RAIJINTEK ZOFOS ULTRA E-ATX Full Tower PC Case Instruction Manual

1. Introduction

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your RAIJINTEK ZOFOS ULTRA E-ATX Full Tower PC Case. Please read this manual carefully before beginning assembly to ensure correct setup and to maximize the performance and lifespan of your system components. This chassis is designed to accommodate high-performance PC builds with extensive cooling and storage capabilities.

2. Principales caractéristiques

• Prise en charge de la carte mère : E-ATX, ATX, M-ATX, ITX for broad compatibility.
• Espace de stockage important : Supports up to 14 x 3.5" (or 2.5") HDDs and 3 x 2.5" SSDs, plus a 5.25" ODD.
• Refroidissement avancé : Capable of accommodating up to 15 x 120mm fans for superior airflow.
• Liquid Cooling Ready: Supports multiple radiator configurations (up to 480mm).
• Éclairage ARGB : Integrated front panel ARGB lighting with easy control.
• Panneaux en verre trempé : Side and front tempered glass for component visibility.
• USB Type-C : Front I/O panel includes a USB Type-C port for modern connectivity.
• Removable Support: Features removable HDD expansion brackets and magnetic dust filters for flexibility and easy maintenance.

3. Guide de configuration

3.1 Déballage et préparation

Carefully remove the chassis from its packaging. Inspect for any damage that may have occurred during shipping. Place the chassis on a stable, flat surface. Remove the side tempered glass panel by unscrewing the thumb screws and gently pulling the panel away.

3.2 Component Compatibility Overview

Before installing components, review the maximum supported dimensions for your hardware to ensure compatibility with the ZOFOS ULTRA case.

3.3 Installation de la carte mère

Install the necessary standoffs for your motherboard form factor (E-ATX, ATX, M-ATX, or ITX). Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

3.4 Installation du bloc d'alimentation (PSU)

Mount your ATX power supply into the designated PSU bay. Ensure the PSU fan faces the correct direction for optimal airflow, typically downwards if there is a filtered vent, or upwards if drawing air from inside the case. Secure the PSU with screws from the rear of the chassis.

3.5 Installation du périphérique de stockage

The ZOFOS ULTRA offers flexible storage options. Utilize the drive bay brackets for installing 3.5-inch HDDs or 2.5-inch SSDs. The case also supports a 5.25-inch Optical Disc Drive (ODD).

3.6 Installation du système de refroidissement (ventilateurs et radiateurs)

The ZOFOS ULTRA supports extensive air and liquid cooling configurations. Install fans according to your cooling needs. The case can accommodate up to 15 x 120mm fans across various locations.

For liquid cooling, the case supports radiators in multiple positions:

• Haut: Up to 480/420/360/280/240mm x 1
• Devant: Up to 480/420/360/280/240mm x 1
• MB Plate: Up to 360/240mm x 1
• Arrière: Up to 140/120mm x 1

3.7 Installation de la carte graphique (VGA)

Install your graphics card into the appropriate PCIe slot on your motherboard. The ZOFOS ULTRA supports VGA cards up to 370mm in length, or up to 540mm if the HDD cage is removed.

3.8 Gestion des câbles

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables effectively. Proper cable management improves airflow and aesthetics.

4. Mode d'emploi

4.1 Mise sous tension de votre système

Once all components are installed and cables are connected, close the side panel. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front I/O panel to start your system.

4.2 Contrôle de l'éclairage ARGB

The ZOFOS ULTRA features integrated ARGB lighting on the front panel. This lighting can be controlled directly from the front panel LED button, allowing you to cycle through various lighting effects and colors without additional software.

5. Entretien

5.1 Nettoyage des filtres à poussière

The ZOFOS ULTRA is equipped with magnetic dust filters for easy removal and cleaning. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your PC. Simply remove the filters, clean them with water or a soft brush, and reattach them once dry.

5.2 Nettoyage général

Use a soft, dry cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid using abrasive cleaners or solvents.

6. Dépannage

• Le système ne s'allume pas : Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the PSU switch is in the 'ON' position.
• Ventilateurs non fonctionnels/ARGB non fonctionnel : Verify that all fan and ARGB headers are correctly connected to the motherboard or a dedicated controller. Check the front panel ARGB control button.
• Aucune sortie d'affichage : Ensure your monitor cable is connected to the graphics card (not the motherboard integrated graphics, unless you are using integrated graphics). Reseat the graphics card and RAM modules.
• Problèmes de surchauffe : Confirm all fans are installed correctly and spinning. Clean dust filters and ensure proper airflow within the case. Check CPU cooler and GPU cooler mounting.

7. Spécifications

7.1 Dimensions

The physical dimensions of the RAIJINTEK ZOFOS ULTRA case are crucial for planning your build and placement.

8. Garantie et assistance

For warranty information and technical support, please refer to the official RAIJINTEK website or contact their customer service directly. Keep your proof of purchase for warranty claims. This manual does not supersede any warranty terms provided by the manufacturer.