ERKUL 5.2" Running Boards Instruction Manual

1. Introduction

Thank you for choosing ERKUL 5.2" Running Boards. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new running boards. Please read these instructions thoroughly before beginning installation to ensure proper fitment and functionality. These running boards are specifically designed for Subaru Forester models manufactured between 2014 and 2018.

2. Consignes de sécurité

• Always ensure the vehicle is on a stable, level surface before beginning any work.
• Portez l'équipement de protection individuelle approprié, notamment des lunettes de sécurité et des gants.
• If your vehicle is lower to the ground, using a car lift and seeking professional support is recommended to ensure the best outcome.
• Do not exceed the maximum weight capacity of 350 lbs per step.
• Vérifiez régulièrement le serrage de tous les éléments de fixation et recherchez tout signe d'usure ou de dommage.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• Pair of Running Boards (2 units)
• Pair of Brackets (Specific to vehicle model)
• All Necessary Mounting Hardware (Bolts, nuts, washers)

If any parts are missing or damaged, please contact ERKUL customer support.

4. Instructions d'installation

The ERKUL 5.2" Running Boards feature a no-drill installation process, utilizing existing factory mounting points on your Subaru Forester. The following steps provide a general overview. Refer to the detailed video instructions for visual guidance.

4.1. Préparation

1. Park your vehicle on a flat, stable surface and engage the parking brake.
2. Gather all tools required for installation (typically a wrench set).
3. Déballez tous les composants et vérifiez-les par rapport à la liste du contenu de l'emballage.

4.2. Installation du support

The installation process involves removing existing plastic covers or plugs from the vehicle's undercarriage and attaching the provided mounting brackets. The brackets are designed for specific positions (front, middle, rear) and sides (left, right).

1. Locate the factory mounting points along the vehicle's rocker panel. These are typically covered by plastic plugs or small access panels.
2. Remove any existing plastic plugs or covers from the mounting points using a screwdriver or appropriate tool.
3. Insert the provided bolts (e.g., M8 or M10) into the designated holes.
4. Attach the corresponding brackets (Front, Middle, Rear) to the bolts, ensuring correct orientation.
5. Secure the brackets loosely with washers and nuts, allowing for minor adjustments.

4.3. Running Board Attachment

1. Carefully lift the running board and align it with the installed brackets.
2. Attach the running board to the brackets using the remaining hardware.
3. Once all bolts are in place, tighten all hardware securely, starting from the center and working outwards. Ensure the running board is level and firmly attached.
4. Répétez le processus pour l'autre côté du véhicule.

Image 1: Erkul 5.2 inch Running Boards, silver, shown installed on a Subaru Forester. This image highlights the sleek design and integrated appearance of the running boards on the vehicle.

5. Mode d'emploi

The running boards are designed to provide a stable step for easier entry and exit from your vehicle. Step onto the running board with caution, ensuring your foot is placed firmly on the anti-slip surface. The robust construction supports a weight capacity of up to 350 lbs per step.

Image 2: Un gros plan view of the running board's anti-slip surface and sturdy construction, emphasizing its functionality and aesthetic integration with the vehicle.

6. Entretien

To ensure the longevity and appearance of your ERKUL running boards, follow these simple maintenance guidelines:

• Nettoyage: Regularly clean the running boards with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the anodized eloxal finish.
• Inspection: Periodically check all mounting bolts and nuts to ensure they remain tight. Re-tighten if necessary. Inspect the running boards for any signs of damage, corrosion, or wear.
• Soins d'hiver : In areas with heavy snow or ice, ensure snow and ice are cleared from the running boards to prevent accumulation and potential damage.

7. Dépannage

If you encounter any issues with your running boards, consider the following:

• Coupe ample : If the running boards feel loose, re-check and tighten all mounting hardware.
• Bruits inhabituels : Des grincements ou des cliquetis peuvent indiquer des fixations desserrées. Vérifiez et resserrez toutes les connexions.
• Dommage: For significant damage due to impact or corrosion, replacement of the affected component or the entire running board set may be necessary.

For persistent issues or concerns, please contact ERKUL customer support.

8. Spécifications

9. Garantie et assistance

ERKUL products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official ERKUL website. For any questions, technical assistance, or support, please contact ERKUL customer service through the retailer where the product was purchased or via the contact information available on the ERKUL AUTO store page.

Image 3: ERKUL AUTO brand logo, representing quality and reliability.