Manuel d'utilisation du testeur de fibre optique OTDR POMIACAM MOT-51C

1. Introduction

This manual provides detailed instructions for the operation, maintenance, and troubleshooting of the POMIACAM MOT-51C OTDR Fiber Optic Tester. This device is designed for comprehensive fiber optic network analysis, offering functionalities such as Optical Time Domain Reflectometry (OTDR), Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLT), and various cable testing features. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. Consignes de sécurité

Respectez les consignes de sécurité suivantes afin d'éviter les blessures et les dommages à l'appareil :

• N'exposez pas l'appareil à des températures extrêmes, à l'humidité ou à la lumière directe du soleil.
• Évitez de laisser tomber ou de soumettre l'appareil à des impacts violents.
• N’essayez pas d’ouvrir ou de modifier l’appareil. Confiez toute réparation à un personnel qualifié.
• Use only the specified charging cable and power adapter (not included) to charge the device.
• Sécurité laser: The VFL and Light Source emit laser radiation. Avoid direct eye exposure to the laser beam. Do not look directly into the optical ports when the device is active.
• Ensure proper ventilation when operating or charging the device.
• Jetez les piles conformément aux réglementations locales.

3. Contenu du colis

Vérifiez que tous les éléments énumérés ci-dessous sont présents dans votre colis :

The complete package contents for the POMIACAM MOT-51C OTDR, including the main unit, cable tracker, USB cable, carrying case, quick guide, and calibration certificate.

• POMIACAM MOT-51C OTDR Main Unit
• Cable Tracker (for RJ45/BNC)
• Câble de chargement USB
• Étui de transport protecteur
• OTDR Quick Guide
• Certificat d'étalonnage
• Remarque : Un adaptateur de charge n'est pas inclus dans l'emballage.

4. Produit terminéview

The MOT-51C features a robust design with a 5.55-inch OLED touch screen for intuitive operation. Below are the key components and interfaces of the device.

4.1 interfaces d'appareils

Détaillé view of the top interface of the MOT-51C OTDR, highlighting the power button, network testing port, VFL, OPM, and OTDR/LS ports.

Détaillé view of the side interface of the MOT-51C OTDR, showing the LED lamp, Type-C input, UTP/Cable tracer port, Micro SD slot, DC5V/2A power output, and RS 485 port.

• Bouton d'alimentation : Allume/éteint l'appareil.
• Network Testing Port (LAN/RJ45 TDR): For RJ45 cable testing.
• Port VFL : Visual Fault Locator output.
• Port OPM : Optical Power Meter input.
• OTDR/LS Port: Optical Time Domain Reflectometer and Light Source output.
• DEL Lamp: Fournit un éclairage.
• Type-C 5V2A Input: Pour charger l'appareil.
• UTP / Cable Tracer Port: For connecting the cable tracer unit.
• Emplacement pour carte micro SD : Pour le stockage externe.
• DC5V 1A Power Output (USB): Fonctionne comme une batterie externe.
• RS 485 Port: For specific communication needs.

5. Installation

5.1 Battery Installation and Initial Use

The MOT-51C OTDR unit with an illustration of its 3.7V 4000mA Li-ion battery and a note about removing the battery isolation paper before first use. The screen shows the main menu.

1. Battery Isolation: Before first use, open the battery cover and remove the paper piece isolating the battery. This prevents battery discharge during shipping.
2. Chargement : Connect the device to a 5V/2A USB power adapter (not included) using the provided Type-C USB cable. The device has a 3.7V 4000mAh Li-ion battery. A full charge takes approximately 3.5 hours and provides up to 6 hours of normal working time.
3. Marche/Arrêt : Press and hold the Power Button located on the top of the device to turn it on or off.

6. Mode d'emploi

The MOT-51C features a 5.55-inch OLED touch screen with a resolution of 1280x720 for easy navigation and operation.

The POMIACAM MOT-51C OTDR Fiber Optic Tester main unit shown alongside its accompanying cable tracker. The screen displays the main menu with various testing functions.

