Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, Model 562041. This device is designed for enterprise networks requiring efficient and scalable routing solutions with high-powered Power over Ethernet (PoE) capabilities.

2. Consignes de sécurité

Observe the following safety precautions to prevent damage to the device and injury to personnel:

Assurez-vous d'une mise à la terre appropriée de l'appareil.
Do not expose the switch to water or excessive humidity.
Utilisez l'appareil dans les plages de température et d'humidité spécifiées.
Use only the power cable provided or a compatible replacement.
Do not open the switch casing; confier l'entretien à un personnel qualifié.
Assurez une ventilation adéquate autour de l'interrupteur pour éviter toute surchauffe.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

Intellinet 48-Port L3 Managed Gigabit PoE+ Switch (Model 562041)
Câble d'alimentation
19" rackmount brackets
Pieds en caoutchouc
Instructions (ce manuel)

4. Produit terminéview

The Intellinet 562041 is a robust Layer 3 managed switch featuring 48 Gigabit PoE+ ports and six 10G SFP+ uplink slots. It supports a total power budget of 850 watts for PoE devices.

4.1 Panneau avant

**Figure 4.1 :** Devant view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the 48 Gigabit Ethernet ports, six SFP+ slots, and LED indicators on the front panel.

Le panneau avant comprend :

48 x 10/100/1000 Mbps RJ45 Ports: These ports support Power over Ethernet Plus (PoE+) for connecting compatible devices.
6 x 10 Gigabit SFP+ Slots: For high-speed uplink connections to other network devices.
Indicateurs LED : Provide status information for power, system, link activity, and PoE status.
Port de console : For local management and configuration.

Close-up of SFP+ and Console ports on the Intellinet switch — **Figure 4.2 :** Gros plan view of the SFP+ uplink ports and the console port on the right side of the switch's front panel. The SYS and PWR LEDs are also visible.

Close-up of LED indicators on the Intellinet switch — **Figure 4.3 :** Gros plan view of the LED indicators (LED MODE, LINK, PoE) located on the left side of the switch's front panel, above the RJ45 ports.

4.2 Panneau arrière

**Figure 4.4 :** Arrière view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch. This image shows the power input and cooling fans.

The rear panel typically includes the AC power input and cooling fans for heat dissipation.

Arrière view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch with warning label — **Figure 4.5 :** Arrière view of the Intellinet 48-Port L3 Managed Gigabit PoE+ Switch, highlighting the power input, cooling fans, and a warning label regarding proper grounding.

5. Installation

5.1 Installation physique

The switch can be installed in a standard 19-inch equipment rack or placed on a desktop.

Installation en rack : Attach the provided rackmount brackets to the sides of the switch using the included screws. Secure the switch into a standard 19-inch rack.
Installation de bureau : Attach the provided rubber feet to the bottom of the switch to prevent scratching and ensure stability. Place the switch on a flat, stable surface.

5.2 Connexion d'alimentation

Connect the provided power cable to the AC power input on the rear panel of the switch and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting the power cable.

5.3 Connexions réseau

Périphériques PoE : Connect PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points) to any of the 48 Gigabit RJ45 ports. The switch will automatically detect and provide power to these devices.
Connexions de liaison montante : Insert compatible SFP+ transceivers into the 10 Gigabit SFP+ slots and connect them to your core network or other high-speed devices using appropriate fiber optic cables.
Connexion de la console : For initial configuration or direct management, connect a console cable from your computer to the console port on the switch.

5.4 Configuration initiale

Refer to the separate software configuration guide for detailed instructions on accessing the switch's management interface (web-based GUI or command-line interface via console port) and performing initial setup, including IP address assignment, user accounts, and basic network settings.

6. Mode d'emploi

6.1 Layer 3 Routing

This switch offers dynamic Layer 3 IP routing capabilities, including OSPF (Open Shortest Path First), RIP (Routing Information Protocol), and VRRP (Virtual Router Redundancy Protocol). These protocols enable efficient and scalable routing within complex network environments.

Diagram illustrating Layer 3 features like OSPF, RIP, VRRP, 6x10G SFP+, and 850W PoE — **Figure 6.1 :** Surview of the switch's Layer 3 capabilities, including OSPF, RIP, VRRP, 6x10G SFP+ uplinks, and an 850W PoE budget.

