Introduction
Thank you for choosing the Devoko Electric Standing Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new desk. Designed for comfort and productivity, this height-adjustable desk allows you to seamlessly switch between sitting and standing positions throughout your workday.
Image: The Devoko Electric Standing Desk in a modern home office environment, showcasinson design élégant et sa fonctionnalité.
Configuration et assemblage
Before you begin assembly, please ensure all components are present and undamaged. Detailed instructions and numbered parts are included to facilitate a quick setup, typically within 30 minutes. No additional drilling is required as holes are pre-cut, and all necessary installation tools are provided.
Contenu du colis
Image: All components of the Devoko adjustable desk laid out, including two desktop panels, leg frames, and various hardware, indicating pre-drilled holes and included tools.
- Desktop Panels (2)
- Cadres de jambes (2)
- Barre transversale
- Boîtier moteur et de commande
- Panneau de contrôle
- Adaptateur secteur et câble
- Crochet pour casque
- Clips de gestion des câbles
- Pieds réglables
- Quincaillerie de montage (vis, boulons, clé Allen)
Étapes d'assemblage
- Déballer et identifier : Déballez soigneusement tous les composants et vérifiez-les par rapport à la liste des pièces.
- Assembler les cadres de pieds : Attach the crossbar to the leg frames using the provided hardware. Ensure all connections are secure.
- Ajouter des panneaux de bureau : Place the desktop panels upside down on a soft, clean surface. Align the pre-drilled holes with the leg frame and secure using screws.
- Installer le moteur et le boîtier de commande : Mount the motor and control box to the designated areas under the desktop. Connect the motor cable to the control box.
- Panneau de commande du support : Attach the control panel to the front edge of the desk, typically on the right side, and connect its cable to the control box.
- Connecter l'alimentation : Branchez l'adaptateur secteur au boîtier de commande, puis à une prise murale.
- Accessoires d'installation : Attach the headphone hook and cable management clips as desired. Adjust the leveling feet to ensure the desk is stable on uneven surfaces.
Image : détaillée view of the desk's integrated features: a headphone hook, cable management clips, a wire pass-through hole, and adjustable leveling feet for stability.
Mode d'emploi
The Devoko Electric Standing Desk features intuitive controls for height adjustment and memory presets, designed for ease of use and ergonomic comfort.
Réglage de la hauteur
The desk's height can be electrically adjusted from 71 cm (27.9 pouces) à 119 cm (46.8 pouces), accommodating users of various heights. The lifting mechanism operates quietly (≤55dB).
Image: A visual representation of the desk's height range, showing a chair at 71cm and the desk extended to 119cm.
Control Panel and Memory Functions
The integrated 4-key control panel allows for easy height adjustments and includes two programmable memory presets.
Image: The intelligent control panel featuring up and down arrows for manual adjustment, and two memory buttons (1 and 2) for saving preferred sitting and standing heights.
- Flèches haut/bas : Press and hold the up or down arrow to manually adjust the desk to your desired height.
- Configuration des préréglages de mémoire :
- Adjust the desk to your preferred sitting height.
- Press the "M" button (if present, or a similar 'Set' button) followed by "1" to save this height to memory position 1.
- Adjust the desk to your preferred standing height.
- Press the "M" button followed by "2" to save this height to memory position 2.
- Rappel des préréglages de mémoire : Press "1" or "2" to automatically move the desk to the saved height.
Système anti-collision
For safety, the desk is equipped with an anti-collision system. If the desk encounters an obstacle during descent, it will immediately stop and automatically retract approximately 2 cm to prevent damage or injury.
Entretien
Proper maintenance ensures the longevity and optimal performance of your Devoko Electric Standing Desk.
- Nettoyage: Essuyez le bureau et le cadre avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les produits chimiques agressifs qui pourraient endommager la finition.
- Gestion des câbles: Regularly check and organize cables using the provided clips to prevent tangles and damage.
- Inspection: Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
- Entretien du moteur : The industrial alloy columns and galvanized coating are designed for durability and low maintenance. Avoid exposing the motor mechanism to excessive moisture or dust.
Dépannage
If you encounter any issues with your Devoko Electric Standing Desk, refer to the following common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le bureau ne bouge pas. | Câble d'alimentation débranché, câble moteur desserré, surcharge. | Check power connection. Ensure all cables are securely connected. Reduce weight on the desk (max load 60kg). |
| Le bureau bouge de façon irrégulière ou fait un bruit inhabituel. | Charge inégale, connexions desserrées, obstruction. | Distribute weight evenly. Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Le système anticollision se déclenche fréquemment. | Obstruction, environnement sensible. | Remove any objects that might be in the path of the desk. If the issue persists, consult customer support. |
| Les préréglages de mémoire ne fonctionnent pas. | Programmation incorrecte. | Re-program the memory presets following the instructions in the "Operating Instructions" section. |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client de Devoko pour obtenir une assistance professionnelle.
Caractéristiques
Key technical specifications for the Devoko Electric Standing Desk (Model 0427).
- Marque: Devoko
- Numéro de modèle : 0427
- Couleur: Brun
- Dimensions du produit (L x l x H) : 100 cm x 60 cm x 71-119 cm (39.4 x 23.6 x 27.9-46.8 pouces)
- Plage de hauteur réglable : 71 cm à 119 cm (27.9 à 46.8 pouces)
- Poids de l'article : 18.1 kg (39.9 lb)
- Capacité de charge maximale: 60 kg (132 lb)
- Noise Level (Operation): ≤55 dB
- Matériau du cadre : Industrial Alloy Steel
- Matériau du bureau : Bois d'ingénierie
- Dossier spécial : Height Adjustable, Anti-Collision System, Memory Presets
- ASIN: B0DQVCFDX9
Image: Detailed product dimensions, including the desktop size (100x60cm) and the adjustable height range (71-119cm).
Image: The desk illustrating its maximum load capacity of 60 kg, ensuring stability for various office equipment.
Garantie et assistance
Devoko s'engage à fournir des produits de haute qualité et à assurer la satisfaction de ses clients.
Informations sur la garantie
Please refer to the warranty card included with your product for specific details regarding coverage period and terms. Generally, Devoko products are covered against manufacturing defects. Keep your proof of purchase for warranty claims.
Assistance clientèle
For any questions, concerns, or assistance with your Devoko Electric Standing Desk, please contact our customer support team. You can typically find contact information on the Devoko official website or through your purchase platform. When contacting support, please have your model number (0427) and purchase details ready.
Support en ligne: Visitez le site officiel de Devoko webSite regroupant les FAQ, l'enregistrement des produits et les formulaires de contact pour l'assistance.
Assistance par e-mail : Se référer à website
Assistance téléphonique : Se référer à website