6.1 Test OTDR

The OTDR function is used to characterize optical fibers. It measures fiber length, loss, attenuation parameters, and generates an event map to locate link points and fusion points.

The MOT-51C OTDR's 5.55-inch OLED touch screen displaying an OTDR test curve with event list and parameters, indicating 1310/1550nm wavelengths and 24/26dB dynamic range.

• Longueurs d'onde : 1310/1550nm.
• Plage dynamique : 26/24dB.
• Max Test Range: Jusqu'à 100 km.
• Opération: Select "OTDR" from the main menu. Configure test parameters such as range, pulse width, and average time. Initiate the test. The device will automatically analyze linkers and fusion points.
• Curve Analysis: The touch screen allows zooming and moving of test curves to display details.
• Rapports : Test reports can be generated, including waveform graphs, parameter settings, fiber event information, and fiber connection information. Reports can be saved in EXCEL, PDF, or screenshot formats.
• Note: This 1310nm/1550nm model cannot test live fiber.

6.2 Wattmètre optique (OPM)

The OPM measures the optical power of a fiber optic signal.

• Calibrated Wavelengths: 850/1300/1310/1490/1550/1625nm.
• Opération: Select "OPM" from the main menu. Connect the fiber to the OPM port. The device will display the measured optical power.

6.3 Localisateur visuel de défauts (VFL)

The VFL emits a visible red laser to locate breaks, bends, and poor connections in fiber optic cables over short distances.

• Longueur d'onde : 650 nm.
• Max Test Range: Jusqu'à 8 km.
• Opération: Select "VFL" from the main menu. Connect the fiber to the VFL port. Activate the laser. Observe the fiber for red light leakage at fault points.
• Avertissement de sécurité : Avoid direct eye exposure to the VFL laser.

6.4 Light Source (LS)

The LS provides a stable optical signal for various testing purposes, often used in conjunction with an OPM for loss measurements.

• Modes : CW (Continuous Wave), 270 Hz, 330 Hz, 1 kHz, 2 kHz.
• Opération: Select "Light Source" from the main menu. Choose the desired wavelength and modulation mode. Connect the fiber to the OTDR/LS port.

6.5 Optical Loss Test (OLT)

The OLT function is used to measure the insertion loss of optical passive devices or fiber links.

• Opération: Select "Optical Loss Test" from the main menu. This typically involves using the Light Source and OPM functions together to measure loss.

6.6 Multi-Functional Cable Testing

The device includes capabilities for testing copper cables.

• Test TDR du câble RJ45 : Detects near-end, mid-end, and far-end faults in RJ45 cables. Maximum test length is 600 meters.
• Mesure de la longueur du câble : Measures cable length for BNC, Cat 5/6, and elevator cables up to 1.5 kilometers.
• Opération: Select "Cable Tester" or "Cable Length" from the main menu. Follow on-screen prompts to connect the cable and perform the test.

6.7 fonctions supplémentaires

• Test PING : For network connectivity diagnostics.
• USB 5V 1A Power Output: The device can function as a power bank to charge other small electronic devices.
• FTP Server Support: Permet de file capacités de transfert.
• Mise à jour en ligne : Supports firmware updates via an internet connection.
• Paramètres: Access the "Settings" menu to configure device parameters such as language, date, time, display brightness, and other system preferences.

7. Entretien

• Nettoyage: Use a soft, dry cloth to clean the device's exterior. For the optical ports, use specialized fiber optic cleaning tools and solutions to prevent contamination.
• Stockage: Store the device in its protective carrying case in a cool, dry place when not in use. Avoid environments with high humidity or extreme temperatures.
• Entretien de la batterie: Pour prolonger la durée de vie de la batterie, évitez de la décharger complètement et fréquemment. En cas de stockage prolongé, chargez-la à environ 50 % et rechargez-la tous les deux ou trois mois.
• Mises à jour logicielles : Regularly check for and install online updates to ensure optimal performance and access to new features.

8. Dépannage

9. Spécifications

10. Garantie et assistance

POMIACAM products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official POMIACAM webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.