CYCLAMI A2MAX 150PSI Mini Electric Bicycle Pump User Manual

1. Introduction

Thank you for choosing the CYCLAMI A2MAX Mini Electric Bicycle Pump. This compact and portable pump is designed for convenient and efficient tire inflation, featuring a digital pressure gauge and an automatic stop function. It supports both Presta and Schrader valves, making it suitable for a wide range of bicycles, including road and mountain bikes.

Image 1.1: The CYCLAMI A2MAX pump, showcasing its classic design and compact form factor.

Image 1.2: The compact size of the A2MAX pump, easily held in one hand for portability.

2. Contenu de la boîte

Veuillez vérifier le contenu du colis pour vous assurer que tous les éléments sont présents :

• CYCLAMI A2MAX Mini Electric Bicycle Pump
• Câble de charge de type C
• Adaptateur de valve Presta
• Adaptateur de valve Schrader
• Inflatable Extension Tube (flexible hose)
• Housse de protection en silicone

Image 2.1: Included accessories: Presta valve, Schrader valve, protective cover, and inflatable extension tube.

3. Installation

3.1 Remplissage de la pompe

Before first use, fully charge the pump. Connect the provided Type-C charging cable to the pump's charging port and to a suitable USB power source. The battery indicator on the digital display will show the charging status. A full charge takes approximately 1.1 hours.

Image 3.1: The pump connected via its Type-C port for charging.

3.2 Fixation du tuyau et des adaptateurs

1. Screw the inflatable extension tube securely onto the pump's air outlet.
2. Depending on your tire valve type (Presta or Schrader), attach the appropriate adapter to the other end of the extension tube.

3.3 Mise sous tension et sélection de l'unité

1. Press the power button to turn on the pump. The digital display will illuminate.
2. To switch between pressure units (PSI or Bar), press the '+' and '-' buttons simultaneously.

Image 3.2: The digital display screen indicating pneumatic pressure, battery level, and unit selection.

4. Mode d'emploi

4.1 Connecting to the Tire

Securely attach the appropriate valve adapter on the extension tube to your tire's valve stem. Ensure a tight connection to prevent air leakage.

4.2 Réglage de la pression souhaitée

1. Une fois connecté, l'écran numérique affichera la pression actuelle des pneus.
2. Use the '+' and '-' buttons to set your desired target pressure. The pump supports a maximum pressure of 150 PSI.

Image 4.1: The pump connected to a tire, displaying the preset pressure and indicating automatic stop when full.

4.3 Démarrage et arrêt de l'inflation

1. Press the power button to start inflation. The pump will begin to inflate the tire.
2. The pump will automatically stop once the preset pressure is reached. You can also manually stop inflation by pressing the power button again.

4.4 Remarques importantes

• The pump may generate heat during prolonged use. Use the protective silicone cover to handle the pump safely.
• The pump produces a certain level of noise during operation (over 80dB). It is recommended to use it outdoors.

5. Entretien

• Nettoyage: Essuyez la pompe avec un chiffon doux et sec.amp cloth. Do not use harsh chemicals or immerse the pump in water.
• Stockage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged if storing for extended periods.
• Entretien de la batterie: To prolong battery life, avoid fully discharging the pump frequently. Recharge it regularly, even if not in active use.
• Housse de protection : Always use the provided silicone protective cover to prevent scratches and protect against heat during operation.

6. Dépannage

• La pompe ne s'allume pas : Assurez-vous que la batterie est chargée. Branchez-la à une source d'alimentation et réessayez.
• La pompe ne gonfle pas : Check if the extension tube and valve adapter are securely connected to both the pump and the tire valve. Ensure the desired pressure is set above the current tire pressure.
• Lecture de pression inexacte : Ensure the valve connection is tight. If issues persist, contact customer support.
• Surchauffe: If the pump becomes excessively hot, allow it to cool down before further use. This is normal during prolonged inflation.

7. Spécifications

Image 7.1: Illustration of the pump's high-performance motor, capable of 150 PSI output.

8. Garantie et assistance

For warranty information or technical support, please refer to the product packaging or contact CYCLAMI customer service directly. Keep your purchase receipt for warranty claims.