Yard Force NX100i Robotic Mower User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Yard Force NX100i Robotic Mower. Please read this manual thoroughly before using the product and retain it for future reference.

The Yard Force NX100i is an advanced robotic lawnmower designed to automatically maintain your lawn. It features a 28V lithium-ion power system, Wi-Fi and Bluetooth connectivity for app control, and a smart safety suite including iRadar ultrasonic sensors, a rain sensor, and lift/tilt detection.

2. Consignes de sécurité

Always prioritize safety when operating or maintaining the robotic mower. Failure to follow safety instructions may result in injury or damage to the product.

• Lisez toutes les instructions: Familiarisez-vous avec les commandes et le bon usage de l'appareil.
• Tenir les enfants et les animaux domestiques à l'écart : Veillez à ce que les enfants et les animaux domestiques ne se trouvent pas dans la zone de tonte lorsque la tondeuse est en marche.
• Inspectez la zone : Before each use, clear the lawn of any objects such as stones, toys, or wires that could be thrown by the blades.
• Sécurité de la lame : Never attempt to lift or carry the mower while the blades are rotating. Always switch off the mower and wait for the blades to stop completely before handling.
• Arrêt d'urgence: Know the location and function of the emergency stop button.
• Évitez les conditions humides : The mower is equipped with a rain sensor. Avoid manual operation in heavy rain or very wet conditions to prevent damage and ensure safety.
• Entretien: Effectuez uniquement l'entretien décrit dans ce manuel. Pour les réparations complexes, contactez un technicien qualifié.

3. Installation

3.1 Déballage et inspection initiale

Carefully remove all components from the packaging. Inspect for any damage. Ensure all parts listed in the packing contents are present.

3.2 Emplacement des bornes de recharge

Select a suitable location for the charging station. It should be on a flat surface, away from direct sunlight or irrigation systems, and with access to a power outlet. Ensure enough clear space around the station for the mower to dock easily.

3.3 Installation du fil de délimitation

The NX100i operates within a defined area using a boundary wire. This wire must be laid around the perimeter of your mowing area and any obstacles you wish the mower to avoid.

1. Planifiez votre aménagement : Sketch your lawn area, identifying obstacles and areas to exclude.
2. Lay the wire: Secure the boundary wire to the ground using the provided pegs. Ensure the wire is taut and laid flat. For permanent installation, the wire can be buried a few inches deep.
3. Connect to charging station: Connect both ends of the boundary wire to the designated terminals on the charging station.

3.4 Charge initiale

Once the charging station and boundary wire are set up, place the mower on the charging station. The mower will begin charging. Allow for a full charge before the first operation (approximately 90 minutes for a quick recharge).

3.5 App Control and Wi-Fi Connection

Download the CloudHawk app to your smartphone. Follow the in-app instructions to connect your mower to your home Wi-Fi network and pair it with your device via Bluetooth. This enables remote control and scheduling.

3.6 Setting Cutting Height

The cutting height can be adjusted to suit your lawn's needs. The mower offers five cutting heights ranging from 1.3 to 3 inches (3.3 to 7.6 cm).

4. Utilisation de la tondeuse

4.1 Démarrage et arrêt

• Commencer: Press the 'Start' button on the mower's control panel or initiate mowing via the CloudHawk app.
• Arrêter: Press the large red 'STOP' button on the mower. The mower will cease operation immediately.

4.2 Planification des horaires de tonte

Use the CloudHawk app to set a regular mowing schedule. You can define specific days and times for the mower to operate automatically. The mower will return to its charging station when its battery is low or when its scheduled task is complete.

4.3 Smart Safety Features

• iRadar Ultrasonic Sensors: These sensors detect obstacles in the mower's path, allowing it to steer around them and prevent collisions.
• Capteur de pluie: The mower will automatically pause its operation and return to the charging station if it detects rain, resuming its schedule once conditions improve.
• Lift/Tilt Detection: If the mower is lifted or tilted during operation, the blades will immediately stop to ensure safety for people and pets.

4.4 Mowing Performance

The powerful yet quiet brushless wheel motors enable the mower to handle slopes up to 40% gradient. It cuts a 7-inch (18 cm) swath, providing efficient and consistent lawn coverage with zero emissions.

5. Entretien

5.1 Inspection et remplacement des lames

Regularly inspect the mower blades for wear or damage. Dull or damaged blades can affect cutting performance. Replace blades as needed, ensuring the mower is powered off and the battery is disconnected before handling the blades.

5.2 Nettoyage

Keep the mower clean to ensure optimal performance. Regularly remove grass clippings and debris from the chassis, wheels, and blade area. Use a soft brush or cloth. Avoid using high-pressure water jets directly on the mower.

5.3 Entretien de la batterie

The 28V lithium-ion battery is designed for long life. For best results, allow the mower to fully charge and discharge as part of its normal operation. Store the mower in a dry, protected area during off-season periods, ensuring the battery is partially charged.

6. Dépannage

If you encounter issues with your Yard Force NX100i Robotic Mower, refer to the following common troubleshooting steps:

• La tondeuse ne démarre pas : Check if the battery is charged and properly seated. Ensure the emergency stop button is disengaged. Verify the boundary wire is correctly installed and connected.
• La tondeuse se bloque : Inspect the mowing area for obstacles. Ensure the boundary wire is laid correctly around complex areas. The iRadar sensors should help avoid most obstacles.
• Performances de coupe médiocres : Check the blades for sharpness and damage. Adjust the cutting height if the grass is too long.
• Mower not returning to charging station: Verify the charging station is powered on and the boundary wire is intact. Ensure no obstacles block the path to the station.
• Problèmes de connectivité de l'application : Check your Wi-Fi and Bluetooth connections. Ensure the mower is within range of your Wi-Fi network. Restart the app and the mower if necessary.

For persistent issues, consult the full troubleshooting guide available on the Yard Force website ou contacter le support client.

7. Spécifications

8. Garantie et assistance

8.1 Informations sur la garantie

The Yard Force NX100i Robotic Mower comes with a two-year residential warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

8.2 Assistance clientèle

For technical assistance, warranty claims, or spare parts, please contact Yard Force customer support. Contact details can typically be found on the official Yard Force website ou sur l'emballage du produit.

9. Produit terminéview

Here are additional views of the Yard Force NX100i Robotic Mower:

10. Vidéo pédagogique

Regardez cette vidéo pour une présentation détaillée.view of the Yard Force NX100i Robotic Mower, including unboxing, setup, and initial operation.