install a lightweight operating system for various computing tasks.
• Virtualisation : Deploy hypervisors for running virtual machines.

Entretien

Un entretien régulier garantit des performances optimales et une longue durée de vie à votre appareil.

Nettoyage

To clean the exterior of the device, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these can damage the finish or internal components. Ensure the device is powered off and unplugged before cleaning.

Mises à jour du firmware

Periodically check the Protectli website for BIOS/firmware updates. Updating the firmware can improve stability, performance, and security. Follow the instructions provided with the firmware update package carefully.

Hardware Upgrades (RAM/Storage)

The Protectli Vault Pro VP2430-4 supports upgrades for RAM and M.2 SATA SSD storage. To perform an upgrade:

1. Éteignez l'appareil et débranchez tous les câbles.
2. Carefully remove the screws securing the bottom cover.
3. Gently lift the cover to expose the internal components.

Image : Intérieure view of the Protectli Vault Pro VP2430-4, showing the motherboard, RAM slots, and M.2 SSD slots.

Locate the SODIMM DDR5 RAM slots and M.2 SATA SSD slot. Install or replace components according to their respective instructions. Ensure components are seated correctly before reattaching the cover and screws.

Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer.

Pas de courant

• Assurez-vous que l'adaptateur secteur est correctement connecté à l'appareil et à une prise de courant fonctionnelle.
• Vérifiez le bon fonctionnement de la prise de courant en y branchant un autre appareil.
• Vérifiez que l'adaptateur secteur ne présente aucun dommage visible.

Pas de sortie d'affichage

• Confirm the monitor is powered on and correctly connected to the device's HDMI or DisplayPort.
• Essayez un autre câble d'affichage ou un autre moniteur.
• Assurez-vous que la source d'entrée correcte est sélectionnée sur votre moniteur.

Problèmes de connectivité réseau

• Check that Ethernet cables are securely connected to both the device and your network equipment.
• Verify the status indicator lights on the Ethernet ports.
• Ensure your installed operating system or firewall software is correctly configured for network interfaces.

Caractéristiques

Garantie et assistance

Informations sur la garantie

Your Protectli Vault Pro VP2430-4 comes with a 30-day money-back guarantee. For specific warranty terms and conditions, please refer to the official Protectli website ou contacter le support client.

Assistance clientèle

Protectli offers US-based customer support to assist you with any questions or issues. Our dedicated team is available to provide technical assistance and guidance.

Pour obtenir de l'aide, veuillez consulter le site web suivant : Protectli Store or refer to the contact information provided with your product documentation.