Kensington MY430 EQ Rechargeable Mouse User Manual

Introduction

The Kensington MY430 EQ Rechargeable Mouse is designed for professionals seeking productivity and convenience with a focus on sustainability. This multi-device mouse offers flexible connectivity options, programmable buttons, and an integrated rechargeable battery. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your MY430 EQ mouse.

Image: The Kensington MY430 EQ Rechargeable Mouse, a black wireless mouse with a sleek design.

Attributs de durabilité

The MY430 EQ mouse features an outer case composed of a minimum of 56% post-consumer recycled content (PCR), contributing to reduced environmental impact.

Image: A close-up of the MY430 EQ mouse highlighting its sustainability features, including a 'Certified Recycled Content' badge.

Installation

Qu'y a-t-il dans la boîte

• Souris rechargeable Kensington MY430 EQ
• Câble de chargement USB-C
• Récepteur USB 2.4 GHz

Chargement de la souris

Before initial use, fully charge your MY430 EQ mouse. Connect the included USB-C charging cable to the mouse's charging port and to a USB power source. The LED indicator on the mouse will show charging status. A full charge provides up to 4 months of battery life.

Image: The MY430 EQ mouse connected to its USB-C charging cable, illustrating the charging process and highlighting its long-lasting rechargeable battery.

Options de connectivité

The MY430 EQ mouse supports connection to up to three active devices: two via Bluetooth Low Energy (LE) and one via the 2.4GHz USB receiver. It is compatible with Windows, macOS, and ChromeOS.

Image: The MY430 EQ mouse demonstrating its multiple connectivity options, including Bluetooth, 2.4GHz USB receiver, and compatibility with Windows, macOS, and ChromeOS.

2.4GHz USB Receiver Connection

1. Locate the 2.4GHz USB receiver, typically stored within the mouse's battery compartment or a dedicated slot.
2. Branchez le récepteur USB dans un port USB disponible sur votre ordinateur.
3. Allumez la souris. Elle devrait se connecter automatiquement au récepteur.

Bluetooth Connection (Device 1 & Device 2)

1. Allumez la souris.
2. Press and hold the Bluetooth pairing button (refer to the mouse diagram for location) until the LED indicator flashes, indicating pairing mode.
3. Sur votre appareil (ordinateur, tablette), accédez aux paramètres Bluetooth et recherchez de nouveaux appareils.
4. Select "Kensington MY430 EQ" from the list of available devices to pair.
5. Repeat steps 2-4 to pair a second device via Bluetooth.

Utilisation de la souris

Fonctions de base

• Click gauche: Sélection et activation primaires.
• Clic-droit: Accède aux menus contextuels.
• Molette: Défile les documents et web pages. Peut également servir de bouton central.

Image: A hand demonstrating the natural grip and operation of the MY430 EQ mouse.

Réglage DPI

The MY430 EQ mouse offers multiple DPI (Dots Per Inch) settings to adjust cursor sensitivity: 1000, 1600, and 2400 DPI. Press the DPI button (located near the scroll wheel) to cycle through these settings. The LED indicator may briefly change color or flash to indicate the current DPI level.

Boutons programmables

The MY430 EQ features 5 programmable buttons (Left, Right, Forward, Back, Scroll/Middle Click, and DPI Buttons). To customize these buttons for enhanced productivity, download and install the free KensingtonWorks™ software from the official Kensington website. The software allows you to assign various functions, macros, and shortcuts to each button.

Basculer entre les appareils

To switch between connected devices (2.4GHz USB receiver, Bluetooth Device 1, Bluetooth Device 2), use the device selection button on the mouse. Press the button to cycle through the connected channels. The corresponding LED indicator will illuminate to show the active connection.

Entretien

Nettoyer la souris

• Disconnect the mouse from all devices and turn it off before cleaning.
• Utilisez légèrement un chiffon doux et non pelucheux.ampterminer avec de l'eau ou un nettoyant doux et non abrasif.
• Évitez toute infiltration d'humidité. N'utilisez pas de produits chimiques agressifs ni de matériaux abrasifs.

Entretien de la batterie

• Pour optimiser la durée de vie de la batterie, évitez de décharger complètement la souris fréquemment.
• Rangez la souris dans un endroit frais et sec lorsqu'elle n'est pas utilisée pendant une période prolongée.
• Utilisez uniquement le câble USB-C fourni pour la charge.

Dépannage

Souris ne répondant pas

• Vérifier la batterie : Ensure the mouse is charged. Connect it to the USB-C cable and allow it to charge for a few minutes.
• Interrupteur: Vérifiez que la souris est allumée.
• Connectivité : Ensure the correct connection mode (2.4GHz or Bluetooth) is selected on the mouse and your device.
• Récepteur USB : If using 2.4GHz, try plugging the USB receiver into a different USB port on your computer.
• Jumelage Bluetooth: If using Bluetooth, re-pair the mouse with your device.

Cursor Erratic or Lagging

• Surface: Assurez-vous d'utiliser la souris sur une surface propre, non réfléchissante et uniforme.
• Ingérence: Move the mouse closer to the receiver or Bluetooth-enabled device. Avoid using it near other wireless devices that might cause interference.
• Paramètre PPP : Adjust the DPI setting to see if a different sensitivity improves performance.

KensingtonWorks Software Issues

• Réinstallation : Try uninstalling and reinstalling the KensingtonWorks software.
• Mises à jour : Check the Kensington website for the latest software version and firmware updates for your mouse.

Caractéristiques

Garantie

The Kensington MY430 EQ Rechargeable Mouse comes with a 3-year warranty. For warranty claims or detailed information regarding terms and conditions, please retain your proof of purchase and contact Kensington customer support.

Soutien

For additional support, FAQs, software downloads (KensingtonWorks™), or to contact technical assistance, please visit the official Kensington website:

www.kensington.com