Introduction
This manual provides essential information for the safe and efficient operation of your OMTech 50W Fiber Laser Engraver. Please read thoroughly before use.
Consignes de sécurité
- Always wear protective eyewear (safety goggles included) when operating the laser engraver.
- Ensure proper ventilation to avoid inhaling fumes during engraving.
- Familiarisez-vous avec l'emplacement et le fonctionnement du bouton d'arrêt d'urgence.
- Do not operate the machine rapidly or out of sequence; allow a 3-second interval between operations.
- This is a Class 2 laser product (0.874 mW output power).
Guide d'installation
Déballage et assemblage initial
Carefully unpack all components from the shipping crate. Ensure all parts listed in the packing list are present.
Description de la vidéo : This video demonstrates the step-by-step installation process for the OMTech fiber laser engraver, including attaching the laser arm and connecting components.
Description de la vidéo : A detailed guide on setting up your OMTech laser engraver, covering initial assembly and connections.
Identification des composants
Description de l'image : Un visuel surview of the main components of the OMTech 50W Fiber Laser Engraver, including the main unit, laser arm, and control panel.
Connexion de l'alimentation et de l'USB
Connect the power cable to a standard 110V power supply. Connect the machine to your computer via the provided USB cable.
Description de la vidéo : This video provides a comprehensive setup guide for the compact fiber marker, detailing how to connect the power, USB, and other essential components.
Software Installation (EzCad2)
Install the EzCad2 software from the provided USB drive. Ensure drivers are correctly installed via Device Manager.
Description de l'image : An image showing the EzCad2 software interface on a laptop, which is used to control the OMTech 50W Fiber Laser Engraver.
Mode d'emploi
Focalisation du laser
Use the red dot pointer for precise calibration and focusing. Adjust the laser arm height until the two red dots converge into one for optimal focus.
Description de l'image : This image illustrates the red dot guidance system, which helps in precisely focusing the laser on the material before engraving.
Processus de gravure
Import your design into EzCad2, set engraving parameters (speed, power, frequency), and preview the engraving area using the frame function. Wear safety goggles before initiating engraving.
Description de la vidéo : A short video demonstrating the OMTech fiber laser engraver in action, showing the laser marking a surface.
Description de la vidéo : This video shows the OMTech fiber laser engraver working with a rotary axis to engrave cylindrical objects.
Description de l'image : This image highlights the professional precision achieved by the OMTech engraver, showcasing fine details on an engraved design.
Rotary Axis Operation (Optional)
For engraving curved surfaces, connect a compatible rotary axis (not included) to the 4-pin port.
Description de l'image : An image depicting the OMTech fiber laser engraver set up to engrave on curved surfaces using an optional rotary axis.
Entretien
Regularly clean the lens and work area to ensure optimal performance. Refer to the user manual for detailed cleaning procedures and recommended maintenance schedules.
The laser source has an average service life of over 100,000 hours, requiring minimal maintenance for the laser unit itself.
Dépannage
Problèmes courants et solutions
- Le laser ne fonctionne pas : Check power connections, emergency stop button, and ensure the "Fiber Laser" button is pressed. Verify the "Scan Head" key is turned to the ON position.
- Mauvaise qualité de gravure : Re-check focal length using the red dot pointer. Ensure material is clean and flat on the workbed. Adjust engraving parameters (speed, power) in the software.
- Software not recognizing machine: Reinstall USB drivers from the provided USB drive. Check USB cable connection.
Caractéristiques
- Numéro de modèle : LYF-50W
- Puissance du laser : 50W Solid-State Fiber Laser
- Cours de laser : 2 (0.874 mW output power)
- Zone de travail: 7.9 x 7.9 pouces (200 x 200 mm)
- Vitesse de gravure : Jusqu'à 10,000 mm/s
- Précision de la gravure : 0.01 mm
- Per-Pass Depth: 0.1 mm
- Laser Source Life: Plus de 100,000 heures
- Compatibilité logicielle: EzCad2 (Windows), LightBurn compatible
- Dimensions du produit : 30.5 x 17.7 x 31.1 pouces
- Capacité du materiau: Jusqu'à 44.1 lb.
Garantie et assistance
This product includes a 30-day return policy for refund or replacement. For specific warranty details beyond this period, please contact OMTech Direct.
OMTech offers U.S.-based technical support and 24/7 online customer service. Our teams are available Monday to Friday, 8:30 AM to 4:30 PM PST.
Pour obtenir de l'aide, visitez le Boutique OMTech sur Amazon or contact support@omtechlaser.com.
Ressources supplémentaires
For further assistance and community engagement, consider joining official laser user groups on Facebook or checking instructional videos on the OMTech YouTube channel.
A QR code is provided on the machine for the latest version of the user manual and additional resources.
Description de l'image : A product image showing the OMTech 50W Fiber Laser Engraver, with a visible QR code that links to the latest user manual and support resources.