Chaise de bureau ergonomique Hbada E2

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Hbada E2 Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Consignes de sécurité

• Always follow the instructions provided with the chair for proper assembly and use.
• Be cautious when adjusting the chair's parts and when using the reclining function to avoid injury.
• Ne dépassez pas la capacité de poids maximale du fauteuil.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten as needed.
• Tenez les enfants et les animaux domestiques éloignés de la chaise pendant le montage.

Contenu du colis

Avant de commencer l'assemblage, vérifiez que tous les composants sont présents et non endommagés. L'emballage doit comprendre :

• Chair Base with Wheels
• Cylindre pneumatique
• Coussin de siège
• Dossier
• Appuie-tête
• Accoudoirs (2)
• Footrest (if included with your model)
• Matériel de montage (vis, rondelles, clé Allen)
• Manuel d'instructions

Image: All chair components and hardware neatly organized for assembly.

Configuration et assemblage

Assembly typically takes approximately 30 minutes. Only the provided Allen wrench is required.

1. Assemblez la base : Attach the wheels to each leg of the chair base.
2. Insérer le vérin pneumatique : Place the air pneumatic cylinder into the center hole of the assembled base.
3. Fixer le repose-pieds : Secure the footrest mechanism to the underside of the seat cushion.
4. Installer les accoudoirs : Screw both armrests into their designated positions on the underside of the seat cushion.
5. Connectez le dossier : Attach the backrest support to the back of the seat cushion using the provided screws.
6. Combine Seat and Base: Carefully place the assembled seat and backrest onto the pneumatic cylinder, ensuring it is firmly seated.
7. Fixer l'appui-tête : Slide the headrest onto the top of the backrest until it clicks into place or is securely fastened.

Image: The Hbada E2 Ergonomic Office Chair fully assembled and ready for use.

Instructions d'utilisation et réglages

The Hbada E2 chair offers multiple adjustment options for personalized comfort:

• Réglage de la hauteur de la chaise : Utilisez le levier situé sous le siège pour régler la hauteur de la chaise. Tirez le levier vers le haut en position assise pour abaisser la chaise, ou vers le haut en position debout pour la relever.
• 6-Way Adjustable Lumbar Support: The lumbar support can be adjusted vertically (up to 2.36 inches), forward and backward (up to 1.97 inches), and floats 10 degrees left and right. This provides comprehensive support for your lower back.


Image : détaillée view of the 6-way adjustable lumbar support mechanism.

• Accoudoirs réglables en 3D : Adjust the armrests in three dimensions: height (up to 2.95 inches), forward and backward (up to 1.97 inches), and rotation (40 degrees left and right). This allows for optimal elbow and arm support.


Image: Illustration of the multi-directional adjustments for the armrests.

• 3D Adjustable Headrest: The headrest can be adjusted vertically (up to 3.93 inches), forward and backward (up to 1.57 inches), and rotated 60 degrees to support various heights and body types, relieving neck pressure.


Image: Visual guide for adjusting the headrest for optimal neck support.

• Reclining Function with 3 Lockable Angles: The chair reclines up to 135 degrees. Use the lever to adjust and lock the tilt at 90 degrees (comfortable office), 115 degrees (leisure and entertainment), or 138 degrees (short nap).


Image: Different reclining positions of the chair for various activities.

• Repose pieds: If your model includes a footrest, it can be pulled out from under the seat and flipped over to provide leg support for relaxation.

Caractéristiques principales

• Conception ergonomique innovante : The Hbada E2 incorporates advanced technology for comfortable posture, featuring an adjustable headrest, 6-way adjustable lumbar support, 3D armrests, breathable mesh fabric, reclining function, and a gravity-sensing chassis.
• Tissu en maille respirante : The chair features a completely breathable and durable mesh design for improved air permeability and comfort, especially during long periods of use.


Image: Detail of the breathable mesh material used in the chair's construction.

• Gravity-Sensing Functional Chassis: Allows for smooth reclining at different user weights.
• Aluminum Alloy Wired Control Adjustment: Provides one-button control for adjustments without needing to bend down.


Image: Close-up of the wired control lever for convenient adjustments.

• Composants durables : Features an SGS certified gas lift, PU-wrapped silent casters, and a high-load-bearing metal five-claw base for stability and longevity.


Image: Key durable components of the chair, including the gas lift, casters, and base.

• BIFMA Standard Tested: Tested for a 10-year lifespan, including 120,000 backrest push tests, 102kg backrest pull tests, 60,000 armrest adjustment tests, 120,000 times 78kg load tests, 120,000 gas lift height adjustment tests, and 100,000 caster rolling tests.


Image: Summary of durability tests passed by the chair.

Entretien

• Nettoyage: Essuyez les surfaces en maille et en plastique avec un produit nettoyant pour vitres.amp chiffon et savon doux. Évitez les produits chimiques agressifs.
• Inspection: Vérifiez régulièrement le serrage de tous les boulons et vis. Resserrer si nécessaire.
• Entretien des roulettes : Pour assurer un roulement fluide, veillez à ce que les roulettes soient exemptes de cheveux et de débris.
• Ascenseur de gaz: Ne tentez pas de démonter le vérin à gaz. En cas de dysfonctionnement, contactez le service client.

Dépannage

• Grincements de chaises : Check and tighten all assembly screws. A small amount of silicone spray on moving parts may help.
• La hauteur de la chaise n'est pas réglable : Ensure the pneumatic cylinder is correctly installed and the lever mechanism is functioning. If issues persist, the gas lift may need replacement.
• Roulettes ne roulant pas correctement : Nettoyez les roulettes de tout débris (cheveux, poussière).
• Backrest/Armrests Feel Loose: Re-tighten the screws connecting these components to the seat.

Caractéristiques

Garantie et assistance

Hbada is committed to providing high-quality products and customer satisfaction. For any issues or inquiries, please contact Hbada customer support.

• Remplacement des pièces : Parts are replaced, not repaired.
• Politique de retour: Politique de retour de 30 jours.
• Guaranteed Price: 15-day guaranteed price.
• Endommagé à l'arrivée : Repair and replacement guaranteed.

Additional protection plans may be available for purchase, offering extended coverage for 2 or 3 years.