MYADDICTION LR53089803

MYADDICTION Digital Alarm Clock (Model LR53089803) User Manual

Brand: MYADDICTION | Model: LR53089803

1. Introduction

Thank you for choosing the MYADDICTION Digital Alarm Clock. This device features a large mirrored LED display, adjustable brightness, and multiple alarm settings to enhance your daily routine. This manual provides comprehensive instructions for its setup, operation, and maintenance.

MYADDICTION Digital Alarm Clock front view showing time 22:08 with alarm icons

Illustration 1.1 : Avant view of the MYADDICTION Digital Alarm Clock displaying time and alarm indicators.

2. Consignes de sécurité

  • N’exposez pas l’appareil à des températures extrêmes, à la lumière directe du soleil ou à une forte humidité.
  • Évitez de faire tomber l'horloge ou de la soumettre à des chocs violents.
  • Use only the specified power sources (USB or AAA batteries).
  • Tenir hors de portée des enfants.
  • N’essayez pas de démonter ou de réparer l’appareil vous-même. Contactez un technicien qualifié pour toute intervention.

3. Contenu du colis

Lors du déballage, veuillez vérifier que tous les articles sont présents et en bon état :

  • 1x MYADDICTION Digital Alarm Clock
  • 1x USB Power Cable (for continuous power)
  • Manuel de l'utilisateur (ce document)

Note: AAA batteries are not included and must be purchased separately for battery-powered operation.

4. Produit terminéview

Familiarize yourself with the main components and controls of your digital alarm clock.

Dos view of MYADDICTION Digital Alarm Clock showing buttons and ports

Image 4.1 : Arrière view of the alarm clock, highlighting control buttons and power input.

Commandes et ports :

  • Bouton MODE : Permet de basculer entre les modes d'affichage de l'heure, de la date et de la température, et d'accéder aux modes de réglage.
  • Bouton HAUT : Used to increase values during settings or navigate menus.
  • Bouton BAS : Used to decrease values during settings or navigate menus.
  • Le bouton de la sieste: Activates snooze during an alarm, or adjusts display brightness in normal mode.
  • Entrée d'alimentation USB: Pour connecter le câble d'alimentation USB.
  • Compartiment à piles : For AAA batteries (backup power or temporary display).

5. Installation

5.1 Alimentation de l'horloge

The clock supports dual power supply modes:

  1. USB Power Supply (Recommended for continuous display): Connect the provided USB cable to the USB power input port on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port. The display will remain continuously on.
  2. AAA Battery Power Supply (Backup or temporary display): Open the battery compartment on the back and insert 3 AAA batteries (not included), ensuring correct polarity. When powered by batteries, the display will automatically turn off after 10-16 seconds to conserve power. Press any button to reactivate the display for 10-16 seconds.

5.2 Réglage initial de l'heure

After powering on, the clock will typically display a default time. Follow these steps to set the correct time:

  1. Appuyez et maintenez enfoncé le MODE button for approximately 3 seconds to enter time setting mode. The hour digits will start flashing.
  2. Utilisez le UP or VERS LE BAS boutons pour régler l'heure.
  3. Appuyez sur le MODE Appuyez de nouveau sur le bouton pour confirmer l'heure et passer au réglage des minutes. Les chiffres des minutes clignoteront.
  4. Utilisez le UP or VERS LE BAS boutons pour régler les minutes.
  5. Appuyez sur le MODE Appuyez de nouveau sur le bouton pour quitter le mode de réglage de l'heure.

6. Mode d'emploi

6.1 Réglage de la luminosité de l'écran

The clock offers 5 levels of brightness. To adjust:

  • En mode d'affichage de l'heure normal, appuyez brièvement sur ROUPILLON Appuyez plusieurs fois sur le bouton pour faire défiler les 5 niveaux de luminosité.
  • The clock also features a Night Mode (22:00-06:00) where brightness automatically reduces to a low level.

6.2 Réglage des alarmes

The clock supports two independent alarms (Alarm 1 and Alarm 2) and three weekday alarm modes.

