1. Produit terminéview
The FLEXISPOT 36" Sit-Stand Desk Converter is designed to transform your existing desk into an active sit-stand workstation. This unit features a two-tier design, providing a spacious upper desktop for monitors and a lower keyboard tray for a keyboard and mouse. It allows for seamless transitions between sitting and standing positions to promote a healthy work routine.
Image: The FLEXISPOT 36" Sit-Stand Desk Converter shown in a typical office environment, demonstrating its two-tier design and how it integrates with an existing desk setup.
Caractéristiques principales :
- Conception ergonomique à 2 niveaux : Provides separate surfaces for monitors and keyboard/mouse, optimizing ergonomic posture.
- Espace de travail spacieux : Upper desktop (36" x 16.3") accommodates monitors up to 27 inches. Lower keyboard tray (34.6" x 12.2") fits a standard keyboard and mouse or a 13-inch laptop.
- Réglage de la hauteur : Smoothly transitions between 4.7 inches and 19.6 inches.
- Construction robuste : Supporte jusqu'à 33 kg sur le bureau et 6.6 kg sur le plateau du clavier.
Image : Vue de dessus view illustrating the spacious two-tier design of the desk converter, highlighting the dimensions of the upper desktop and lower keyboard tray.
2. Instructions de configuration
The FLEXISPOT Sit-Stand Desk Converter requires minimal assembly. Follow these steps to prepare your workstation.
- Déballer les composants : Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided in this manual, refer to your product box).
- Positionner la base : Place the main base unit of the converter onto your existing desk in the desired location. Ensure it is stable and centered.
- Fixer le plateau du clavier : The keyboard tray typically attaches to the main unit with a few screws. Align the tray with the designated attachment points and secure it using the provided hardware. (Note: Specific screw types and locations may vary; refer to the quick start guide included in your product packaging for detailed diagrams.)
- Place Monitors/Laptop: Position your monitors or laptop on the upper desktop surface. Ensure they are stable and do not exceed the weight capacity of 33 lbs.
- Organiser les câbles : Route all cables (monitor, keyboard, mouse, power) to prevent interference with the height adjustment mechanism.
Your FLEXISPOT desk converter is now ready for use.
3. Mode d'emploi
The desk converter features a quick-adjust mechanism for effortless height changes.
- To Raise the Workstation:
- Locate the height adjustment lever, usually on the side of the upper desktop.
- Grasp the lever firmly and squeeze it to release the locking mechanism.
- While holding the lever, gently lift the desktop to your desired standing height. The internal spring system will assist in the lift.
- Release the lever to lock the workstation securely in place. Ensure it is fully locked before placing weight on it.
- To Lower the Workstation:
- Grasp the height adjustment lever firmly and squeeze it to release the locking mechanism.
- While holding the lever, gently push down on the desktop to lower it to your desired sitting height. Control the descent to prevent sudden drops.
- Relâchez le levier pour verrouiller le poste de travail en toute sécurité.
Image : Un côté profile of the desk converter illustrating its height adjustment range, showing the mechanism for raising and lowering the workstation.
Image: The FLEXISPOT desk converter fully extended to a standing position, set up with dual monitors, a keyboard, and a mouse, demonstrating its use for sit-to-stand transitions.
4. Entretien
Proper maintenance ensures the longevity and smooth operation of your FLEXISPOT desk converter.
- Nettoyage: Essuyez les surfaces avec un chiffon doux, damp tissu. Évitez les nettoyants abrasifs ou les produits chimiques agressifs qui pourraient endommager la finition.
- Vérification du mécanisme : Periodically inspect the height adjustment mechanism for any signs of wear or loose components.
- Capacité de poids : Do not exceed the specified weight capacities (33 lbs for desktop, 6.6 lbs for keyboard tray) to prevent damage and ensure safe operation.
- Gestion des câbles: Regularly check that cables are not pinched or obstructing the movement of the desk converter.
5. Dépannage
If you encounter issues with your desk converter, refer to the following common solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Workstation is difficult to raise. | Excessive weight on the desktop; internal spring mechanism requires more force. | Ensure the total weight on the desktop does not exceed 33 lbs. Apply steady, upward force while engaging the lever. If the issue persists, contact customer support. |
| Workstation does not lock at desired height. | Lever not fully released; mechanism obstruction. | Release the height adjustment lever completely. Check for any obstructions around the locking mechanism. |
| Workstation wobbles. | Uneven surface; loose connections. | Ensure the desk converter is placed on a flat, stable surface. Check all assembly screws to ensure they are tightened. |
6. Spécifications
Detailed specifications for the FLEXISPOT 36" Sit-Stand Desk Converter.
- Modèle: B0DMSK6RF8
- Marque: FLEXIPOT
- Couleur: Noir classique
- Matériel: Métal, bois
- Dimensions du bureau : 36 po (L) x 16.3 po (P)
- Keyboard Tray Dimensions: 34.6 po (L) x 12.2 po (P)
- Dimensions de la base: 27.4 po (L) x 15.5 po (P)
- Plage de réglage de la hauteur : 4.7" - 19.6"
- Capacité de poids du bureau : 33 livres
- Keyboard Tray Weight Capacity: 6.6 livres
- Poids de l'article : Environ 25.57 livres
- Overall Item Dimensions (L x W x H): 24.9 x 36 x 19.6 inches (at max height)
- Assemblage requis : Oui (minimal)
- Code à barres : 840460420150
Image: A diagram showing the precise measurements of the desk converter, including desktop, keyboard tray, base dimensions, and height adjustment range, along with weight capacities.
7. Garantie et assistance
For warranty information, technical support, or to inquire about replacement parts, please contact FLEXISPOT customer service directly. Refer to the contact information provided in your product packaging or visit the official FLEXISPOT website.
FLEXISPOT Official Website: www.flexispot.com