1. Produit terminéview
The kielle Siphon 30901010 is a high-quality, fully metallic washbasin siphon designed for efficient wastewater drainage and odor prevention. Its robust construction ensures durability and increased scratch resistance. This siphon is suitable for connection to drain pipes with a diameter of 32 mm.
Les principales caractéristiques comprennent :
- Full metal construction for enhanced durability.
- Easy connection to 32 mm diameter drain pipes.
- Flow rate of 30 liters per minute.
- Integrated odor trap with a 50 mm water seal.
Figure 1 : The kielle Siphon 30901010, showcasing its metallic finish and design.
2. Consignes de sécurité
Veuillez lire attentivement toutes les instructions avant l'installation et l'utilisation. Le non-respect de ces instructions peut entraîner des dommages matériels ou des blessures.
- Always turn off the water supply to the washbasin before beginning installation or maintenance.
- Portez un équipement de protection individuelle approprié, tel que des gants et des lunettes de protection, lors de l'installation.
- Assurez-vous que tous les raccords sont bien serrés afin d'éviter les fuites. Ne serrez pas trop fort, car cela pourrait endommager les composants.
- Si vous avez des doutes concernant une quelconque étape du processus d'installation, consultez un plombier qualifié.
- Gardez les petites pièces hors de portée des enfants.
3. Contenu du colis
Vérifiez que tous les composants sont présents et non endommagés avant de procéder à l'installation.
- Siphon body (under-plasterwork part)
- Nut for connecting the 5/4" outlet
- Metallic rosette
- Sealing gaskets (if not pre-installed)
4. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 30901010 |
| Marque | kielle |
| Matériel | Brass with chrome finish |
| Connection to Drain Pipe | Ø32 mm |
| Odor Trap (Water Seal) | 50 mm |
| Débit | 30 l/min |
| Couleur | Métallique |
Figure 2 : Technical drawing of the kielle Siphon 30901010, showing key dimensions and connections. Note the G 5/4" connection for the washbasin outlet and the Ø32 mm connection for the drain pipe.
5. Installation
Follow these steps for proper installation of your kielle Siphon 30901010.
- Préparez la zone : Ensure the water supply to the washbasin is turned off. Clear the area under the washbasin pour un accès facile.
- Remove Old Siphon (if applicable): Place a bucket under the existing siphon to catch any residual water. Loosen the nuts connecting the old siphon to the washbasin drain and the wall drain pipe. Carefully remove the old siphon.
- Install Siphon Body: Attach the siphon body to the washbasin drain outlet. Ensure the sealing gasket is correctly positioned between the washbasin drain and the siphon body. Tighten the nut (5/4" connection) by hand, then use a wrench for a final snug fit, being careful not to overtighten.
- Raccordement au tuyau d'évacuation : Connect the horizontal outlet of the siphon to the wall drain pipe (Ø32 mm). Use the provided nut and sealing gasket. Ensure a proper seal to prevent leaks.
- Attacher la rosette : Slide the metallic rosette against the wall to cover the connection point, if applicable.
- Test de fuites : Once all connections are secure, slowly turn on the water supply to the washbasinRemplissez le basin and then drain the water, observing all connections for any signs of leakage. If leaks occur, tighten the respective connections slightly. Do not overtighten.
Note: For under-plasterwork installations, ensure the siphon body is correctly integrated into the wall structure according to local plumbing codes.
6. Fonctionnement
The kielle Siphon 30901010 operates passively to prevent sewer gases from entering your living space while allowing wastewater to drain efficiently. The U-bend design maintains a water seal (50 mm) that blocks odors. No user interaction is required for its basic operation beyond ensuring proper installation and occasional maintenance.
7. Entretien
Regular maintenance helps ensure the longevity and proper function of your siphon.
- Nettoyage: Periodically clean the siphon to prevent blockages from hair, soap scum, and other debris. This can be done by unscrewing the bottom cap (if present) or by disassembling the siphon. Always place a bucket underneath to catch water and debris.
- Évitez les produits chimiques agressifs : Do not use harsh chemical drain cleaners, as these can damage the chrome finish and internal components over time. Use natural alternatives or a plumbing snake for stubborn clogs.
- Vérifiez les fuites : Occasionally inspect the connections for any signs of drips or leaks. Tighten connections as needed, but avoid overtightening.
- Entretien des surfaces : Clean the exterior chrome finish with a soft cloth and mild, non-abrasive cleaner.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Drainage lent | Partial blockage in the siphon or drain pipe. | Clean the siphon by disassembling it or using a plumbing snake. Avoid chemical drain cleaners. |
| Fuite d'eau | Loose connections or damaged gaskets. | Check and tighten all nuts. Inspect gaskets for damage and replace if necessary. Ensure gaskets are properly seated. |
| Mauvaises odeurs | Siphon water seal has evaporated or is compromised; blockage. | Run water for a minute to refill the water seal. If odors persist, check for blockages or ensure the siphon is correctly installed and sealed. |
9. Garantie et assistance
Specific warranty information for the kielle Siphon 30901010 is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for details regarding warranty coverage and duration.
For technical support, spare parts, or further assistance, please contact kielle customer service through their official website or the retailer from whom you purchased the product. When contacting support, please have your model number (30901010) and purchase date available.
