1. Introduction
The SwitchBot Smart Relay Switch 1 is a compact, intelligent relay module designed to integrate traditional electrical appliances and lighting into your smart home system. Featuring an integrated Bluetooth repeater and Matter compatibility, it offers versatile control options and enhances your smart home network.
Qu'y a-t-il dans la boîte
- SwitchBot Smart Relay Switch 1
Please ensure all components are present and undamaged before proceeding with installation.
2. Consignes de sécurité
AVERTISSEMENT: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical systems. Incorrect installation can lead to electric shock, fire, or other hazards. Always disconnect power at the circuit breaker before installation or maintenance.
- Ne pas dépasser la charge maximale admissible de 16 A.
- Ensure proper wiring connections according to local electrical codes.
- L'appareil est conçu pour une utilisation en intérieur uniquement.
- Tenir hors de portée des enfants.
3. Configuration et installation
The SwitchBot Smart Relay Switch 1 is designed for quick installation, typically within 10 minutes, and fits into most standard switch boxes without extensive rewiring.
3.1 Wiring Diagram (AC Load)
This diagram illustrates connecting the relay switch to an AC load, such as a light fixture. Ensure Live (L) and Neutral (N) connections are correct.
3.2 Wiring Diagram (Dry Contact Mode)
This diagram shows how to wire the relay switch for dry contact applications, compatible with low-voltage devices like automatic gates or doorbells.
3.3 Installation physique
The compact design allows the relay switch to be installed discreetly behind existing wall switches or within junction boxes.
- Éteindre: Before any wiring, turn off the main power supply at your circuit breaker.
- Connecter les fils : Follow the appropriate wiring diagram (AC Load or Dry Contact) to connect the relay switch to your electrical circuit.
- Appareil sécurisé : Place the relay switch securely within the switch box or junction box.
- Restaurer l'alimentation : Remettez l'alimentation principale en marche.
- Couplage d'applications: Download the SwitchBot app from your device's app store. Follow the in-app instructions to add and pair your Smart Relay Switch 1.
4. Mode d'emploi
The SwitchBot Smart Relay Switch 1 offers multiple ways to control your connected devices.
4.1 Control Options Overview
The relay switch supports remote control via Wi-Fi, local control via Bluetooth, voice commands, timers, and smart scenes.
4.2 App Control (Wi-Fi & Bluetooth)
Use the SwitchBot app to turn devices on/off, set schedules, and configure smart scenes. Remote control is available via Wi-Fi, while local control is possible via Bluetooth even without an internet connection.
4.3 Commande vocale
With Matter compatibility, the relay switch integrates directly with Alexa, Apple Home, Google Home, and SmartThings. Use voice commands for hands-free control (a compatible smart speaker is required).
4.4 Scénarios intelligents et automatisation
Create custom smart scenes within the SwitchBot app or your preferred smart home platform. For example, automatically turn on lights when a door opens (requires a SwitchBot Contact Sensor) or based on motion detection (requires a SwitchBot Motion Sensor).
Set personalized schedules for your devices, such as turning off corridor lights at a preset time or automating garden irrigation based on temperature and humidity when paired with a SwitchBot Meter.
5. Caractéristiques
5.1 Matter Compatibility
The SwitchBot Smart Relay Switch 1 is Matter-certified, allowing direct connection and control via Alexa, Apple Home, Google Home, and SmartThings without requiring an additional hub (a compatible Matter controller is needed).
5.2 Integrated Bluetooth Repeater
This device includes a built-in Bluetooth repeater, supporting up to 10 other SwitchBot Bluetooth sub-devices simultaneously. This extends the range and reliability of your SwitchBot ecosystem.
5.3 Conception compacte
With dimensions of 42mm x 36mm x 16mm, the relay switch is ultra-compact, allowing it to fit into most standard switch and outlet boxes without requiring extensive modifications.
5.4 Safety and Reliability
The device features a V0 flame-retardant body and over-temperature protection, ensuring safety by cutting power during emergencies. It also includes power-off memory, returning to its previous state after a power outage.
5.5 ESP32 Processor
Equipped with an ESP32 processor, the relay switch provides enhanced communication, data transmission, and intelligent control efficiency.
6. Entretien
The SwitchBot Smart Relay Switch 1 requires minimal maintenance.
- Nettoyage: Use a dry, soft cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols.
- Mises à jour du micrologiciel : Periodically check the SwitchBot app for available firmware updates to ensure optimal performance and access to new features.
- Conditions environnementales : Veillez à utiliser l'appareil dans les plages de température et d'humidité spécifiées afin d'éviter tout dommage.
7. Dépannage
If you encounter issues with your SwitchBot Smart Relay Switch 1, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne répond pas aux commandes de l'application. | No power, Wi-Fi/Bluetooth disconnected, app issue. | Check power supply. Verify Wi-Fi/Bluetooth connection in the app. Restart the app. |
| Cannot pair with the app. | Incorrect pairing mode, Wi-Fi signal weak, device too far. | Ensure the device is in pairing mode. Move closer to your router/phone. Check Wi-Fi signal strength. |
| La commande vocale ne fonctionne pas. | Matter controller not set up, incorrect voice command, internet issue. | Verify Matter integration in your smart home platform. Use correct voice commands. Check internet connection. |
| L'appareil connecté ne s'allume/ne s'éteint pas. | Incorrect wiring, faulty appliance, relay issue. | Débranchez d’abord l’alimentation. Recheck wiring according to diagrams. Test the appliance directly. Contact support if the relay is suspected to be faulty. |
If the problem persists after trying these solutions, please contact SwitchBot customer support.
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | W5502300 |
| Dimensions du produit | 4.2 x 1.6 x 3.6 cm |
| Poids de l'article | 112 grammes |
| Courant nominal | 16 Ampavant |
| Type de contact | Normalement ouvert |
| Type de montage | Through Hole Mount |
| Mode de fonctionnement | Automatique |
| Connectivité | Wi-Fi (2.4GHz), Bluetooth, Matter |
| Compatibilité | Alexa, Apple Home, Google Home, SmartThings |
| Caractéristiques de sécurité | V0 Flame-retardant body, Over-temperature protection, Power-off memory |
9. Garantie et assistance
SwitchBot products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official SwitchBot website.
For technical support, troubleshooting assistance, or any questions regarding your SwitchBot Smart Relay Switch 1, please contact SwitchBot customer service:
- Support en ligne: Visitez le SwitchBot Support Page
- E-mail: Refer to your product packaging or the SwitchBot website pour l'adresse e-mail de contact la plus récente.
Veuillez avoir à portée de main le numéro de modèle de votre produit (W5502300) et les détails de votre achat lorsque vous contactez l'assistance.