1. Introduction
This manual provides essential information for the safe and effective operation of your SHEHDS 200W COB Par Light. This professional stage lighting fixture features a 200W COB LED, offering both cool white (4500K) and warm white (3500K) illumination. Designed with an IP65 waterproof rating and a fanless, muted operation, it is suitable for various indoor and outdoor applications. Please read this manual thoroughly before installation and use.
2. Consignes de sécurité
- Sécurité électrique : Assurer l'alimentation voltage matches the specified requirements of the fixture. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
- Installation: Install the fixture in a well-ventilated area, away from flammable materials. Ensure mounting surfaces and hardware can support the weight of the fixture.
- Température: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for heat dissipation.
- Protection des yeux : Évitez toute exposition directe des yeux à la source lumineuse, car cela peut causer des lésions oculaires.
- Indice d'étanchéité : The fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use in rain, avoid submerging the unit.
- Entretien: Confiez toute intervention à un personnel qualifié. N'essayez pas de réparer l'appareil vous-même.
3. Contenu du colis
Vérifiez que tous les articles sont présents lors du déballage :
- SHEHDS 200W COB Par Light (1 unit)
- Manuel d'instructions (1 exemplaire)
- Signal Line (1 unit)
- Cordon d'alimentation (1 unité)
Image: Contents of the SHEHDS 200W COB Par Light package.
4. Produit terminéview et fonctionnalités
The SHEHDS 200W COB Par Light is engineered for robust performance and versatility in various lighting scenarios.
- Conception imperméable d'IP65: Features a durable cast aluminum shell with waterproof signal lines, power cords, and control buttons, ensuring reliable operation in outdoor conditions.
- High-Brightness COB LED: Equipped with a 200W COB (Chip-on-Board) LED, providing uniform and powerful cool white (4500K) or warm white (3500K) illumination. The light is designed to be non-glare and eye-safe.
- Fanless Muted Operation: Operates silently without a cooling fan, making it ideal for environments where noise reduction is critical.
- Grand angle de faisceau : Offers a beam angle of 65°-70°, with an effective range of up to 10 meters.
- Strobe and Dimmer Functions: Includes a shuttle flash rate of 0-10Hz and a 0-100% mechanical dimmer for dynamic lighting effects.
- Construction durable : Built with a sturdy aluminum alloy shell and a long-lasting COB light source, ensuring an LED lifespan exceeding 60,000 hours.
Image : Avant view of the SHEHDS 200W COB Par Light, illustrating its cool and warm white capabilities and IP65 rating.
Image: Close-up of the light's waterproof design and rear control panel.
5. Configuration et installation
The SHEHDS 200W COB Par Light is designed for flexible installation. Always ensure the fixture is securely mounted to prevent accidents.
5.1 options de montage
- Montage au sol : The integrated dual mounting brackets allow the light to be placed directly on a flat surface. Adjust the angle using the durable knobs on the sides.
- Ceiling/Truss Mount: The flexible dual mounting brackets can also be used to hang the fixture from a ceiling or truss system. Ensure appropriate clamps and safety cables (not included) are used and rated for the fixture's weight (approximately 10.78 lbs / 5.05 kg).
5.2 Connexion d'alimentation
Connect the provided power cord to the fixture's power input and then to a suitable grounded power outlet. Ensure the power source meets the fixture's electrical requirements.
5.3 Connexion DMX (en option)
For DMX control, connect a DMX signal line from your DMX controller to the DMX IN port of the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. The fixture uses waterproof DMX connectors; ensure you use compatible cables or adapters.
Image: Dimensions and weight of the SHEHDS 200W COB Par Light.
6. Mode d'emploi
The SHEHDS 200W COB Par Light can be operated via its onboard control panel or an external DMX controller.
6.1 Panneau de commande intégré
The back control panel features a digital display and buttons to navigate menus and adjust settings. Press the 'Menu' button to cycle through options, 'Up'/'Down' to change values, and 'Enter' or 'OK' to confirm. Specific modes and settings include:
- Réglage de l'adresse DMX : Set the DMX starting address for external control. Once set and confirmed, the address is preserved even after power cycling.
- Variateur manuel : Adjust the light intensity from 0-100%.
- Effet stroboscopique : Activate and adjust the flash rate from 0-10Hz.
- Sélection de couleur : Switch between Cool White (4500K) and Warm White (3500K) modes.
Image : Examples of warm white and cool white lighting effects.
Image: Direct comparison of warm white and cool white output.
7. Contrôle DMX
The SHEHDS 200W COB Par Light is compatible with DMX512 protocol, allowing for professional control over its functions.
7.1 DMX Channel Assignment
Refer to the specific DMX channel chart provided with your fixture for detailed channel assignments. Typically, channels will control:
- Canal 1: Gradateur principal (0-100 %)
- Canal 2: Intensité du blanc froid
- Canal 3: Intensité du blanc chaud
- Canal 4: Strobe Speed (0-10Hz)
Consult the fixture's display for the current DMX address and mode settings. Ensure your DMX controller is configured to match the fixture's address and channel mode.
8. Entretien
Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 200W COB Par Light.
- Nettoyage: Periodically clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check power and signal cables for any signs of damage. Ensure all mounting hardware is secure.
- Stockage: Lorsqu'il n'est pas utilisé, rangez le dispositif dans un endroit sec et exempt de poussière.
9. Dépannage
If you encounter issues with your SHEHDS 200W COB Par Light, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | Pas d'alimentation électrique ; câble défectueux ; problème interne. | Vérifiez le branchement et la prise électrique. Essayez avec un autre câble d'alimentation. Si le problème persiste, contactez l'assistance technique. |
| Pas de contrôle DMX. | Incorrect DMX address; faulty DMX cable; DMX controller issue; incorrect DMX mode. | Verify DMX address on fixture and controller. Check DMX cable connections. Ensure DMX mode is active on the fixture. |
| L'éclairage est irrégulier ou vacillant. | Unstable power supply; DMX signal interference; internal component issue. | Ensure stable power. Check DMX connections for interference. If problem persists, contact support. |
| Fixture becomes excessively hot. | Poor ventilation; prolonged operation in high ambient temperature. | Ensure adequate airflow around the fixture. Reduce ambient temperature if possible. |
10. Spécifications
Technical specifications for the SHEHDS 200W COB Par Light (Model: 200W_IP65).
| Fonctionnalité | Détail |
|---|---|
| Source de lumière | 1 LED COB 200W |
| Température de couleur | Cool White (4500K) / Warm White (3500K) |
| Quoitage | 200 watts |
| Angle du faisceau | 65-70 degrés |
| Variateur | 0-100% Mechanical Dimmer |
| Taux stroboscopique | 0-10 Hz |
| Modes de contrôle | DMX512, Manual Control |
| Canaux DMX | Refer to product-specific DMX chart |
| Indice de protection IP | IP65 (étanche) |
| Matériel | Alliage d'aluminium |
| Dimensions (L x l x H) | 3 po L x 9 po l x 11 po H (environ 7.6 cm L x 22.9 cm l x 27.9 cm H) |
| Poids | 10.78 livre (environ 5.05 kg) |
| Source d'énergie | Électrique avec fil |
| Amprage | 2 Amps |
11. Garantie et assistance
SHEHDS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official SHEHDS webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.