Interrupteur intelligent Wi-Fi TONGOU 1P+N pour rail DIN, 6 A, avec surveillance de la consommation électrique - Manuel d'utilisation

1. Introduction

This manual provides essential instructions for the installation, setup, and operation of your TONGOU Wi-Fi Smart Switch 1P+N DIN Rail DIY with Power Monitoring. This device allows you to transform traditional household appliances into smart, connected devices, offering remote control, voice control, and energy consumption monitoring through the Smart Life or Tuya application.

Image 1.1: TONGOU Wi-Fi Smart Switch integrated into a smart home system, showing app control and Wi-Fi connectivity.

2. Consignes de sécurité

WARNING: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or property damage.

• Coupez toujours l'alimentation au niveau du disjoncteur principal avant toute installation ou opération de maintenance.
• Veillez à installer l'appareil dans un environnement sec, à l'abri de l'humidité et des températures extrêmes.
• Vérifiez que le voltage and current ratings of the switch match your electrical system requirements.
• Do not exceed the maximum current rating of 6A for this model.
• Assurez-vous que toutes les connexions de câblage sont sécurisées et correctement isolées.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• 1 x TONGOU Wi-Fi Smart Switch (Model: With Power Monitoring 6A)
• 1 x Manuel d'utilisation

4. Spécifications

5. Installation

The TONGOU Wi-Fi Smart Switch is designed for DIN rail mounting. Follow these steps for proper installation:

1. Coupure de courant : Avant d'entreprendre tout travail électrique, assurez-vous que l'alimentation principale du circuit est coupée au niveau du disjoncteur.
2. Montage: Mount the smart switch onto a standard 35mm DIN rail. The device occupies one position (18mm width).
3. Câblage : Connect the power input (N for Neutral, L for Live) to the top terminals labeled 'Power'. Connect the load output (N for Neutral, L for Live) to the bottom terminals labeled 'Load'. The maximum wiring capacity is 10 mm² for both power and load sides. Ensure correct polarity.
4. Protection du circuit: It is recommended to install an upstream residual current circuit breaker (RCBO/A type, 30mA/10kA) to protect the circuit.
5. Connexions sécurisées : Use a screwdriver to securely tighten all wire connections.

Image 5.1: Wiring diagram illustrating the connection of the TONGOU Wi-Fi Smart Switch to a circuit with an upstream circuit breaker and a light bulb as a load.

Image 5.2: Close-up of the smart switch showing its dimensions (82mm height, 35mm depth, 18mm width) and indicating a 10 mm² wiring section capacity.

6. Installation

To enable smart functionalities, connect your TONGOU Wi-Fi Smart Switch to the Smart Life or Tuya application.

1. Téléchargez l'application : Download the "Smart Life" or "Tuya Smart" application from the App Store (iOS) or Google Play Store (Android).
2. S'inscrire/Se connecter : Ouvrez l'application et créez un nouveau compte ou connectez-vous avec un compte existant.
3. Entrez en mode de couplage : After restoring power to the switch, press and hold the main button on the device for 5 to 10 seconds until the signal light blinks rapidly in blue. This indicates the device is in pairing mode.
4. Ajouter un appareil dans l'application : In the Smart Life/Tuya app, tap the "+" icon (usually in the top right corner) to add a new device. The app should automatically discover the switch. If not, manually select "Electrical" > "Circuit Breaker (Wi-Fi)" or similar.
5. Se connecter au Wi-Fi : Follow the in-app instructions to connect the device to your 2.4 GHz Wi-Fi network. Note: The device only supports 2.4 GHz Wi-Fi; 5 GHz networks are not compatible.
6. Renommer l'appareil : Une fois connecté, vous pouvez renommer l'appareil pour une identification plus facile (par exemple, « Lampe du salon »).

Image 6.1: Visual guide showing how to press and hold the button for 5-10 seconds until the blue indicator light blinks rapidly, signifying pairing mode.

Image 6.2: Screenshot of the Smart Life/Tuya app showing the login/register screen, a Wi-Fi router, and the process of adding a discovered "WiFi Din Rail Switch" device.

7. Fonctionnement

Once the smart switch is successfully paired, you can control it and monitor energy usage through the app or voice commands.

7.1. Contrôle à distance via l'application

Open the Smart Life or Tuya app. Select your TONGOU Smart Switch from the device list. You can:

• Turn the connected appliance On or Off remotely from anywhere.
• Set up various timer modes:
• Mode de chronométrage : Schedule specific on/off times for daily or weekly routines.
• Mode compte à rebours : Programmez un compte à rebours pour que l'appareil s'éteigne après une durée spécifiée.
• Cyclic Timing Mode: Configure repetitive on/off cycles.
• Astronomical Timing Mode: Automate based on sunrise and sunset times.

7.2. Commande vocale

The TONGOU Smart Switch is compatible with Amazon Alexa and Google Assistant. To enable voice control:

1. Link your Smart Life/Tuya account to Amazon Alexa or Google Home app.
2. Découvrez de nouveaux appareils.
3. Utilisez des commandes vocales telles que :
• "Alexa, allume [Nom de l'appareil]"
• "Hey Google, éteins [Nom de l'appareil]"

Image 7.1: An Amazon Echo device displaying a voice waveform, indicating it is processing a command to turn off a lamp.

7.3. Surveillance de l'alimentation électrique

The smart switch provides real-time and historical energy consumption data:

• View courant en temps réel, voltage, and power consumption of the connected load.
• Access historical data (hourly, daily, monthly, yearly) to track energy usage patterns.

Image 7.2: A graphical representation within the app showing total electricity consumption (5.00 kWh) and a bar chart illustrating hourly consumption data for a specific date.

8. Entretien

To ensure optimal performance and longevity of your TONGOU Wi-Fi Smart Switch:

• Veillez à ce que l'appareil reste propre et exempt de poussière. Utilisez un chiffon doux et sec pour le nettoyer.
• N’utilisez pas de nettoyants liquides ni de solvants.
• Assurez une ventilation adéquate autour de l'appareil pour éviter toute surchauffe.
• Vérifiez régulièrement le serrage des connexions électriques, surtout après l'installation initiale.

9. Dépannage

If you encounter issues with your TONGOU Wi-Fi Smart Switch, refer to the following common problems and solutions:

10. Garantie et assistance

For warranty information and technical support, please refer to the documentation provided with your purchase or contact TONGOU customer service through their official channels. Keep your purchase receipt as proof of purchase.