1. Consignes de sécurité
Veuillez lire attentivement toutes les consignes de sécurité et les instructions avant d'utiliser ce produit. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie et/ou des blessures graves.
- Risque de température élevée : The soldering iron tip reaches very high temperatures (up to 450°C). Avoid direct contact with the tip to prevent burns. Allow the iron to cool completely before handling or storing.
- Inhalation de fumées : Le soudage produit des fumées. Travaillez toujours dans un endroit bien ventilé ou utilisez un extracteur de fumées pour éviter d'inhaler des fumées nocives.
- Sécurité électrique : Ensure the power supply used is compatible with the soldering iron's voltage et quoitage requirements (9-20V DC, 18-100W). Use only certified PD/QC power adapters. Do not use the soldering iron if the cable or plug is damaged.
- Induced Electricity: It is normal for fast charging heads to have induced electricity. If you are sensitive to induced electricity, it is recommended to use the soldering iron with a power bank.
- Utilisation appropriée : Use the soldering iron only for its intended purpose of soldering electronic components. Do not use it near flammable materials or liquids.
- Enfants et animaux domestiques : Keep the soldering iron out of reach of children and pets at all times.
2. Contenu du colis
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact ALIENTEK customer support.
Image: Standard package contents for the ALIENTEK T80 Smart Soldering Iron kit.
- ALIENTEK T80 Smart Soldering Iron Host
- Soldering Iron Tip (T80-xx series)
- Câble USB Type-C vers Type-C
- Support de fer à souder
- Manuel de l'utilisateur (ce document)
3. Produit terminéview
The ALIENTEK T80 Smart Soldering Iron is a portable, high-performance digital soldering tool designed for precision work. It features fast heating, an OLED display, and intelligent auto-sleep functionality.
Image : Terminéview of the ALIENTEK T80/T80P Smart Soldering Iron, emphasizing its key features.
3.1 Paramètres de base
Image: Detailed basic parameters and specifications of the T80/T80P Smart Soldering Iron.
| Paramètre | Description |
|---|---|
| Nom du produit | T80 / T80P Smart Soldering Iron |
| Alimentation électrique | Type C |
| Vol d'exploitationtage | 9 à 20 V CC |
| Protocole de charge rapide | PD2.0/3.0, QC2.0/3.0 |
| Plage de température | 80~450°C |
| Power (Adjustable) | 18~100W |
| Écran | 0.87' OLED (128*32 Pixel) |
3.2 Principales caractéristiques
- Type-C interface power supply, supports PD/QC fast charge protocol.
- OLED display for clear working status.
- Supports 9~20V working voltage gamme.
- Supports 18~100W heating power adjustable.
- Fast heating: 2 seconds to melt tin (T80 @ 100W).
- Fast return temperature, suitable for large solder joints.
- Temperature control precision and stability: ±2%.
- Intelligent induction for energy saving (auto-sleep).
- Small size, portable, ergonomic design.
3.3 Induced Dormancy (Auto Sleep)
The soldering iron features an intelligent induction design that automatically puts the device into hibernation mode when it is put down. This prolongs the life of the heating core and saves energy. Picking up the host will automatically wake it up.
Image: Illustration of the induced dormancy feature, showing the soldering iron entering sleep mode when put down.
3.4 T80 vs T80P Comparison
The T80 and T80P models share many features but differ in heating core type, size, resistance, weight, and tinning time.
Image: Comparison of T80 and T80P models, including tip insertion diagrams.
| Fonctionnalité | T80 | T80P |
|---|---|---|
| Type de noyau chauffant | T80-xx | T80P-xx |
| Heating Core Size | L80mm Ø3.5mm | L98mm Ø4.5mm |
| Valeur de résistance | 2.1 Ω | 2.5 Ω |
| Poids de la machine | 38.5g | 42.8g |
| Temps d'étamage | 2S (@100W) | 5S (@100W) |
4. Installation
Follow these steps to set up your ALIENTEK T80 Smart Soldering Iron for first use.
- Insérer la pointe de soudure : Carefully insert the desired soldering tip into the front end of the soldering iron handle. Ensure it is fully seated and secure.
- Connectez l'alimentation : Connect a compatible USB Type-C power supply (PD/QC protocol, 9-20V DC, 18-100W) to the Type-C port on the soldering iron. A 100W+ charger is recommended for optimal performance.
