1. Introduction
This manual provides detailed instructions for the safe and effective use of your VOOPOO Vinci Spark 220 Mod. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. The Vinci Spark 220 Mod is a high-performance electronic cigarette device designed for experienced users. It requires external 18650 batteries and a compatible tank and coils, which are not included with this product.
Note: This product does not contain nicotine, tobacco, or e-liquid. It is intended for use with nicotine-free e-liquids only.
2. Contenu du colis
Veuillez vérifier que le colis contient les éléments suivants :
- 1 x VOOPOO Vinci Spark 220 Device (Mod only)
- 1 x câble USB de type C
- 1 x Manuel d'utilisation
Note: External 18650 batteries, tank, and coils are not included and must be purchased separately.
3. Produit terminéview
The VOOPOO Vinci Spark 220 Mod features an innovative all-metal design, offering a compact and lightweight form factor. It supports dual external 18650 batteries and delivers up to 220W of power. The device includes a 1.47-inch TFT screen and a multifunctional wheel button for intuitive control.
Image 3.1: VOOPOO Vinci Spark 220 Mod, showcasinet son design et ses couleurs disponibles.
Image 3.2: Key features of the Vinci Spark 220 Mod, including its 108g weight, 1.47-inch TFT screen, and high display resolution.
Composants clés :
- 510 Connecteur : For attaching compatible tanks.
- Multifunctional Wheel Button: For power, wattage adjustment, and menu navigation.
- 1.47'' TFT Screen: Affiche des informations sur le périphérique.
- Compartiment à piles : Houses dual 18650 batteries.
- Port USB de type C : Pour la recharge et les mises à jour du micrologiciel.
- Power & Function Lock Switch: Pour sécuriser l'appareil.
4. Installation
4.1 Installation de la batterie
- Assurez-vous que l'appareil est éteint.
- Locate the easy-to-clip battery cover on the side of the device.
- Ouvrez le couvercle de la batterie.
- Insert two external 18650 batteries according to the correct polarity markings (+ and -) inside the compartment. Incorrect installation can damage the device.
- Refermez bien le couvercle de la batterie jusqu'à ce qu'il s'enclenche.
Image 4.1: Illustration of the battery compartment and the multifunctional wheel button.
4.2 Charge initiale
Although the device supports 5V/3A fast charging, it is recommended to charge external 18650 batteries using a dedicated external battery charger for optimal battery life and safety. If using the device's Type-C port:
- Connectez le câble USB Type-C au port de chargement de l'appareil.
- Connect the other end of the cable to a suitable 5V/3A power adapter (not included).
- L'écran affichera l'état de charge.
- Débranchez l'appareil une fois complètement chargé.
4.3 Tank and Coil Installation (Not Included)
The Vinci Spark 220 Mod is compatible with the Uforce-X Tank (PnP X) and all PnP X Coils. Refer to the specific tank and coil manual for installation instructions. Ensure the tank is securely screwed onto the 510 connector of the mod.
5. Fonctionnement
5.1 Mise sous/hors tension
- Mise sous tension : Appuyez rapidement 5 fois sur le bouton de tir en moins de 2 secondes.
- Éteindre: Press the fire button 5 times rapidly within 2 seconds. Alternatively, use the dedicated Power & Function Lock Switch for quick power off and locking.
5.2 Sélection du mode
The device supports three setting modes: Smart, RBA, and TC-TCR Mode. Navigate through the menu using the multifunctional wheel button to select your desired mode.
- Mode intelligent: Automatically detects coil resistance and sets an appropriate wattage, empêchant la surchauffe accidentelle de la bobine.
- Mode RBA : Allows full wattage control for advanced users and rebuildable atomizers.
- TC-TCR Mode: Temperature Control mode for specific coil materials (e.g., Stainless Steel, Titanium, Nickel).
5.3 wattstage Réglage
Use the multifunctional wheel button to adjust the wattage. Rotate the wheel clockwise to increase wattage and counter-clockwise to decrease it. The wattage range is 5-220W.
