Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NAOEVO 7-inch and 6-inch LED Light Bar Combo. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Consignes de sécurité
- Always disconnect power before installing or servicing the light bars.
- Assurez-vous que tous les branchements électriques sont bien fixés et correctement isolés afin d'éviter les courts-circuits.
- Ne regardez pas directement la lumière lorsqu'elle est en marche, car cela peut provoquer une fatigue oculaire ou des lésions oculaires.
- Install the light bars in a location that does not obstruct the driver's view ou interférer avec les systèmes de sécurité du véhicule.
- Ensure the mounting surface is strong enough to support the weight of the light bars.
- This product is waterproof; however, avoid submerging it for extended periods.
Contenu du colis
Le forfait comprend les éléments suivants :
- 1 Pair 7-inch LED Light Bar
- 1 Pair 6-inch LED Light Bar
- Installation Accessories (brackets, bolts, nuts)
Note: Wiring harness is not included and must be purchased separately. Recommended NAOEVO wire harness: B0B44RW3CY or B0B44XN2HJ.
Image: Dimensions and package list for the 7-inch LED Light Bar. Shows the light bar, its dimensions (6.5 inches wide, 3.15 inches high), and a box indicating 1 pair of 7-inch LED light bars and installation accessories.
Image: Dimensions and package list for the 6-inch LED Light Bar. Shows the light bar, its dimensions (6.1 inches wide, 1.7 inches high), and a box indicating 1 pair of 6-inch LED light bars and installation accessories.
Caractéristiques
| Fonctionnalité | Description |
|---|---|
| Marque | NAOEVO |
| Type de source lumineuse | DIRIGÉ |
| Température de couleur | 6000K (lumière blanche) |
| Quoitage (7-inch bar) | 240 W |
| Lumen (7-inch bar) | 24000 XNUMX lm |
| Quoitage (6-inch bar) | 50 W |
| Beam Pattern (7-inch bar) | 30° Spotlight & 120° Floodlight Combo |
| Beam Pattern (6-inch bar) | Floodlight (120° for broad view) |
| Matériau de la lentille | Polycarbonate |
| Dossier spécial | Étanche |
| Type de service de véhicule | Car (and other off-road vehicles) |
Configuration et installation
Follow these steps for proper installation of your NAOEVO LED Light Bars. A wiring harness is required and sold separately.
1. Montage de la barre lumineuse
- Identify a suitable mounting location on your vehicle that provides clear visibility and does not obstruct other vehicle components.
- Attach the adjustable bracket to the light bar using the provided bolts and nuts. The bracket allows for 45° adjustment of the light beam.
- Secure the light bar with the attached bracket to your desired mounting surface. Ensure all bolts are tightened securely.
Image: Illustration of the adjustable bracket, showing 45° adjustment capability for up/down/left/right positioning.
Image: Three-step visual guide for mounting the light bar: 1. Attach bracket to vehicle. 2. Attach light bar to bracket. 3. Adjust and secure.
2. Connexion du câblage
The light bars are designed for easy connection. A wiring harness (not included) is recommended for safe and efficient operation.
- Connect the positive (+) wire from the light bar to the positive terminal of your wiring harness.
- Connect the negative (-) wire from the light bar to the negative terminal of your wiring harness or a suitable ground point on the vehicle chassis.
- Ensure all connections are tight and protected from moisture and abrasion.
- Connect the wiring harness to your vehicle's power source (e.g., battery) via a relay and fuse, and connect the switch for control.
Image: Simplified wiring diagram showing two light bars connected to a wiring harness with a relay, fuse, and switch, powered by a vehicle battery.
Mode d'emploi
The NAOEVO LED Light Bars provide powerful illumination for various driving conditions. The 7-inch light bar features a spot and flood combo beam, while the 6-inch light bar provides a wide flood beam.
Diagrammes de faisceau
- 7-inch Light Bar: Combines a 30° spotlight for high-focus, long-range illumination and a 120° floodlight for wider area coverage. This combination enhances visibility for off-road driving at night.
- 6-inch Light Bar: Features a 120° flood beam, providing broad view and excellent light transmittance for clearer and wider vision.
Image: Diagram illustrating the spot and flood combo beam pattern of the 7-inch light bar. Shows a 15° spotlight for high focus and long distance, and a 120° floodlight for a wide field of vision.
Image : Gros plan view of the light bar's LEDs, detailing the 30° spotlight reflector for high focus and long distance, and the 120° flood beam for broad view with 97% light transmittance.
Mise sous/hors tension
Once properly wired, use the connected switch to turn the light bars on or off. Ensure the vehicle's electrical system can support the combined wattage of the light bars.
Entretien
Regular maintenance ensures optimal performance and longevity of your LED light bars.
- Nettoyage: Periodically clean the lens with a soft cloth and mild soap solution to remove dirt, dust, and debris. Avoid abrasive cleaners that could scratch the polycarbonate lens.
- Vérification de la connexion : Regularly inspect all wiring connections for corrosion, looseness, or damage. Ensure they remain secure and properly insulated.
- Vérification du montage : Verify that the mounting brackets and hardware are still tight and secure, especially after off-road use or exposure to vibrations.
- Joint étanche : While waterproof, avoid high-pressure washing directly at the seals.
Dépannage
If you encounter issues with your LED light bars, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La barre lumineuse ne s'allume pas. | Pas d'alimentation, connexion desserrée, fusible grillé, interrupteur défectueux. | Vérifiez l'alimentation électrique, inspectez tous les branchements électriques, remplacez le fusible s'il est grillé, testez le fonctionnement des interrupteurs. |
| La barre lumineuse est faiblement allumée ou clignote. | Insufficient power, poor ground connection, damaged wiring. | Veiller à un volume suffisanttage, check ground connection for corrosion, inspect wiring for damage. |
| Humidité à l'intérieur de la lentille. | Compromised seal, extreme temperature changes. | Small amounts of condensation may dissipate. If persistent or significant, contact support. Ensure proper installation to avoid seal damage. |
Large application
These NAOEVO LED Light Bars are versatile and suitable for a variety of applications, enhancing visibility and safety.
- Off-Road Lights: Ideal for ATVs, UTVs, SUVs, Jeeps, and other off-road vehicles.
- Work Lights: Suitable for construction vehicles, agricultural machinery, and other work environments.
- Fog Lights & Driving Lights: Improves visibility in adverse weather conditions or for extended night driving.
- Autres utilisations: Can be used for travel, long-distance transportation, or as courtyard lighting.
Image: Collage showing the LED light bars installed on various vehicles including a Jeep, a semi-truck, an ATV, and another off-road vehicle, demonstrating their wide range of applications.
Garantie et assistance
NAOEVO products are designed for durability and performance. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official NAOEVO website.
If you encounter any issues or have questions regarding your LED light bars, please contact NAOEVO customer support through their official channels or the retailer from whom you purchased the product.
Pour plus d'informations, visitez le NAOEVO Store on Amazon.