6.2 Alimentation par Ethernet (PoE+)

The switch provides up to 30 watts of power per port across its 48 PoE+ ports, with a total power budget of 850 watts. This allows for seamless integration of various PoE devices without the need for separate power adapters.

Diagram showing power consumption examples for various PoE devices — **Figure 6.2 :** Examples of power consumption for various PoE devices, categorized by 802.3af (15W), 802.3at (30W), and 802.3bt (60W, 90W) standards.

6.3 PoE Scheduling

The switch supports PoE scheduling, allowing administrators to define specific times for powering on, powering off, or rebooting connected PoE devices. This feature can optimize power consumption and enhance network security.

Diagram illustrating PoE scheduling for various devices — **Figure 6.3 :** Illustration of PoE scheduling, showing how power can be scheduled to turn off, reboot, or turn on for different devices on specific days and times.

PoE scheduling timeline example — **Figure 6.4 :** A timeline example demonstrating how PoE scheduling can save power by turning off devices during non-business hours.

6.4 Self-Healing Functionality (PDM)

The Powered Device Monitor (PDM) feature enables the switch to proactively monitor the status of connected PoE devices. If a device becomes unresponsive, the PDM can automatically restart the PoE port to restore functionality, minimizing downtime and maintaining network integrity.

6.5 Gestion du Cloud

The switch supports cloud management capabilities, allowing for remote configuration, monitoring, and troubleshooting of the device from a centralized platform. Refer to the cloud management documentation for setup and usage details.

7. Entretien

7.1 mises à jour du micrologiciel

Regularly check the Intellinet Network Solutions website for the latest firmware updates. Applying firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

7.2 Nettoyage

To clean the switch, power it off and disconnect all cables. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.

7.3 Considérations environnementales

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in direct sunlight, near heat sources, or in areas with high dust accumulation.

8. Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer avec le commutateur.

8.1 Pas d'alimentation

Verify the power cable is securely connected to both the switch and a working electrical outlet.
Assurez-vous que l'interrupteur d'alimentation situé sur le panneau arrière est en position ON.
Vérifiez le bon fonctionnement de la prise électrique avec un autre appareil.

8.2 Aucun lien sur un port

Vérifiez la connexion du câble Ethernet aux deux extrémités. Assurez-vous qu'il est bien branché.
Vérifiez que le câble n'est pas endommagé. Essayez un autre câble.
Vérifiez que l'appareil connecté est allumé et fonctionne correctement.
Check the port status in the switch's management interface.

8.3 Appareil PoE ne recevant pas d'alimentation

Confirm the connected device is a PoE-compatible device.
Vérifiez le voyant d'état PoE du port concerné.
Vérifiez que le budget de puissance PoE total (850 W) n'est pas dépassé par tous les appareils connectés.
Utilize the Powered Device Monitor (PDM) feature to automatically restart the port if the device is unresponsive.
Check PoE settings in the switch's management interface.

9. Spécifications

Fonctionnalité	Spécification
Numéro de modèle	562041
Marque	SOLUTIONS RÉSEAU INTELLINET
Nombre de ports	54 (48 x Gigabit PoE+, 6 x 10G SFP+)
Type d'interface	PoE, SFP
Puissance maximale (budget PoE)	850 watts
Taux de transfert de données	10 Gigabits Per Second (SFP+ uplinks)
Poids de l'article	6.2 kilogrammes (13.64 livres)
Dimensions du produit (L x l x H)	13.78 x 17.32 x 1.73 pouces
Indice de température supérieur	104 degrés Fahrenheit (40°C)
Indice de température inférieur	32 degrés Fahrenheit (0°C)
Appareils compatibles	Desktop, Router, PoE devices (IP cameras, VoIP phones, WAPs)
Composants inclus	19" rackmount brackets, Instructions, Rubber feet, power cable
Code UPC	766623562041

10. Garantie et assistance

10.1 Informations sur la garantie

This Intellinet Network Solutions product is covered by a Garantie constructeur de 3 ansVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie. La garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation.

10.2 Assistance technique

For technical assistance, product documentation, or to register your product, please visit the official Intellinet Network Solutions website or contact their customer support. Contact information can typically be found on the manufacturer's website ou dans l'emballage du produit.

INTELLINET NETWORK SOLUTIONS 562041