1. Introduction
The Voominhtec 200W Portable Solar Panel is designed to provide reliable and efficient power for various outdoor activities, including camping, RV travel, and emergency power outages. Featuring high-efficiency monocrystalline silicon cells and a durable ETFE coating, this foldable solar panel offers excellent performance even in challenging conditions. Its portable and waterproof design ensures convenience and longevity.
2. Contenu du colis
Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- 1 x Voominhtec 200W Portable Solar Panel
- 1 x 10ft 4-in-1 Solar Cable (MC4 to DC5525, DC7909, Anderson, XT60)
- 1 x Manuel d'utilisation
- 4 x mousquetons

Image: The Voominhtec 200W Portable Solar Panel shown with its carrying bag, the 4-in-1 solar cable, and four carabiners, illustrating the complete package contents.
3. Instructions de configuration
- Dépliez le panneau solaire : Dépliez soigneusement les sections du panneau solaire jusqu'à ce qu'il soit complètement déployé.
- Position with Kickstands: Utilize the three adjustable kickstands on the back of the panel to prop it up. Adjust the angle to maximize exposure to direct sunlight. Optimal angles typically range from 45 to 65 degrees relative to the sun.
- Connect to Power Station/Battery:
- Identify the appropriate connector on the 4-in-1 solar cable (DC5525, DC7909, Anderson, or XT60) that matches your power station or battery input port.
- Connect the MC4 connectors from the solar panel to the MC4 end of the 4-in-1 cable.
- Plug the chosen adapter end of the 4-in-1 cable into your power station or battery.
- For charging 12V batteries (e.g., RV/car/boat batteries, Lifepo4, lithium, AGM, lead-acid, GEL), a solar charge controller and alligator clips (not included) are required. Connect the panel to the controller, and the controller to the battery.

Image: The solar panel is shown propped up by its adjustable kickstands, demonstrating how to set it at an optimal angle for maximum power output.

Image: A detailed diagram illustrating the MC4 connector setup and the various 4-in-1 adapter plugs (Anderson, DC5525, DC7909, XT60) for wide compatibility with different portable power stations.
4. Fonctionnement
Once properly set up and connected, the solar panel will begin converting sunlight into electrical energy. The built-in smart IC chip intelligently identifies your connected devices and optimizes charging speed while providing protection against overcharge, overcurrent, short circuit, over temperature, and overload.
- Efficacité de conversion élevée : The monocrystalline silicon cells with ETFE coating achieve a conversion rate of up to 24%.
- Puissance de sortie fiable : In full sunlight at optimal angles, the panel can deliver 160-200W. On overcast days, it can still provide 130-140W.
- Large compatibilité : The included 4-in-1 MC4 connectors (DC5525, DC7909, Anderson, XT60) make it compatible with most major solar generators and power stations on the market, including Jackery, Ecoflow, Anker, Rockpals, and Bluetti.
Remarque importante :
Some portable power stations have a maximum input power limit. The actual energy intake by your power station may not exceed its specified maximum input, even when using this 200W solar panel under ideal sunlight conditions. This does not indicate an issue with the solar panel's power output. Always confirm the specifications of your power station, especially any maximum input power restrictions, before use.

Image: An illustration showing the solar panel's high conversion efficiency of up to 24%, with metrics for open-circuit voltage, output power, and cell efficiency.
5. Entretien
Un entretien adéquat garantit la longévité et les performances optimales de votre panneau solaire.
- Nettoyage: Essuyez régulièrement la surface du panneau solaire avec un chiffon doux et sec.amp cloth to remove dust, dirt, or debris. Avoid using abrasive materials or harsh chemicals that could scratch the ETFE coating.
- Stockage: When not in use, fold the solar panel and store it in a dry, cool place away from direct sunlight and extreme temperatures. The magnetic handle facilitates easy carrying and storage.
- Résistance à l'eau : The panel itself is IP68 waterproof and dustproof, designed to withstand light rain and snow. However, the output control box is pas étanche. To prolong the lifespan of the solar panel, do not submerge the control box in water.

Image : Une coupe transversale view detailing the durable ETFE coating layers, highlighting its benefits such as being lighter than glass, 95% light transmittance, UV-resistance, and longer lifespan.

Image: A visual representation of the solar panel's IP68 rating, showing it resisting both dust and water splashes, emphasizing its enhanced durability for outdoor use.
6. Dépannage
Si vous rencontrez des problèmes avec votre panneau solaire, tenez compte des étapes de dépannage courantes suivantes :
- Aucune puissance de sortie :
- Assurez-vous que le panneau soit exposé directement au soleil et non à l'ombre d'arbres, de bâtiments ou d'autres objets.
- Check all cable connections to ensure they are secure and correctly plugged in.
- Verify that your power station or battery is turned on and configured to accept solar input.
- Faible puissance de sortie :
- Adjust the panel's angle to face the sun directly. The optimal angle changes throughout the day.
- Nettoyez la surface du panneau pour éliminer toute saleté ou poussière susceptible d'obstruer la lumière du soleil.
- Consider the weather conditions; cloudy or overcast days will naturally result in lower output.
- Confirm the maximum input wattage of your power station. If it's less than 200W, the panel's output will be limited by the power station's capacity.
- Connecteur incompatible :
- Ensure you are using the correct adapter from the 4-in-1 cable for your specific power station.
- If your device requires a different connector type, a separate adapter may be needed (not included).
Si les problèmes persistent après avoir suivi ces étapes, veuillez contacter le service client pour obtenir de l'aide supplémentaire.
7. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | voominhtec |
| Numéro de modèle | SPL01-200W |
| Puissance maximale | 200 watts |
| Efficacité | 24% |
| Dimensions du produit (déplié) | 70.84"L x 24.96"l x 0.98"H |
| Taille pliée | 25.2"L x 25"l x 1.57"H |
| Poids de l'article | 13.9 livres (6.3 kg) |
| Matériel | Plastic (ETFE coating) |
| Indice d'étanchéité | IP68 (panel only, control box not waterproof) |
| Type de connecteur | MC4, Anderson, DC5525, DC7909, XT60 |
| Vol maximumtage | 23.97 volts |
| Volume de sortietage | 20.3 volts |

Image: A diagram illustrating the compact folded dimensions (25.2 x 25 x 1.57 inches) and the extended unfolded dimensions (70.87 x 24.96 x 0.98 inches) of the lightweight 13.9 lbs solar panel.
8. Garantie et assistance
Voominhtec provides a Garantie de 12 mois pour ce produit, ainsi qu'un Garantie de remboursement de 30 jours. For any inquiries, technical assistance, or warranty claims, please contact our customer service team, available 7 days a week, 24 hours a day.
For more information and support, please visit the official Voominhtec store on Amazon: Voominhtec Amazon Store