Introduction
Thank you for choosing the multicomp PRO 10-inch PA/DJ Floor Monitor Speaker. This passive speaker is designed for professional audio applications, offering robust construction and clear sound reproduction. This manual provides essential information for the proper setup, operation, and maintenance of your speaker to ensure optimal performance and longevity.
Installation
1. Déballage
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging for future transport or storage.
2. Placement
This speaker is designed for floor standing applications, typically used as a stage monitor or a main PA speaker in medium to large venues. Position the speaker on a stable, flat surface. Ensure adequate space around the unit for proper sound dispersion and heat dissipation from any connected amplifier.
3. Connexions
The multicomp PRO floor monitor is a passive speaker and requires an external amplifier for operation. Connect the speaker to a suitable amplifier using appropriate speaker cables. The speaker features RCA and binding post connections.
- Connexions RCA : Use RCA cables to connect to compatible amplifier les sorties.
- Messages de liaison : For a secure and high-quality connection, use speaker wire with banana plugs or bare wire ends. Ensure correct polarity (+ to + and - to -) to avoid phase issues.
Assurez-vous toujours que amplifier is turned off before making any connections to prevent damage to the speaker or amplifier.
Image : Arrière view of the speaker, highlighting the recessed handle and various input connections including binding posts.
Mode d'emploi
1. Mise sous tension
Once all connections are securely made, turn on your external amplifier. Gradually increase the amplifier's volume to a desired listening level.
2. Contrôle du volume
Volume adjustments should be made primarily through your connected amplifier or mixing console. Avoid operating the speaker at excessively high volumes for extended periods to prevent potential damage.
3. Modes audio
The speaker supports both stereo and mono audio output modes, depending on your amplifier and system configuration.
4. Appareils compatibles
This speaker can be connected to a variety of audio sources via a suitable amplifier, including desktop computers, laptops, MP3 players, smartphones, tablets, and televisions.
Image : Angle de face view de l'orateur, montreasing the protective metal grill and overall design.
Entretien
1. Nettoyage
To clean the speaker, use a soft, dry cloth. For the metal grill, a soft brush can be used to remove dust. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
2. Stockage
When not in use, store the speaker in a dry, cool environment, away from direct sunlight and extreme temperatures. If storing for extended periods, consider using the original packaging or a protective cover to prevent dust accumulation.
3. Manipulation
The speaker is equipped with recessed handles for easier transport. Always lift the speaker using these handles. Despite its heavy-duty construction, avoid dropping or subjecting the unit to strong impacts.
4. Considérations environnementales
This product is not waterproof. Protect it from rain, splashes, and high humidity. Operating the speaker in wet conditions can lead to electrical hazards and damage to the unit.
Dépannage
- Pas de son :
- Assurez-vous que ampL'amplificateur est allumé et son volume n'est pas au minimum.
- Check all cable connections between the speaker and the amplifier, ensuring they are secure and correctly polarized.
- Verify the audio source is playing and its output is active.
- Essayez avec un câble différent ou ampSi possible, utilisez un générateur pour isoler le problème.
- Son déformé :
- Réduisez le volume du amplifier and audio source. Overdriving the speaker can cause distortion.
- Vérifiez si les câbles sont endommagés ou si les connexions sont desserrées.
- Assurez-vous que ampL'impédance de l'amplificateur correspond à l'impédance de 8 ohms du haut-parleur.
- Faible volume :
- Augmentez le volume sur les deux ampAmplificateur et source audio.
- Confirmez que le amplifier's power output is sufficient for the speaker's power handling (110W RMS, 220W peak).
- Check for any attenuation settings on the amplificateur ou mélangeur.
Caractéristiques
| Fonctionnalité | Spécification |
|---|---|
| Marque | multicomp PRO |
| Nom du modèle | 10-inch PA/DJ Floor Monitor Speaker |
| Type de haut-parleur | Woofer, Floor Monitor |
| Taille du haut-parleur | 10 pouces |
| Diamètre du woofer | 10 pouces |
| Type de tweeter | Piezoelectric Horn Tweeters |
| Diamètre du tweeter | 2.54 centimètres |
| Gestion de la puissance (RMS) | 110 W |
| Gestion de la puissance (crête) | 220W (400W Max Output) |
| Réponse en fréquence | 50Hz - 20KHz |
| Impédance | 8 ohms |
| SPL (niveau de pression acoustique) | 90 dB |
| Matériel | Metal (Grill), Heavy Duty Black Steel Frame |
| Couleur | Noir |
| Dimensions du produit (P x L x H) | 18" x 23" x 25.5" |
| Poids de l'article | 30 livres |
| Technologie de connectivité | RCA, Binding Posts |
| Mode de sortie audio | Stéréo, Mono |
| Type de montage | Debout au sol |
| Source d'énergie | Requires external amplifier (Passive Speaker) |
| Étanche | Non |
| Code UPC | 713179654508 |
Informations sur la garantie
This multicomp PRO speaker comes with a Limited Warranty. Please refer to the warranty documentation provided at the time of purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact multicomp PRO customer support. Refer to the contact information provided with your product or visit the official multicomp PRO website pour les détails de l'assistance.