Seauto Cordless Robotic Pool Cleaner SEAUTO-UFO Instruction Manual

1. Introduction

Thank you for choosing the Seauto Cordless Robotic Pool Cleaner, Model SEAUTO-UFO. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before initial use and retain it for future reference.

2. Consignes de sécurité

WARNING: Read all safety warnings and instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Assurez-vous que le port de charge est sec avant de brancher le chargeur.
• N’utilisez pas l’appareil de nettoyage si le cordon d’alimentation ou le chargeur est endommagé.
• Keep children and pets away from the pool area when the cleaner is in operation or charging.
• Only use the original charger provided by the manufacturer.
• Do not use the cleaner to remove large debris such as leaves, branches, or rocks, as this may damage the unit. Manually remove large debris before operating the cleaner.
• Retirez le nettoyeur de la piscine après chaque cycle de nettoyage et avant de le recharger.
• Rangez le produit nettoyant dans un endroit frais et sec, à l'abri de la lumière directe du soleil lorsqu'il n'est pas utilisé.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• 1 x Seauto G900 Pool Cleaner (Model SEAUTO-UFO)
• 1 x Crochet de récupération
• 1 x adaptateur secteur
• 1 x Manuel d'utilisation (ce document)
• 1 x filtre

Image: Contents of the Seauto Cordless Robotic Pool Cleaner package.

4. Produit terminéview

The Seauto Cordless Robotic Pool Cleaner is designed for efficient and autonomous cleaning of various pool types. Its key features include:

• Conception sans fil: Eliminates the need for hoses and tangled cords, offering hands-free operation.
• Robust Battery Life: Offre jusqu'à 60 minutes d'autonomie de nettoyage sur une seule charge.
• Forte aspiration : Equipped with 6000Pa suction power to effectively remove debris.
• Stationnement automatique : Returns to the pool edge when the battery is low for easy retrieval.

Image: The cordless design of the Seauto pool cleaner in operation.

Image: Battery specifications including capacity, running time, and charging duration.

Image: Depiction of the cleaner's powerful suction capability.

Image: The automatic parking feature of the pool cleaner.

5. Installation

5.1 Charge initiale

1. Assurez-vous que l'appareil de nettoyage soit complètement sec avant de le recharger.
2. Connect the power adapter to the charging port located on the underside of the cleaner.
3. Branchez l'adaptateur secteur sur une prise électrique standard.
4. Allow approximately 2.3 hours for a full charge. The indicator light will change to confirm charging status.

5.2 Placing in the Pool

1. Once fully charged, ensure the charging port cover is securely closed.
2. Plongez délicatement le nettoyeur dans la piscine. Il coulera au fond.
3. Assurez-vous que le nettoyeur soit complètement immergé avant de le mettre en marche.

6. Mode d'emploi

6.1 Démarrage de l'opération

• After placing the cleaner in the pool, press the power button (usually located on the top or side) to start the cleaning cycle.
• The cleaner will begin to move across the pool floor, collecting debris.

6.2 Cycle de nettoyage

• The cleaner operates for approximately 60 minutes on a full charge.
• It is designed to clean pool areas up to 645 sq. ft. (60 m²) and pools with a diameter of up to 28.67 ft (8.74 m).
• The cleaner is suitable for flat-bottom pools with a slope of 10° or less, and compatible with various pool shapes, including above-ground and indoor swimming pools.

Image: Maximum cleaning area specifications.

Image: Supported and unsupported pool types for the cleaner.

6.3 Automatic Parking and Retrieval

• When the battery level is low, the cleaner will automatically move to the nearest pool edge.
• Use the provided retrieval hook to carefully lift the cleaner out of the water.
• Always remove the cleaner from the pool after each use to prevent damage and prolong battery life.

7. Entretien

7.1 Nettoyage du filtre

Regularly clean the filter to maintain optimal suction performance.

1. After removing the cleaner from the pool, open the filter compartment.
2. Retirez le panier-filtre.
3. Rinse the filter thoroughly with a garden hose to remove all collected debris.
4. Ensure the filter is clean and dry before reinserting it into the cleaner.
5. Fermez bien le compartiment du filtre.

Image: Cleaning the filter with a hose.

7.2 Stockage

• After cleaning, ensure the cleaner is completely dry before storing.
• Conservez le produit nettoyant dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• For long-term storage, it is recommended to charge the battery to approximately 50% every three months to maintain battery health.

8. Dépannage

9. Spécifications

10. Garantie et assistance

10.1 Garantie limitée

The Seauto Cordless Robotic Pool Cleaner comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. This warranty typically covers manufacturing defects under normal use.

10.2 Assistance clientèle

For technical assistance, warranty claims, or any questions regarding your Seauto pool cleaner, please contact Seauto customer support through the retailer where the product was purchased or visit the official Seauto website pour les coordonnées.