Manuel d'utilisation de l'accessoire chauffant Hyperice Hypervolt

1. Introduction

The Hyperice Hypervolt Heated Head Attachment is designed to enhance your percussion massage experience. This attachment is compatible with all Hypervolt models and helps to relax tight muscles and maintain range of motion by combining heat with percussion therapy.

Image 1.1: The Hyperice Hypervolt Heated Head Attachment.

2. Consignes de sécurité

Veuillez lire attentivement toutes les consignes de sécurité et les instructions avant d'utiliser ce produit. Le non-respect de ces instructions peut entraîner des blessures ou endommager l'appareil.

• Utiliser uniquement selon les instructions.
• Ne pas utiliser sur des plaies ouvertes ou une peau lésée.
• Consult a physician before use if you have a medical condition or are taking any medications.
• Stop use if you experience pain or discomfort.
• Tenir hors de portée des enfants. Ce produit n'est pas destiné à être utilisé par des enfants.
• Ne pas utiliser pendant le sommeil ou dans la baignoire.
• Débranchez l'appareil lorsqu'il n'est pas utilisé.
• N'utilisez pas un cordon d'alimentation ou une prise endommagés.
• Do not submerge in water or expose to rain or wet conditions.
• Do not use with oils, lotions, or creams.
• Do not exceed the recommended massage time without a break.
• This product is not a substitute for professional medical care.

Image 2.1: Regulatory markings on the base of the attachment.

3. Ce qui est inclus

Your Hyperice Hypervolt Heated Head Attachment package includes:

• One (1) Hyperice Hypervolt Heated Head Attachment
• One (1) USB-C Charging Cable

Image 3.1: Contents of the package: Heated Head Attachment and USB-C cable.

4. Configuration et chargement

4.1 Attaching to Your Hypervolt Device

1. Ensure your Hypervolt massager is powered off and compatible with the Heated Head Attachment.
2. Gently push and twist the Heated Head Attachment onto the Hypervolt massager's head slot until securely seated.

Image 4.1: The Heated Head Attachment being connected to a Hypervolt device.

4.2 Charging the Heated Head Attachment

The Heated Head Attachment has an internal battery that powers its heating function. Charge the attachment using the provided USB-C cable.

• Connect the USB-C cable to the charging port on the Heated Head Attachment.
• Connectez l'autre extrémité du câble USB-C à un adaptateur secteur USB compatible (non inclus).
• A full charge provides approximately 75 minutes of heated operation.

Image 4.2: The Heated Head Attachment with its USB-C charging cable.

5. Mode d'emploi

Once the Heated Head Attachment is securely attached and charged, you can begin your heated percussion massage.

1. Power on your Hypervolt massager.
2. Press the single button on the Heated Head Attachment to cycle through the three heat levels:
   • Niveau 1 : 109°F (43°C)
   • Niveau 2 : 115°F (46°C)
   • Niveau 3 : 120°F (49°C)
3. Apply the massager with the Heated Head Attachment to your desired muscle group for relaxation, pain relief, and increased blood flow.
4. To turn off the heat, cycle through the heat levels until the indicator lights are off, or power off the Hypervolt device.

Image 5.1: Using the Heated Head Attachment for neck massage.

Image 5.2: Applying the Heated Head Attachment to a thigh muscle.

6. Entretien

To ensure the longevity and optimal performance of your Heated Head Attachment, follow these maintenance guidelines:

• Nettoyage: Effacez la pièce jointe avec l'annonceamp cloth after each use. Do not use harsh chemicals or abrasive cleaners. Ensure the device is completely dry before storing or recharging.
• Stockage: Store the attachment in a cool, dry place away from direct sunlight and extreme temperatures.
• Entretien de la batterie: For best battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

7. Dépannage

If you encounter any issues with your Hyperice Hypervolt Heated Head Attachment, consider the following:

• Pas de chaleur: Ensure the attachment is fully charged. Verify that the heat setting is activated by pressing the button.
• Pièce jointe non sécurisée : Re-attach the head, ensuring it is pushed and twisted firmly into place on your Hypervolt device.
• Problèmes de charge : Check the USB-C cable for damage and ensure it is properly connected to both the attachment and a working power source.

For further assistance, please contact Hyperice customer support.

8. Spécifications

Image 8.1 : Détail view of the Heated Head Attachment.

9. Garantie et assistance

For warranty information and customer support, please visit the official Hyperice webConsultez leur site web ou contactez leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Fabricant: Hyperice

Website: www.hyperice.com