5.4 Interface écran
The 1.47-inch TFT screen displays essential information such as current wattage, battery level, coil resistance, voltage, and puff count. The device offers 3 interface themes for customization.
5.5 Fonction de verrouillage/déverrouillage
The dedicated Power & Function Lock Switch allows you to quickly lock or unlock the device, preventing accidental firing or setting changes during transport.
6. Entretien
6.1 Nettoyage de l'appareil
- Regularly wipe the device with a dry, soft cloth to remove dust and fingerprints.
- Clean the 510 connector area with a cotton swab to ensure good conductivity between the mod and the tank.
- Évitez d'utiliser des produits chimiques agressifs ou des matériaux abrasifs, car ils peuvent endommager la finition.
6.2 Entretien de la batterie
- Always use high-quality 18650 batteries from reputable brands.
- Inspect battery wraps for damage regularly. Replace damaged batteries immediately.
- Store spare batteries in protective cases.
- N'exposez pas les batteries à des températures extrêmes ou à la lumière directe du soleil.
7. Dépannage
If you encounter issues with your Vinci Spark 220 Mod, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas | Low battery, incorrect battery installation, device locked. | Charge batteries, re-install batteries with correct polarity, unlock device using the switch or 5 clicks. |
| "Atomizer Short" or "No Atomizer" message | Tank not connected, faulty coil, short circuit in tank. | Ensure tank is securely attached, replace coil, clean 510 connector. |
| Weak vapor production | Faible puissancetage, low battery, old coil. | Augmenter la consommation d'eautage, charge batteries, replace coil. |
| L'appareil ne charge pas | Faulty cable, power adapter, or charging port. | Try a different Type-C cable and power adapter. Ensure port is clean. Consider external battery charger. |
If the problem persists, please contact VOOPOO customer support.
8. Spécifications
Technical specifications for the VOOPOO Vinci Spark 220 Mod:
- Marque: VOOPOO
- Nom du produit: Vinci Spark 220 Mod
- Batterie: Dual external 18650 batteries (not included)
- Gamme de puissance: 5-220W
- Volume de sortietage: 3.2-4.2V
- Chargement : Type C 5 V/3 A
- Écran: 1.47'' TFT
- Plage de résistance : 0.1-3.0Ω
- Compatible Tank: Uforce-X Tank (PnP X)
- Compatible Coils: All PnP X Coils
- Matériel: Alliage d'aluminium
- Dimensions du produit : 45 x 29 x 95 mm (environ 4.5 x 2.9 x 9.5 cm)
- Poids: 340 g (with packaging, device weight is approx. 108g)
Image 8.1: Features of compatible Uforce-X Tank and PnP X Coils, including top airflow, slide-to-fill mechanism, and coil compatibility for rich flavor. Note: Tank and coils are sold separately.
Image 8.2 : Terminéview of available colors and a summary of key specifications for the Vinci Spark 220 Mod.
9. Consignes de sécurité
Veuillez respecter les consignes de sécurité suivantes :
- Gardez l’appareil à l’écart de l’eau et d’autres liquides.
- N'exposez pas l'appareil à des températures extrêmes ou à la lumière directe du soleil.
- Ne pas laisser tomber, perforer ou démonter l'appareil.
- Use only the recommended external 18650 batteries and ensure they are in good condition.
- Charge the device on a fire-proof surface and never leave it unattended while charging.
- Tenir hors de portée des enfants et des animaux domestiques.
- This product is intended for adult users only.
- This product does not contain nicotine and is intended for use with nicotine-free e-liquids.
10. Garantie et assistance
VOOPOO products come with a limited warranty. Please refer to the warranty card included in your package or visit the official VOOPOO webConsultez le site pour connaître les conditions générales de garantie détaillées.
For technical support, troubleshooting assistance, or any other inquiries, please contact VOOPOO customer service through their official weble site ou le détaillant où vous avez acheté le produit.