- Placer sur le stand : Always place the soldering iron on its included stand when not actively in use to prevent accidental burns or damage to surfaces.
5. Fonctionnement
5.1 Mise sous/hors tension
The soldering iron powers on automatically when connected to a compatible power supply. To power off, simply disconnect the power supply. The device will enter auto-sleep mode when idle.
5.2 Temperature Adjustment and Power Fine-Tuning
The T80/T80P supports adjustable heating power from 18W to 100W, with 6 predefined power gears. The current can be fine-tuned for precise power adjustment.
Image: Power adjustment gears and instructions for fine-tuning power settings.
To Fine-Tune Power:
- Press button A or B to select the adjustment item on the OLED screen.
- Long press button B to select, short press to adjust the value.
- Long press button A to exit the adjustment interface.
- Select 'OK' and press and hold button B to save your settings.
Note: The T80 may experience a temporary temperature jump when using a new heating core. The temperature will stabilize after several uses.
Écran OLED 5.3 pouces
The OLED screen provides real-time information about the soldering iron's status and allows access to various settings.
Image : Examples of information displayed on the OLED screen, including temperature, settings, and status.
L'écran peut afficher :
- Current Set Temperature and Actual Temperature
- Power Level (e.g., 100%)
- Voltage Information (Vol Info)
- Temperature Step (Temp Step) for fine adjustments
- Sleep Mode Indicator (Sleep)
- Standby Temperature (Stdb)
- Mode de mise à niveau
- Language Selection (e.g., English)
6. Entretien
Proper maintenance ensures the longevity and optimal performance of your soldering iron.
- Conseil de nettoyage : Nettoyez régulièrement la panne à souder à l'aide d'un produit nettoyant.amp sponge or brass wool to remove excess solder and oxidation. This helps maintain good heat transfer and extends tip life.
- Étamage des pointes : After cleaning and before storing, always tin the tip with a small amount of fresh solder. This prevents oxidation and corrosion.
- Refroidir: Always allow the soldering iron to cool down completely before storing it.
- Stockage: Store the soldering iron in a dry, safe place, away from dust and moisture.
- Nettoyage du corps : Essuyez le corps du fer à souder avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants.
7. Dépannage
If you encounter issues with your ALIENTEK T80 Smart Soldering Iron, refer to the following common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le fer à souder ne chauffe pas. | Incompatible or insufficient power supply; loose tip connection; faulty heating element. | Ensure power supply meets 9-20V DC and 18-100W (PD/QC). Check Type-C cable connection. Re-insert tip firmly. If problem persists, contact support. |
| Temperature is unstable or fluctuates. | Insufficient power supply; new heating core (initial use); poor tip contact. | Utilisez une puissance plus élevéetage power supply (e.g., 100W). Allow for several uses for new tips to stabilize. Ensure tip is fully seated. |
| OLED screen is blank or not displaying correctly. | No power; device in sleep mode; internal error. | Check power connection. Pick up the iron to wake from sleep. Disconnect and reconnect power. If issue persists, contact support. |
| Soldering tip does not melt solder effectively. | Tip is oxidized or dirty; incorrect temperature setting; worn out tip. | Clean and re-tin the tip. Increase temperature setting. Replace the soldering tip if worn. |
8. Spécifications
Detailed technical specifications for the ALIENTEK T80 Smart Soldering Iron.
| Spécification | Valeur |
|---|---|
| Marque | ALIENTEK |
| Numéro de modèle | T80 |
| Source d'énergie | PD/DC (Type-C) |
| Quoitage | 18 - 100 watts (adjustable) |
| Vol d'exploitationtage | 9 - 20 Volts (DC) |
| Plage de température | 80 - 450 degrés Celsius |
| Dossier spécial | Portable, Digital OLED Screen, Auto Sleep |
| Matériau de la poignée | Aluminium |
| Poids de l'article | 9.6 onces (environ 272 g) |
| Code UPC | 717225381134 |
9. Garantie et assistance
ALIENTEK products are manufactured to high-quality standards. For warranty information or technical support, please contact ALIENTEK customer service through the official ALIENTEK store on Amazon or their official website. Please have your product model number (T80) and purchase details ready when contacting support.
Pour obtenir les informations les plus récentes et les ressources d'assistance, consultez le site web. ALIENTEK Store on Amazon.