Manuel d'utilisation de l'enceinte Bluetooth portable sans fil OHAYO S6 40W

Introduction

Thank you for choosing the OHAYO S6 40W Wireless Portable Bluetooth Speaker. This speaker is designed to deliver powerful, clear stereo sound with dynamic RGB lighting, making it ideal for various environments including home, parties, travel, and outdoor activities. Its IPX7 waterproof rating ensures durability against water exposure, and the long-lasting battery provides extended playtime. Please read this manual carefully to ensure proper use and optimal performance of your device.

Qu'y a-t-il dans la boîte

OHAYO S6 Portable Bluetooth Speaker
Câble de chargement USB-C
Câble audio AUX
Quick Start Guide (Instruction Manual)

OHAYO S6 speaker with charging cable and AUX cable — Image: The OHAYO S6 speaker shown alongside its included USB-C charging cable and AUX audio cable.

Produit terminéview

The OHAYO S6 speaker features a durable, black mesh exterior with a convenient carrying strap. The top panel houses intuitive controls, while the rear panel provides access to various input ports.

Contrôles

Bouton d'alimentation (⏻)Appuyez longuement pour allumer/éteindre.
Bouton Mode (M): Short press to switch between Bluetooth, AUX, and TF Card modes.
Volume bas (-) / Piste précédente: Short press for volume down; long press for previous track.
Bouton Lecture/Pause (▶): Short press to play/pause; answer/end calls.
Augmenter le volume (+) / Piste suivante: Short press for volume up; long press for next track.
TWS Pairing Button (∞)Appuyez pour lancer le jumelage True Wireless Stereo.
Bass Boost Button (BASS): Press to activate/deactivate enhanced bass.

Haut view of OHAYO S6 speaker showing control buttons — Image: A close-up of the OHAYO S6 speaker's top panel, highlighting the power, mode, volume, play/pause, TWS, and bass boost buttons.

Ports

Port de chargement USB-C: Pour recharger l'enceinte.
Port d'entrée AUX: Pour une connexion audio filaire utilisant le câble AUX.
Fente pour carte TF: Pour lire de la musique directement depuis une carte TF (MicroSD).

Installation

Charger l'enceinte

Connectez le câble de chargement USB-C fourni au port USB-C de l'enceinte.
Connectez l'autre extrémité du câble à un adaptateur secteur USB (non inclus) ou au port USB d'un ordinateur.
Le voyant LED indiquera l'état de charge et s'éteindra une fois la charge complète.

Appariement Bluetooth

Appuyez et maintenez enfoncé le bouton d'alimentation (⏻) to turn on the speaker. The LED indicator will flash, indicating it's in pairing mode.
Sur votre appareil mobile, activez Bluetooth et recherchez les appareils disponibles.
Select "OHAYO S6" from the list of devices. Once connected, the LED indicator will remain solid.

Couplage True Wireless Stereo (TWS)

TWS allows you to connect two OHAYO S6 speakers for a more immersive stereo sound experience.

Ensure both OHAYO S6 speakers are powered off.
Allumez la première enceinte. Ce sera votre enceinte principale.
Press the TWS button (∞) on the primary speaker. It will enter TWS pairing mode.
Power on the second speaker. It will automatically search for and connect to the primary speaker.
Once successfully paired, the primary speaker's LED will indicate TWS connection.
Connect your mobile device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.

Two OHAYO S6 speakers wirelessly paired outdoors — Image: Two OHAYO S6 speakers are shown wirelessly connected on an outdoor table, demonstrating the TWS pairing feature.

Mode d'emploi

Lecture audio de base

Lecture/Pause: Press the Play/Pause button (▶).
Réglage du volumeAppuyez brièvement sur les boutons Volume + ou Volume -.
Piste suivante/précédente: Long press the Volume Up (+) for next track or Volume Down (-) for previous track.

Sélection du mode

Press the Mode button (M) to cycle through available input sources: Bluetooth, AUX, and TF Card.

Renforcement des basses

Press the Bass Boost button (BASS) to enhance the low-frequency audio output for a deeper bass experience. Press again to deactivate.

Appels mains libres

When connected via Bluetooth, the built-in microphone allows for hands-free calls. Press the Play/Pause button (▶) to answer or end a call.

Éclairage LED dynamique

The speaker features dynamic RGB LED lights that add a visual element to your music. The lighting patterns are pre-programmed and activate automatically.

Entretien

Protection contre l'eau (IPX7)

The OHAYO S6 speaker has an IPX7 waterproof rating, meaning it can be submerged in water up to 1 meter for 30 minutes. To maintain its waterproof integrity:

Assurez-vous que le clapet en caoutchouc recouvrant les ports de chargement et AUX est bien fermé avant d'exposer l'enceinte à l'eau.
After exposure to saltwater or chlorinated water, rinse the speaker with fresh water and allow it to air dry completely before charging or using the ports.

Nettoyage

Essuyez le haut-parleur avec un chiffon doux, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.

Stockage

Rangez l'enceinte dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.

Dépannage

Problème	Cause possible	Solution
Le haut-parleur ne s'allume pas.	Batterie faible.	Chargez l'enceinte à l'aide du câble USB-C fourni.
Aucun son ou volume faible.	Volume too low on speaker or connected device; incorrect input mode; device not connected.	Increase volume on both speaker and device. Press 'M' to select correct input mode. Re-pair Bluetooth device.
Impossible de coupler via Bluetooth.	Speaker not in pairing mode; Bluetooth disabled on device; too many devices connected.	Ensure speaker is on and LED is flashing. Enable Bluetooth on your device. Disconnect other Bluetooth devices.
Mauvaise qualité sonore.	Distance from device too far; obstacles between speaker and device; low quality audio source.	Move device closer to speaker. Remove obstacles. Try a different audio source.
L'appairage TWS a échoué.	Procédure d'appairage incorrecte ; enceintes trop éloignées l'une de l'autre.	Ensure both speakers are OHAYO S6 and follow TWS pairing steps carefully. Keep speakers within close proximity during pairing.

Caractéristiques

Nom du modèle: S6-Black
Puissance de sortie maximale du haut-parleur: 40 watts
Capacité de la batterie: 6600 mAh
Récréation: Up to 15 hours (at 50% volume)
Indice d'étanchéité: IPX7
Technologie de connectivité: Bluetooth, AUX, TF Card, USB
Technologie de communication sans fil: Bluetooth
Mode de sortie audio: Stéréo
Dimensions du produit: 8.67 po P x 3.7 po L x 2.83 po H
Poids de l'article: 1.63 livres (0.74 kilogrammes)
Réponse en fréquence: 2000 KHz (Note: This value is as provided in product specifications. Typical frequency response ranges are broader.)
Méthode de contrôle: Toucher
Appareils compatibles: Gaming Console, Laptop, MP3 Player, Smartphone, Tablet, Television

Interne view of OHAYO S6 speaker showing 40W Hi-Res Sound drivers — Image : Une explosion view of the OHAYO S6 speaker, illustrating its internal 40W Hi-Res Sound drivers for clear highs and deep lows.

OHAYO S6 speaker with 15H battery life indicator — Image: A graphic depicting the OHAYO S6 speaker with a clock icon, indicating its long battery life of up to 15 hours.

Garantie et assistance

Informations sur la garantie

This product comes with a Limited Warranty. Please refer to the warranty card included in your packaging for specific terms and conditions.

Assistance clientèle

For any inquiries, technical assistance, or support regarding your OHAYO S6 speaker, please contact our customer support team. We offer 24-hour customer support and facilitate easy, hassle-free returns and replacements. Support for an extended term of service is also available.

OHAYO S6