French Connection Men's Automatic Watch

Introduction

Thank you for choosing the French Connection Men's Automatic Watch, Model FCA13BM. This premium mechanical timepiece combines sophisticated design with reliable automatic movement. This manual provides essential information for the proper setup, operation, maintenance, and care of your watch to ensure its longevity and accurate performance.

Composants de montre

Familiarisez-vous avec les principaux composants de votre montre :

• Couronne: Utilisé pour remonter la montre et régler l'heure.
• Cadran: Features a black skeleton design, showcasing le mouvement mécanique complexe.
• Cas: Square-shaped metal case with a mineral glass dial.
• Sangle: Black stainless steel mesh strap with a deployment clasp.
• Fond du boîtier : Stainless steel case back, often engraved with model and water resistance information.

Figure 1 : Face avant view of the French Connection Automatic Watch, showing the black skeleton dial and stainless steel mesh strap.

Figure 2 : Arrière view of the watch, detailing the stainless steel case back with engravings and the mesh strap with its deployment clasp.

Figure 3 : Côté view de la montre, mettant en valeur la couronne et le boîtier profile.

Installation

1. Enroulement initial

Your automatic watch is powered by the motion of your wrist. If the watch has stopped or is running low on power, it needs to be manually wound to initiate operation:

1. Assurez-vous que la couronne est dans sa position normale, enfoncée.
2. Rotate the crown clockwise approximately 20-30 times. You may hear a slight clicking sound. This provides enough power reserve to start the watch.
3. Once started, wearing the watch regularly will keep it wound through your natural wrist movements.

2. Réglage de l'heure

Pour régler l'heure sur votre montre :

1. Pull the crown out to its outermost position (position 2). The second hand may stop.
2. Rotate the crown either clockwise or counter-clockwise to move the hour and minute hands to the desired time.
3. Once the correct time is set, push the crown back into its normal position (position 0). The second hand will resume movement.

3. Réglage de la sangle

The stainless steel mesh strap features a deployment clasp for secure and comfortable wear. To adjust the length:

1. Open the deployment clasp.
2. Locate the small lever or clasp mechanism on the underside of the strap.
3. Carefully lift the lever to unlock the adjustable part of the clasp.
4. Slide the clasp along the mesh strap to achieve the desired fit.
5. Press the lever back down firmly to secure the clasp in its new position. Ensure it clicks into place to prevent accidental loosening.

Utiliser votre montre

Mouvement automatique

This watch is equipped with an automatic mechanical movement. It does not require a battery. The movement is powered by the natural motion of your wrist. When worn daily, the watch will self-wind and maintain its power reserve. If the watch is not worn for an extended period (typically 36-40 hours), it may stop and will require manual winding as described in the 'Initial Winding' section.

Résistance à l'eau

Your watch has a water resistance rating of 30 meters (3 ATM). This means it is suitable for everyday wear and can withstand splashes, rain, or brief immersion in water. It is pas suitable for swimming, showering, diving, or any water sports where it might be exposed to high-pressure water or prolonged submersion. Always ensure the crown is fully pushed in before any contact with water.

Entretien

Nettoyage

Pour préserver l'apparence de votre montre :

• Essuyez régulièrement le boîtier et le verre avec un chiffon doux, sec et non pelucheux.
• Pour le bracelet en acier inoxydable, un léger damp Un chiffon peut être utilisé, suivi d'un séchage immédiat. Évitez d'utiliser des produits chimiques agressifs ou des matériaux abrasifs.
• If the watch has been exposed to saltwater, rinse it gently with fresh water and dry thoroughly with a soft cloth.

Stockage

When not wearing your watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. A watch box or pouch is recommended to protect it from dust and scratches.

Entretien régulier

Like any precision mechanical instrument, your automatic watch benefits from periodic professional servicing. It is recommended to have your watch inspected and serviced by an authorized watchmaker every 3-5 years to ensure optimal performance and water resistance integrity.

Dépannage

Si vous rencontrez des problèmes avec votre montre, consultez la section suivante consacrée aux problèmes courants et à leurs solutions :

• La montre s'est arrêtée : Manually wind the watch by rotating the crown clockwise 20-30 times. Ensure it is worn regularly to maintain power reserve.
• L'heure est inexacte : Ensure the watch is fully wound. If it continues to be significantly inaccurate, it may require professional adjustment or servicing.
• Condensation sous cristal : This indicates a potential breach in water resistance. Immediately take the watch to a qualified watchmaker for inspection and repair to prevent further damage.
• Strap feels loose/tight: Re-adjust the deployment clasp as described in the 'Adjusting the Strap' section.

Pour tout problème non traité ici, veuillez contacter le service client.

Caractéristiques

Informations sur la garantie

Cette montre French Connection est livrée avec un Garantie limitée. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage. The warranty typically covers manufacturing defects under normal use.

Pour toute réclamation au titre de la garantie ou pour toute demande de service après-vente, veuillez conserver votre preuve d'achat.

Manufacturer & Importer Contact:

Fabricant: ILG ASIA LIMITED, Unit 401-406, 4/F, New East Ocean center. No.9 Science Meseum Tst, Kow Loon CT C Bonia Chiu Hong Kong.
Importateur/emballeur (Inde) : ILG INDIA FASHION LLP, Pinnacle Business Park, S7-09, Seven Floor, Mahakali Caves Road, Andheri (E), Mumbai - 400093, India.

Assistance clientèle

Should you require further assistance, have questions about your watch, or need to arrange for service, please contact the authorized French Connection customer support in your region. Refer to the contact information provided with your warranty documentation or visit the official French Connection website pour les détails de l'assistance.

Always ensure that any repairs or servicing are carried out by authorized service centers to maintain the validity of your warranty and the integrity of your timepiece.