Manuel d'utilisation du clavier mécanique sans fil ATTACK SHARK X87

1. Introduction

This manual provides instructions for the ATTACK SHARK X87 Wireless Mechanical Keyboard. The X87 is an 87-key Tenkeyless (TKL) keyboard featuring a gasket-mount design with five layers of sound-absorbing material for an optimized typing experience. It offers versatile connectivity options including Bluetooth 5.0, 2.4GHz wireless, and USB-C wired modes, supporting up to five devices simultaneously. The keyboard is equipped with hot-swappable sockets compatible with 3-pin and 5-pin switches, and comes with pre-lubed Strawberry linear switches. It includes full RGB backlighting with multiple effects and music rhythm synchronization, durable PBT OEM profile keycaps, and an ergonomic design with two-stage tilt legs. Customization is available through dedicated driver software for key functions, macros, and lighting.

Image 1: ATTACK SHARK X87 Wireless Mechanical Keyboard (Cheese White variant).

Image 2: Gasket Structure with 5-Layer Sound-absorbing Cotton for enhanced typing feel and sound.

2. Installation

2.1 Contenu du paquet

Avant l'installation, assurez-vous que tous les éléments sont présents dans l'emballage :

• Clavier mécanique sans fil ATTACK SHARK X87
• Câble USB-C
• Extracteur de capuchon
• 2x interrupteurs de rechange
• Manuel de l'utilisateur (ce document)

2.2 Configuration physique

Place the keyboard on a stable surface. Adjust the keyboard's angle using the two-stage tilt legs located on the underside for ergonomic comfort.

Image 3: The keyboard features adjustable two-stage tilt legs for ergonomic positioning.

2.3 Modes de connexion

The ATTACK SHARK X87 supports three connection methods:

1. Mode sans fil 2.4 GHz :

   Locate the 2.4GHz USB dongle, typically stored in a compartment on the back of the keyboard. Plug the dongle into an available USB port on your computer or compatible device. Ensure the switch on the back of the keyboard is set to "2.4G". The keyboard should connect automatically.

2. Mode Bluetooth 5.0 :

   Set the switch on the back of the keyboard to "BT". On your device (PC, laptop, smartphone, tablet), enable Bluetooth and search for new devices. Select "ATTACK SHARK X87" from the list to pair. The keyboard can connect to up to five Bluetooth devices, switching between them using FN key combinations (refer to the Operating section).

3. Mode filaire USB-C :

   Connect the provided USB-C cable to the keyboard's USB-C port and the other end to an available USB port on your computer. Set the switch on the back of the keyboard to "USB". The keyboard will function as a wired device and charge simultaneously.

The keyboard is compatible with Windows and Mac operating systems, as well as gaming consoles, laptops, PCs, smartphones, and tablets.

Image 4 : Terminéview of the three available connection modes: 2.4GHz wireless, Bluetooth, and USB-C wired.

3. Mode d'emploi

3.1 Fonctions clés de base

The ATTACK SHARK X87 features a standard 87-key QWERTY layout. All keys function as labeled.

3.2 Contrôle du rétroéclairage RVB

The keyboard offers 15 stunning RGB lighting effects and 10 unique music rhythm lighting effects. Use the following FN key combinations to control the backlight:

• FR + ↑ (Flèche vers le haut) : Augmenter la luminosité du rétroéclairage
• FR + ↓ (Flèche vers le bas) : Diminuer la luminosité du rétroéclairage
• FR + ← (Left Arrow): Réduire la vitesse du rétroéclairage
• FR + → (Right Arrow): Augmenter la vitesse du rétroéclairage
• FN + Entrée : Switch Light Mode (cycle through effects)
• FN + ESC : Restore to Factory Settings (for lighting)
• FN + X : Toggle Light Switch (turn backlight on/off)

Image 5: FN key combinations for controlling RGB backlight brightness, speed, and modes.

3.3 Programmable Keys and Custom Software

The keyboard supports customization through its dedicated driver software. This software allows you to:

• Configurez les raccourcis clavier et les combinaisons de touches.
• Enregistrez et modifiez des macros.
• Customize backlighting effects and colors.

