Manuel d'utilisation de la télécommande CHIGEE CGRC CAN 8 broches

Introduction

The CHIGEE CGRC Remote Control CAN 8 PIN is designed to enhance the safe and efficient operation of CHIGEE AIO-5 lite or AIO-5 Play units on motorcycles equipped with a wheel controller. This device allows users to control their AIO-5 unit without needing to remove their hands from the handlebars, promoting safer riding.

Image: The CHIGEE CGRC Remote Control CAN 8 PIN module, a compact black device with the CHIGEE logo and model information.

Compatibilité

This CGRC CAN module is compatible with various BMW motorcycle models equipped with a wheel controller. It integrates seamlessly to provide control over your CHIGEE AIO-5 series device.

Modèles pris en charge:

• C400 X / C400 GT
• F750 / F850
• F900 XR
• S1000 XR / S1000 R
• R1200 RT / R1250 RT
• K1600 B / K1600GA
• K1600 GT / K1600 GTL
• Other BMW motorcycle models equipped with a wheel controller and adhering to 4-pin or 8-pin compatibility specifications.

Remarques importantes concernant la compatibilité :

The following models are currently non pris en charge due to control integration conflicts or incompatible pin ports:

• 2022 K1600 : Installation may result in a control integration conflict with the TFT display. Wireless remote control option is recommended instead.
• 2023 R 1250 RT : Installation may result in a control integration conflict with the TFT display. Wireless remote control option is recommended instead.
• R1300 GS : Not compatible as the applicable pin port is not 4/8-pin. A dedicated CGRC-CAN solution for the R 1300 GS is under development, expected around June-July 2024.

Please stay informed through official CHIGEE channels for updates on new model compatibility.

Image: Diagram showing the installation location of the CGRC CAN 8-pin module on a C400 X / C400 GT motorcycle.

Image: Diagram showing the installation location of the CGRC CAN 8-pin module on an F750 / F850 motorcycle.

Image: Diagram showing the installation location of the CGRC CAN 8-pin module on an F900 XR motorcycle.

Configuration et installation

The CGRC CAN module is designed for non-destructive installation, integrating directly into your motorcycle's existing wiring system. Ensure the motorcycle is turned off before beginning installation.

1. Locate the compatible 8-pin port on your motorcycle. Refer to the compatibility diagrams in the previous section for common locations (e.g., near the handlebars, under the seat, or within the fairing).
2. Carefully connect the CGRC CAN module's cable to the motorcycle's 8-pin port. Ensure a secure and firm connection.
3. Route the cable safely, away from moving parts or heat sources, and secure it using cable ties if necessary.
4. Once connected, turn on your motorcycle and the CHIGEE AIO-5 unit to verify functionality.

Image: The CGRC CAN module installed within a motorcycle's wiring compartment, demonstrating its compact size and ease of integration.

Mode d'emploi

The CGRC CAN module allows you to control your CHIGEE AIO-5 unit using your motorcycle's existing wheel controller. The functions are categorized by the mode of operation on the AIO-5 unit.

Image: A close-up of a motorcycle's handlebar controls, highlighting the wheel dial (1) and a button (2) used for controlling the AIO-5 unit.

Présentation de la fonction :

• Mode lien :
  • ① Left and right short-dial: Selection applications.
  • ② Short press: Confirmer.
  • Appui long : Retour au niveau précédent.
• Mode Bluetooth:
  • ① Left and Right Short Pluck: Cut Song (Skip track).
  • ② Play/Pause: Contrôler la lecture multimédia.
• Mode vidéo :
  • ① Left dial: Changer de caméra.
  • Cadran droit : Lock video.
  • ② Short press: Prendre une photo.
• Any State (General Controls):
  • ① Long-dial: Switching applications.
  • ② Long press: Retour.

Note: The projection control supports CarPlay, Android Auto, and Bluetooth modes.

Caractéristiques

Image: Technical diagram illustrating the dimensions of the CGRC CAN module (51mm length, 27.8mm width, 14.5mm thickness) and its 220mm connecting cables.

Entretien

The CGRC CAN module is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the module and its connections clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
• Periodically check the cable connections to ensure they remain secure and undamaged.
• Avoid exposing the module to extreme temperatures or harsh chemicals.
• If the module becomes wet, ensure it is completely dry before re-establishing power.

Dépannage

If you encounter issues with your CGRC Remote Control CAN 8 PIN, refer to the following common troubleshooting steps:

• No Response from AIO-5 Unit:
  • Verify that the CGRC CAN module is securely connected to the motorcycle's 8-pin port.
  • Ensure the motorcycle's ignition is on and the AIO-5 unit is powered.
  • Check if your motorcycle model is listed as compatible. Refer to the "Compatibility" section.
• Contrôle intermittent :
  • Inspect the cable for any signs of damage or loose connections.
  • Ensure there are no obstructions or interference near the module or the motorcycle's wheel controller.
• Fonction spécifique ne fonctionnant pas :
  • Confirm you are in the correct mode (Link, Bluetooth, Video) on your AIO-5 unit for the desired function.
  • Refer to the "Operating Instructions" section for the correct button presses and dial movements for each function.

If issues persist after following these steps, please contact CHIGEE customer support for further assistance.

Garantie et assistance

For warranty information, product registration, or technical support, please visit the official CHIGEE webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

Vous trouverez plus d'informations et les coordonnées sur le CHIGEE Amazon Store ou leur représentant website.