KUNPHY BCM-187

KUNPHY Ultrasonic Jewelry Cleaner BCM-187

Manuel d'instructions

1. Introduction

This manual provides essential information for the safe and effective use of your KUNPHY Ultrasonic Jewelry Cleaner, model BCM-187. This device utilizes ultrasonic waves to clean various items such as jewelry, eyeglasses, and small accessories, offering a thorough cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner in black, with a ring and necklace being cleaned in water.
The KUNPHY Ultrasonic Jewelry Cleaner, designed for effective cleaning of various items.

2. Consignes de sécurité

Please read all safety instructions before operating the device to prevent injury or damage.

  • Ne plongez pas l'unité principale dans l'eau ou d'autres liquides.
  • Vérifiez que le cordon d'alimentation n'est pas endommagé et qu'il est correctement branché à une prise de courant appropriée.
  • Gardez l’appareil hors de portée des enfants.
  • N’utilisez pas l’appareil de nettoyage si le réservoir d’eau est vide.
  • Avoid cleaning items that are sensitive to ultrasonic vibrations, such as certain types of pearls, emeralds, or glued items. Consult a jeweler if unsure.
  • Débranchez l'appareil lorsqu'il n'est pas utilisé et avant de le nettoyer.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

  • KUNPHY Ultrasonic Jewelry Cleaner (BCM-187)

4. Produit terminéview

The KUNPHY Ultrasonic Jewelry Cleaner features a compact design with a stainless steel cleaning tank and a simple one-touch operation button. It is equipped with a transparent lid to observe the cleaning process.

KUNPHY Ultrasonic Jewelry Cleaner next to a handbag, showing its compact dimensions: 8.66 inches long, 3.74 inches wide, and 2.44 inches high.
The compact and portable design of the KUNPHY Ultrasonic Jewelry Cleaner, with dimensions indicated.

5. Configuration et fonctionnement

Follow these steps for initial setup and to operate your ultrasonic cleaner:

  1. Remplissez le réservoir : Open the lid and pour tap water into the stainless steel tank. Do not exceed the maximum water level indicator.
  2. Déposez les objets : Carefully place the items you wish to clean into the water. Ensure items are fully submerged but not overcrowded.
  3. Ajouter une solution de nettoyage (facultatif) : For enhanced cleaning results, add a few drops of liquid dish soap or a specialized KUNPHY cleaning solution to the water.
  4. Commence a nettoyer: Close the lid and press the one-touch ON/OFF button. The indicator light will illuminate, and the cleaning cycle will begin. The device operates with a 3-minute cleaning cycle.
  5. Nettoyage final : Once the cycle is complete, the device will automatically stop. Open the lid, carefully remove your items, and rinse them under clean water. Dry with a soft cloth.
Four-step visual guide showing how to use the KUNPHY Ultrasonic Jewelry Cleaner: 1. Pour water, 2. Place item, 3. Add cleaning solution, 4. Press ON/OFF button.
Step-by-step guide for operating the KUNPHY Ultrasonic Jewelry Cleaner.

Items Suitable for Cleaning:

  • Jewelry (rings, necklaces, earrings, bracelets)
  • Lunettes de vue et de soleil
  • Watch coins (waterproof watches only)
  • Dentures and retainers
  • Small metal items
Collage of various items being cleaned by the ultrasonic cleaner, including earrings, glasses, a nose ring, a necklace, rings, and a belly button ring.
Examples of items that can be cleaned using the KUNPHY Ultrasonic Jewelry Cleaner.

Performances de nettoyage :

The cleaner operates at 46KHz, providing 360-degree deep cleaning. The process is designed to be gentle yet effective, removing dirt and grime from hard-to-reach areas without causing damage.

Image illustrating the 46000Hz ultrasonic cleaning process with before and after images of eyeglasses, showing significant cleaning.
Illustration of the 46000Hz ultrasonic cleaning frequency and its effectiveness on eyeglasses.

6. Entretien

Proper maintenance ensures the longevity and optimal performance of your cleaner.

  • Après chaque utilisation : Unplug the device. Empty the water from the tank and wipe the interior with a soft, dry cloth.
  • Nettoyage extérieur : Essuyez l'extérieur de l'appareil avec un chiffon doux.amp Chiffon. N’utilisez pas de nettoyants abrasifs et n’immergez pas l’appareil dans l’eau.
  • Stockage: Conservez le nettoyant dans un endroit frais et sec lorsqu’il n’est pas utilisé.

7. Dépannage

If you encounter issues with your KUNPHY Ultrasonic Jewelry Cleaner, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
L'appareil ne s'allume pas.Pas d'alimentation électrique.Assurez-vous que le cordon d'alimentation est correctement branché à la fois à l'appareil et à une prise électrique fonctionnelle.
Les performances de nettoyage sont médiocres.Insufficient water or no cleaning solution.Ensure the tank is filled to the appropriate level. Consider adding a few drops of liquid dish soap or KUNPHY cleaning solution.
Le voyant rouge clignote.Protection contre la surchauffe activée.Unplug the device and allow it to cool down for a few minutes before attempting to use it again.

8. Spécifications

  • Modèle: BCM-187
  • Capacité du réservoir : 12 onces (350 ml)
  • Fréquence ultrasonique: 46KHz
  • Cycle de nettoyage : 3 minutes (one-touch operation)
  • Dimensions du produit : 7 x 3 x 3 pouces
  • Poids: 1.1 livres
  • Matériau du réservoir: Acier inoxydable SUS 304
  • Niveau de bruit : Less than 45dB (low-noise design)
Image showing the KUNPHY Ultrasonic Jewelry Cleaner with a graphic indicating a low noise level of less than 45dB, comparing it to other common sounds.
The low-noise design of the KUNPHY Ultrasonic Jewelry Cleaner, operating at less than 45dB.

9. Garantie et assistance

KUNPHY provides a Garantie de 12 mois for this product. For any questions or support needs, please contact KUNPHY customer service.

To contact support, navigate to your Amazon account:

  1. Aller à Compte.
  2. Sélectionner Ordres.
  3. Find your order for the KUNPHY Ultrasonic Jewelry Cleaner and click on Détails de la commande.
  4. Locate the 'Sold by: KUNPHY' section and click Poser une question.

© 2023 KUNPHY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.