For driver downloads and detailed instructions on using the software, please refer to the official ATTACK SHARK website ou contacter le support client.

Image 6: The custom driver software allows for deep personalization of key functions, backlighting, and macros.

3.4 Vérification de l'état de la batterie

To check the current battery level of your keyboard, press FN + retour arrière. The indicator lights will show the approximate charge level. The keyboard features a 4000mAh battery with smart power-saving functions.

Image 7: Use FN + Backspace to check the 4000mAh battery status, indicated by specific keys.

4. Entretien

4.1 Nettoyage

To clean your keyboard, first disconnect it from all power sources. Use a soft, dry cloth to wipe the surface. For deeper cleaning, you may use the included keycap puller to remove keycaps and clean underneath with compressed air or a small brush. Avoid using harsh chemicals or abrasive materials.

4.2 Remplacement des touches et des interrupteurs

The ATTACK SHARK X87 features hot-swappable sockets, allowing for easy replacement of switches without soldering.

1. Retrait des touches : Use the provided keycap puller to gently grip the keycap and pull upwards.
2. Suppression des commutateurs : Use the switch puller (often integrated with the keycap puller) to carefully unclip the switch from the PCB and pull it out.
3. Installation des interrupteurs : Align the pins of the new 3-pin or 5-pin switch with the holes on the PCB. Gently press down until the switch clicks into place. Ensure pins are not bent.
4. Installation des touches : Placez le capuchon de touche sur la tige de l'interrupteur et appuyez fermement jusqu'à ce qu'il soit bien en place.

Image 8: The keyboard's hot-swappable design supports both 3-pin and 5-pin mechanical switches.

The keyboard comes with durable PBT keycaps with an OEM profile, resistant to wear and friction.

Image 9: PBT keycaps with OEM profile for durability and comfortable typing.

5. Dépannage

• Le clavier ne se connecte pas :
  • Ensure the mode switch (2.4G/BT/USB) on the back of the keyboard is set correctly.
  • Pour la fréquence 2.4 GHz, assurez-vous que le dongle est correctement branché.
  • Pour le Bluetooth, assurez-vous qu'il est activé sur votre appareil et que le clavier est jumelé. Essayez de le jumeler à nouveau.
  • For wired, ensure the USB-C cable is securely connected to both the keyboard and the device.
  • Check the keyboard's battery level (FN + Backspace) and charge if necessary.
• Rétroéclairage RGB défectueux ou incorrect :
  • Ensure the backlight is not turned off (FN + X).
  • Try resetting the lighting to factory settings (FN + ESC).
  • Régler la luminosité (FN + Flèche haut/bas).
  • Si vous utilisez un logiciel personnalisé, assurez-vous que les paramètres sont correctement appliqués.
• Keys not responding or responding poorly:
  • Check for debris under the keycaps. Clean the keyboard as described in the Maintenance section.
  • If a specific key is not working, the switch may be faulty. Replace the switch using the hot-swap feature.
  • Ensure the keyboard firmware is up to date (check the official webplacer).
• Problèmes logiciels :
  • Ensure you have downloaded the correct driver software for your keyboard model from the official ATTACK SHARK website.
  • Redémarrez votre ordinateur et votre clavier.
  • Réinstallez le logiciel pilote.

If you encounter persistent issues, please contact ATTACK SHARK customer support for assistance.

6. Spécifications

7. Informations sur la garantie

Specific warranty details for the ATTACK SHARK X87 Wireless Mechanical Keyboard are not provided in this manual. Please refer to the product packaging, the official ATTACK SHARK webConsultez le site ou contactez votre revendeur pour obtenir des informations complètes sur la garantie.

8. Assistance clientèle

For any questions regarding your ATTACK SHARK X87 keyboard, driver downloads, or technical assistance, please contact ATTACK SHARK customer support. You can typically find contact information on the official ATTACK SHARK website ou via votre plateforme d'achat.

Note: If any questions about the Keyboard and Driver Downloads, please feel free contact us in a timely manner, and we will reply as soon as possible within 24 hours to help you solve the problem.