Manuel d'instructions du convertisseur de bureau assis-debout FLEXISPOT 36 pouces (modèle MT137)

1. Introduction

This manual provides instructions for the assembly, operation, and maintenance of your FLEXISPOT 36-inch Standing Desk Converter, Model MT137. This height-adjustable workstation is designed to facilitate seamless transitions between sitting and standing positions, promoting a more dynamic and ergonomic work environment. It accommodates dual monitors and laptops, featuring a wide keyboard tray for enhanced comfort and productivity.

2. Consignes de sécurité

Consignes de sécurité importantes :

• Always secure the desk converter to your existing desk to prevent tipping.
• Read and follow all assembly instructions carefully to ensure safe and proper use.
• Do not place your hands near the strut during adjustments. The angle of the strut joints will change during the adjustment of the desktop height and may cause injury.
• Ensure the desk converter is placed on a stable, level surface.
• Do not overload the desk converter. Refer to the specifications section for maximum weight capacities.
• Keep children and pets away from the desk converter during operation.

3. Installation

The FLEXISPOT Standing Desk Converter is designed for quick and straightforward assembly. Most of the unit comes pre-assembled.

3.1 Contenu du paquet

Vérifiez que tous les composants sont présents avant de commencer l'assemblage :

• Unité de conversion du bureau principal
• Plateau pour clavier
• Mounting Hardware for Keyboard Tray
• Manuel d'instructions

3.2 Étapes d'assemblage

1. Déballer l'appareil : Carefully remove all components from the packaging. Place the main desk converter unit on your existing desk in the desired position.
2. Fixez le plateau du clavier : Align the keyboard tray with the designated attachment points on the main unit. Secure the tray using the provided mounting hardware (screws, brackets). Ensure it is firmly attached.
3. Gestion des câbles: Utilize the integrated cable management clips (if included) to organize any power or display cables, preventing clutter and ensuring smooth operation during height adjustments.
4. Dispositifs de placement : Position your monitor(s) or laptop on the upper desktop surface. Place your keyboard and mouse on the attached keyboard tray.

Figure 1: Fully assembled FLEXISPOT Standing Desk Converter with dual monitors and a laptop.

Figure 2: Illustration of attaching the keyboard tray to the main unit.

3.3 Vidéo d'assemblage

4. Mode d'emploi

The FLEXISPOT Standing Desk Converter features a gas spring system for smooth and effortless height adjustments.

4.1 Réglage de la hauteur

1. Augmenter: Locate the adjustment lever, typically on the side of the upper desktop. Squeeze the lever and gently lift the desktop to your desired standing height. Release the lever to lock the desk in place.
2. Baisser: Squeeze the adjustment lever and apply gentle downward pressure on the desktop. Guide the desktop down to your preferred sitting height. Release the lever to lock the desk in place.

Figure 3: Close-up of the height adjustment lever and gas spring mechanism.

Figure 4: Visual representation of the desk converter's adjustable height range (4.7 to 16.6 inches).

4.2 Dual-Tier Design

The converter features a two-tier design:

• Upper Desktop: Designed to hold monitors or a laptop, keeping your screen at an ergonomic eye level.
• Plateau inférieur du clavier : Provides space for your keyboard and mouse, allowing your wrists to remain in a neutral position. The U-shaped design of the upper deck also allows for a laptop to be placed directly on the keyboard tray if preferred.

Figure 5: The dual-tier design providing ample space for monitors, laptop, keyboard, and mouse.

5. Entretien

To ensure the longevity and optimal performance of your FLEXISPOT Standing Desk Converter, follow these maintenance guidelines:

• Nettoyage: Essuyez les surfaces avec un chiffon doux, damp Chiffon. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
• Inspection: Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
• Mouvement: Ensure the gas spring mechanism operates smoothly. If you notice any stiffness or unusual sounds, contact customer support. Do not attempt to lubricate or repair the gas spring yourself.
• La répartition du poids: Always distribute weight evenly across the desktop and keyboard tray to prevent strain on the mechanism.

6. Dépannage

If you encounter any issues with your desk converter, refer to the following common problems and solutions:

If the problem persists, please contact FLEXISPOT customer support for further assistance.

7. Spécifications

Figure 6: Detailed dimensions and weight capacities of the FLEXISPOT Standing Desk Converter.

8. Garantie et assistance

8.1 Informations sur la garantie

This FLEXISPOT product comes with a Full Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty card included with your product or visit the official FLEXISPOT website.

8.2 Assistance clientèle

For technical assistance, troubleshooting, or inquiries regarding your product, please contact FLEXISPOT customer support. Contact information can be found on the official FLEXISPOT websur votre site ou sur l'emballage de votre produit.

Ressources en ligne :

• Visitez le site officiel Magasin FLEXISPOT pour obtenir des informations et une assistance sur les produits.