  1. Appuyez sur le MODE Appuyez plusieurs fois sur le bouton jusqu'à ce que « AL1 » ou « AL2 » apparaisse sur l'écran.
  2. Appuyez et maintenez enfoncé le MODE button for 3 seconds to enter alarm setting mode. The hour digits for the selected alarm will flash.
  3. Utilisez le UP or VERS LE BAS boutons pour régler l'heure de l'alarme souhaitée.
  4. Presse MODE to confirm the hour and move to minute setting. Use UP or VERS LE BAS pour régler les minutes.
  5. Presse MODE à nouveau pour sélectionner le mode d'alarme :
    • "1-5": L'alarme sonne du lundi au vendredi.
    • "1-6": L'alarme sonne du lundi au samedi.
    • "1-7": Alarm sounds Monday to Sunday (every day).
    Utiliser UP or VERS LE BAS pour sélectionner le mode souhaité.
  6. Presse MODE to exit alarm setting. The alarm icon (1 or 2) will appear on the display, indicating the alarm is active.
  7. Pour activer/désactiver une alarme, appuyez brièvement sur le bouton. UP button in normal time display mode to cycle through alarm activation.

6.3 Fonction de répétition

Lorsqu'une alarme retentit, appuyez brièvement sur ROUPILLON button to temporarily silence the alarm. The alarm will sound again after a few minutes (typical snooze duration is 5-9 minutes, refer to product specifics if available, otherwise general). To turn off the alarm completely, press any other button.

6.4 Display Modes (Time, Date, Temperature)

The clock offers two main display modes:

  • Mode 1: Only display time.
  • Mode 2: Time, date, and temperature cycle display. The display will automatically cycle through showing the time, then the date, then the temperature.

To switch between these modes, short press the MODE bouton en mode d'affichage de l'heure normal.

7. Entretien

  • Nettoyage: Use a soft, dry cloth to clean the mirrored display and casing. N’utilisez pas de nettoyants abrasifs ni de solvants.
  • Remplacement de la batterie : If using AAA batteries, replace them when the display becomes dim or the clock functions erratically. Ensure correct polarity.
  • Stockage: Si vous rangez l'horloge pendant une période prolongée, retirez les piles AAA pour éviter les fuites.

8. Dépannage

ProblèmeCause possibleSolution
L'écran est vide ou sombre.No power, low batteries, or in battery-saving mode.
  • Ensure USB cable is securely connected and powered.
  • Replace AAA batteries if using battery power.
  • If on battery power, press any button to activate display.
L'alarme ne sonne pas.Alarm not set, alarm turned off, or incorrect weekday mode.
  • Verify alarm time and activation (alarm icon visible).
  • Check the selected weekday alarm mode (1-5, 1-6, 1-7).
Time/Date/Temperature display is incorrect.Paramètres incorrects.
  • Refer to Section 5.2 for time setting.
  • Refer to Section 6.4 for display mode selection.

9. Spécifications

  • Marque: MYADDICTION
  • Numéro de modèle : LR53089803
  • Type d'affichage : Digital LED, Mirrored Surface
  • Niveaux de luminosité : 5 niveaux réglables
  • Modes d'affichage: Time only; Time, Date, Temperature cycle
  • Fonctions d'alarme : Dual alarms, 3 weekday modes (Mon-Fri, Mon-Sat, Mon-Sun)
  • Fonction de répétition: Oui
  • Source d'alimentation : USB (DC 5V) ou 3 piles AAA (non incluses)
  • Dimensions du produit : 128mm (L) x 65mm (H) x 35mm (W) (approx. 5.04 x 2.56 x 1.38 inches)
  • Poids de l'article : 200 gramme
Dimensions of MYADDICTION Digital Alarm Clock showing length, height, and width

Image 9.1: Product dimensions of the MYADDICTION Digital Alarm Clock.

10. Garantie et assistance

For warranty information or technical support, please refer to the retailer's policy or contact MYADDICTION customer service through their official channels. Please have your model number (LR53089803) and purchase details ready when contacting support.

Manufacturer: LR HOME DÉCOR

© 2023 MYADDICTION. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.