DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Principales caractéristiques

• Prise en charge étendue du stockage : Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ample espace pour le stockage des données.
• Montage vertical du GPU : Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Compatibilité de la carte mère : Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Prise en charge avancée du refroidissement : Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Flux d'air optimisé : Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Connectivité du panneau avant : Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Spécifications

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Guide de configuration

4.1. Préparation du dossier

1. Déballez la valise : Carefully remove the computer case from its packaging.
2. Retirer les panneaux latéraux : Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Inspectez les accessoires : Verify all included accessories (screws, cable ties, manual) are present.

4.2. Installation de la carte mère

1. Installer les entretoises : Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. Installer le panneau d'E/S : Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Monter la carte mère : Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Installation de la carte graphique (GPU)

• Installation standard: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Installation verticale : The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Configuration du système de refroidissement

• Ventilateurs préinstallés : The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Gestion des câbles

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Image : éclatée view of the case showing removable panels and internal structure.

Image : Intérieur arrière view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Mode d'emploi

• Marche/Arrêt : Use the power button located on the top front panel to turn the system on or off.
• Bouton de réinitialisation : The reset button is also on the top front panel for system restarts.
• Ports du panneau avant: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Entretien

• Nettoyage du filtre à poussière : The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Nettoyage interne : Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Dépannage

• Le système ne s'allume pas :
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Vérifiez toutes les connexions d'alimentation internes (ATX 24 broches, alimentation du processeur, alimentation du GPU).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Aucune sortie d'affichage :
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Réinsérez la carte graphique et les modules de RAM.
• Problèmes de surchauffe :
  • Ensure all case fans are spinning and connected correctly.
  • Nettoyer les filtres à poussière et les composants internes.
  • Verify CPU cooler is properly seated and making good contact with the CPU.
• Lecteur non détecté :
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Garantie et assistance

The DARKROCK Classico Max computer case comes with a Garantie de 1 ans À compter de la date d'achat, cette garantie couvre les défauts de fabrication et les vices de matériaux dans des conditions normales d'utilisation.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webConsultez leur site web ou contactez leur service client. Conservez votre preuve d'achat pour faire valoir la garantie.

Official DARKROCK Store: DARKROCK Amazon Store

9. Galerie multimédia

Image : Face avant view of the DARKROCK Classico Max computer case.

Image : Intérieure view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Image : éclatée view of the case showing removable panels and internal structure.

Image : Intérieur arrière view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Vidéos