1. Introduction
Welcome to your new Geevon Small Travel Alarm Clock. This compact and versatile digital alarm clock is designed to provide accurate timekeeping, dual alarms, indoor temperature display, and a convenient backlight function. Its portable design makes it ideal for various settings, including bedrooms, home offices, and travel.
Image 1.1 : Terminéview of the Geevon Small Travel Alarm Clock, highlighting its compact size and key features such as dual alarm, locking function, snooze, backlight, battery power, 12/24 hour display, temperature, and calendar.
2. Installation
2.1 Installation de la batterie
The Geevon Small Travel Alarm Clock requires two (2) AAA batteries for operation. Batteries are not included with the product.
- Localisez le compartiment à piles à l'arrière de l'horloge.
- Open the battery cover by sliding it down or lifting the latch.
- Insérez deux (2) piles AAA, en veillant à ce que la polarité correcte (+ et - bornes alignées avec les marquages à l'intérieur du compartiment).
- Fermez soigneusement le couvercle de la batterie.
Image 2.1: The back of the alarm clock with the battery compartment open, illustrating where to insert the two AAA batteries.
2.2 Réglage initial de la date et de l'heure
After installing batteries, set the current time and date.
- Appuyez et maintenez enfoncé le ENSEMBLE button (located on the top of the clock) for approximately 3 seconds to enter time setting mode. The hour digit will begin to flash.
- Utilisez le UP (^) or VERS LE BAS (v) buttons (on the back) to adjust the hour.
- Appuyez brièvement ENSEMBLE Vérifiez à nouveau l'heure et passez au réglage des minutes. Ajustez les minutes à l'aide de UP (^) or VERS LE BAS (v).
- Continue briefly pressing ENSEMBLE to cycle through and set the year, month, and day, adjusting each value with the UP (^) or VERS LE BAS (v) buttons.
- Presse ENSEMBLE one last time to exit the setting mode and save your changes.
Video 2.1: Demonstration of setting the time and alarm on the Geevon Small Travel Alarm Clock. This video shows the button locations and the step-by-step process for adjusting time, minutes, and alarm settings.
3. Mode d'emploi
Format 3.1 heure 12/24
Pour basculer entre les formats 12 heures (AM/PM) et 24 heures :
- En mode d'affichage de l'heure normal, appuyez brièvement sur UP (^) button. The display will toggle between the two formats.
Image 3.1: The clock display showing both 12-hour (AM/PM) and 24-hour time formats, illustrating the clear digital readout.
3.2 Affichage de la température
The clock displays the indoor temperature. To switch between Celsius (°C) and Fahrenheit (°F):
- En mode d'affichage de l'heure normal, appuyez brièvement sur ° C / ° F button (located on the back of the clock).
Image 3.2: The clock display showing the indoor temperature in both Fahrenheit and Celsius, demonstrating the temperature conversion feature.
3.3 Réglage des alarmes (Alarme 1 et Alarme 2)
The clock features two independent alarms (Alarm 1 and Alarm 2) that can be set for different times or days.
- Pour régler l'alarme 1 : Appuyez et maintenez enfoncé le Alarme 1 button (bell icon) on the back for approximately 3 seconds. The hour digit for Alarm 1 will flash.
- Utilisez le UP (^) or VERS LE BAS (v) buttons to adjust the desired alarm hour.
- Appuyez brièvement Alarme 1 Vérifiez à nouveau l'heure et passez au réglage des minutes. Ajustez les minutes à l'aide de UP (^) or VERS LE BAS (v).
- Appuyez brièvement Alarme 1 again to select the alarm repetition mode:
- 1-5: Alarm sounds Monday to Friday.
- 6-7: Alarm sounds Saturday and Sunday.
- 1-7: Alarm sounds every day.
- Appuyez brièvement Alarme 1 one last time to confirm your settings and exit.
- Repeat the entire process for Alarm 2 using the Alarme 2 bouton.
Image 3.3: The clock display illustrating the setup for two separate alarm times, indicating the flexibility for weekday and weekend alarms.
3.4 Activation/Désactivation des alarmes
To turn an alarm ON or OFF:
- En mode d'affichage de l'heure normal, appuyez brièvement sur Alarme 1 or Alarme 2 bouton.
- An alarm icon will appear on the display when the respective alarm is active. The icon will disappear when the alarm is deactivated.
3.5 Fonction de répétition
Lorsque l'alarme retentit :
- Appuyez sur le LUMIÈRE/SNOOZE button (top of the clock) to activate the snooze function. The alarm will pause for 5 minutes and then sound again.
- The alarm sound is designed to gradually increase in volume over 2 minutes to ensure a gentle waking experience.
3.6 Fonctionnement du rétroéclairage
Pour éclairer l'écran :
- Appuyez sur le LUMIÈRE/SNOOZE button. The backlight will illuminate for 5 seconds.
Image 3.4: The clock display with and without the 5-second backlight activated, demonstrating its visibility in low-light conditions.
3.7 Fonction de verrouillage
To prevent accidental changes to settings or alarms, use the lock function:
- Pour verrouiller : Appuyez et maintenez la touche enfoncée. LIGHT/SNOOZE/LOCK Appuyez sur le bouton pendant environ 3 secondes jusqu'à ce qu'une icône de verrouillage apparaisse à l'écran.
- To unlock: Press and hold the same button for approximately 3 seconds until the lock icon disappears.
Image 3.5: The clock being placed into a bag, illustrating the convenience of the lock function to prevent accidental button presses during travel.
4. Entretien
4.1 Nettoyage
To clean your Geevon Small Travel Alarm Clock:
- Essuyez l'horloge avec un chiffon doux et sec.
- Do not use abrasive cleaners, chemical solvents, or spray directly onto the clock, as these may damage the surface or internal components.
4.2 Remplacement de la batterie
Replace batteries when the display dims, becomes erratic, or functions become unreliable.
- Follow the steps in Section 2.1 Battery Installation.
- Always replace both AAA batteries simultaneously to ensure optimal performance.
5. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'écran est vide ou très sombre. | Les piles sont mortes ou mal installées. | Check battery installation and replace with fresh AAA batteries. |
| L'alarme ne sonne pas. | Alarm is not set or activated; low battery. | Verify the alarm is set correctly and activated (alarm icon visible on display). Replace batteries if low. |
| L'heure est incorrecte. | Time was not set properly or batteries were removed. | Réinitialisez la date et l'heure en suivant les instructions de la section 2.2. |
| Les boutons ne répondent pas. | La fonction de verrouillage est active. | Deactivate the lock function by pressing and holding the LIGHT/SNOOZE/LOCK button for 3 seconds. |
6. Spécifications
- Modèle: 250509-B
- Dimensions: 3.5 po (L) x 2.36 po (H)
- Poids: 0.26 livres
- Source d'alimentation : Piles 2 x AAA (non incluses)
- Afficher: 3-inch LCD Digital Display
- Caractéristiques: Dual Alarms, Snooze, 5-second Backlight, Indoor Temperature Display, 12/24 Hour Format, Date, Day of Week, Lock Function, Silent Operation
- Matériels: Acrylonitrile Butadiene Styrene (ABS), LCD, Plastic
Image 6.1 : Divers views of the Geevon Small Travel Alarm Clock, including front, top, side, and back, showcasing son design compact et la disposition de ses boutons.
7. Garantie et assistance
7.1 Garantie
This Geevon Small Travel Alarm Clock comes with a 12-month warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
Assistance 7.2
For technical assistance, troubleshooting, or warranty claims, please contact Geevon customer support through the retailer's platform where you purchased the product or visit the official Geevon website pour les coordonnées.