1. Produit terminéview
The ZHDBD T12-Q19 is a digital soldering station designed for precision soldering tasks. It features an OLED display, quick heating capabilities, and various customizable settings for optimal performance. This manual provides essential information for the safe and effective operation of your soldering station.
Image 1.1: Devant view of the ZHDBD T12-Q19 Soldering Station, showing the OLED display with set and current temperature, voltage, and ambient temperature. The soldering iron handle is connected.
2. Consignes de sécurité
Veuillez lire et comprendre toutes les consignes de sécurité avant d'utiliser ce produit. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou des blessures graves.
- Travaillez toujours dans un endroit bien ventilé pour éviter d'inhaler les fumées de soudure.
- Portez l'équipement de protection individuelle approprié, notamment des lunettes de sécurité.
- Do not touch the soldering iron tip or heated components, as they can reach very high temperatures.
- Veillez à placer la station de soudage sur une surface stable et résistante à la chaleur.
- Coupez l'alimentation électrique avant de procéder au nettoyage ou à la maintenance.
- Tenir hors de portée des enfants.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans votre colis :
- T12-Q19 Soldering Digital Station Unit
- M8 Metal Handle Soldering Iron
- Power Cable (AC 110-240V)
- Soldering Iron Tip(s)
4. Installation
Follow these steps to set up your soldering station:
- Placement: Place the soldering station on a stable, non-flammable surface.
- Brancher le fer à souder : Connect the M8 metal handle soldering iron to the designated port on the front of the station. Ensure it is securely fastened.
- Connexion électrique : Connect the power cable to the AC 110-240V power interface on the rear of the unit. Alternatively, if using DC power, connect a DC 24V 4A power supply (not included) to the DC IN port.
- Mise sous tension : Flip the power switch on the rear panel to the 'ON' position. The OLED display will illuminate.
Image 4.1: Rear panel of the ZHDBD T12-Q19 Soldering Station, detailing the AC 110-240V power interface with a power switch, a fuse slot, and a DC 24V 4A input interface. Also shown are symbols for ground, fuse, and a default EU plug.
5. Mode d'emploi
5.1 Mise sous/hors tension
To power on, press the main power switch on the rear panel. To power off, press the switch again.
5.2 Contrôle de la température
The OLED display shows the set temperature and the current temperature of the soldering iron tip. Use the rotary encoder knob on the front panel to adjust the desired temperature. Rotate clockwise to increase temperature, counter-clockwise to decrease.
5.3 Navigation dans les menus
Press the rotary encoder knob to enter the main menu. Rotate the knob to scroll through options and press again to select. The menu includes settings such as:
- Étalonnage: For fine-tuning temperature accuracy.
- Veille automatique : Configures the time before the unit enters sleep mode.
- Arrêt automatique : Sets the duration before the unit automatically shuts down.
- Boost Duration: Sets how long the temperature boost function lasts.
- Boost Degree: Sets the temperature increase during boost mode.
- Wakeup Method: Defines how the unit exits sleep mode (e.g., raising the handle).
- Interrupteur sonore : Active ou désactive les alertes sonores.
- Battery Guard: (If applicable) Protects battery when using DC power.
- Micrologiciel : Affiche la version du micrologiciel.
Image 5.1: OLED display showing the 'Easy and Practical Setting Menu' of the ZHDBD T12-Q19 Soldering Station. Menu options include Calibration, Auto Sleep, Auto Power Off, Boost Duration, Boost Degree, Wakeup Method, Buzzer Switch, Battery Guard, and Firmware.
5.4 Quick Heating and Stability
The T12-Q19 features quick heating and stable temperature control, reaching desired temperatures rapidly for efficient soldering. The 108W power supply ensures consistent performance.
Image 5.2: Devant view of the ZHDBD T12-Q19 Soldering Station, highlighting its 108W power output. The OLED display shows temperature settings and current status.
6. Entretien
Regular maintenance ensures the longevity and performance of your soldering station.
- Conseil de nettoyage : Always clean the soldering iron tip with a damp sponge or brass wool before and after use to remove excess solder and oxidation.
- Étamer la pointe : After cleaning, apply a small amount of fresh solder to the tip to prevent oxidation and extend its life.
- Nettoyage des unités : Essuyez l'extérieur de la station avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
- Remplacement du fusible : If the unit does not power on, check the fuse located on the rear panel (refer to Image 4.1). Replace with a fuse of the same rating if necessary.
7. Dépannage
En cas de problème, veuillez consulter la liste des problèmes courants et leurs solutions ci-dessous :
| Problème | Cause possible | Solution |
|---|---|---|
| La station ne s'allume pas. | Pas de courant, câble défectueux, fusible grillé | Check power connection, test cable, replace fuse. |
| Fer à souder ne chauffe pas | Iron not connected, faulty tip, internal issue | Ensure iron is securely connected. Check tip for damage. If problem persists, contact support. |
| « ERREUR » affiché à l'écran | Connection issue, sensor fault, tip problem | Check soldering iron connection. Try a different tip if available. Power cycle the unit. |
| Lecture de température inexacte | Nécessite un étalonnage | Perform temperature calibration via the menu settings. |
Image 7.1: Côté view of the ZHDBD T12-Q19 Soldering Station, illustrating its dimensions (130mm length, 90mm width, 40mm height). The OLED display shows an 'ERROR' message, indicating a potential issue or a state during operation.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Modèle | T12-Q19 |
| Vol d'entréetage | AC 110-240V or DC 24V 4A |
| Alimentation intégrée | 24 V 4.5 A (108 W) |
| Plage de température | 150-465°C |
| Afficher | OLED 1.3 pouces |
| Composants inclus | Fer à souder |
| Fabricant | ZHDBD |
Image 8.1: Interne view of the ZHDBD T12-Q19 Soldering Station, revealing the circuit board, transformer, and other electronic components, demonstrating its 108W power supply design.
9. Garantie et assistance
Pour toute information relative à la garantie ou pour obtenir une assistance technique, veuillez vous adresser au revendeur ou au fabricant. webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.