1. Produit terminéview
The Parryware Cute Range One Piece Rim Western Commode (Model C8851) is designed for modern bathrooms, offering both functionality and aesthetic appeal. This floor-mounted unit features a seamless one-piece ceramic structure with an exposed flush tank, simplifying cleaning and maintenance. It is equipped with a standard S-Trap outlet for versatile plumbing configurations and includes a soft-close seat cover for quiet operation.
Figure 1 : Face avant view of the Parryware Cute Range One Piece Western Commode C8851, showcasing son design compact et intégré.
Caractéristiques principales :
- One-Piece Floor-Mounted Rim Design (640×360×710mm) for sleek aesthetics and easy cleaning.
- Standard 220mm S-Trap outlet for compatibility with typical bathroom layouts.
- Soft-Close Seat Cover for quiet and comfortable use.
- Constructed from high-gloss vitreous china with an anti-germ glaze.
- Includes a dual-flush cistern for water efficiency.
2. Contenu du colis
Avant de commencer l'installation, vérifiez que tous les composants sont présents et en bon état. Si des pièces sont manquantes ou endommagées, contactez le service client.
- One-Piece Western Commode (Toilet Bowl with integrated cistern)
- Soft-Close Seat Cover
- Dual-Flush Cistern Mechanism (pre-installed or separate)
- Quick Connect Fixtures
- Wax Seal Ring
- Floor Screws and Anchors
- Installation Accessories (e.g., bolts, washers)
3. Consignes de sécurité
Read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Portez toujours un équipement de protection individuelle (EPI) approprié, tel que des gants et une protection oculaire, pendant l'installation.
- Ensure the water supply to the installation area is turned off before beginning any plumbing work.
- Manipulez les composants en céramique avec précaution pour éviter les ébréchures ou les cassures.
- Do not overtighten fasteners, as this can crack the ceramic.
- En cas de doute sur une étape quelconque de l'installation, consultez un plombier qualifié.
4. Configuration et installation
This commode is designed for floor-mounted installation with an S-Trap outlet. Professional installation is recommended.
Outils requis (non inclus) :
- Clé à molette
- Tournevis (Phillips/Plat)
- Drill with appropriate masonry bit (if new floor anchors are needed)
- Niveau
- Mètre à ruban
- Sealant (e.g., silicone caulk)
Étapes d'installation :
- Préparez la zone : Turn off the water supply. Remove the old toilet if applicable and clean the flange area thoroughly. Ensure the floor is level and the S-Trap outlet is clear.
- Installer le sceau de cire : Place the wax seal ring onto the toilet's waste outlet or directly onto the floor flange, ensuring a good seal.
- Position the Commode: Carefully lift and align the commode over the floor bolts and the wax seal. Gently lower it, pressing down firmly to compress the wax seal. Do not rock the commode.
- Fixer au sol : Install the washers and nuts onto the floor bolts. Hand-tighten first, then use a wrench to tighten evenly, alternating between bolts. Ne pas trop serrer to avoid cracking the ceramic.
- Raccorder l'alimentation en eau : Connect the water supply line to the fill valve inlet on the cistern. Ensure all connections are hand-tightened, then use a wrench for a final snug fit.
- Install Seat Cover: Attach the soft-close seat cover according to its specific instructions, typically involving inserting hinges into designated holes and securing them.
- Test et scellage : Turn on the water supply and check for leaks. Flush the commode several times to ensure proper operation of the dual-flush mechanism. Once satisfied, apply a bead of silicone sealant around the base of the commode where it meets the floor, leaving a small gap at the back for ventilation.
Figure 2 : Côté view of the commode, illustrating the integrated cistern and the floor-mounted design for S-Trap plumbing.
5. Mode d'emploi
The Parryware C8851 commode features a dual-flush system for water conservation and a soft-close seat for user comfort.
Rinçage :
- Half Flush (Liquid Waste): Press the smaller button on the top of the cistern for a reduced water flush.
- Full Flush (Solid Waste): Press the larger button for a complete water flush.
Siège à fermeture en douceur :
The seat and lid are designed to close slowly and quietly. Simply push the seat or lid down gently, and it will lower itself without slamming.
6. Entretien et nettoyage
Regular cleaning and proper maintenance will ensure the longevity and hygiene of your commode.
Nettoyage de la surface en céramique :
- Utilisez un chiffon doux ou une éponge avec de l'eau et du savon doux.
- For tougher stains, use a non-abrasive bathroom cleaner specifically designed for ceramic surfaces.
- Rincer abondamment à l'eau claire et sécher avec un chiffon doux pour éviter les taches d'eau.
- Éviter: Abrasive cleaners, scouring pads, strong acids, or bleach, as these can damage the anti-germ glaze and ceramic finish.
Cleaning the Seat Cover:
- Clean the seat and lid with mild soap and water.
- Do not use harsh chemicals or abrasive cleaners, as they can discolor or damage the seat material.
Entretien interne :
- Periodically check the cistern mechanism for proper function.
- If the flush mechanism becomes sluggish, consult the manufacturer's guide for internal component cleaning or replacement.
7. Dépannage
This section addresses common issues you might encounter with your commode.
| Problème | Cause possible | Solution |
|---|---|---|
| Chasse d'eau faible | Low water level in cistern, partially closed water supply valve, clogged rim jets. | Check water supply valve is fully open. Adjust water level in cistern. Clean rim jets with a small wire or brush. |
| Continuous Water Running | Faulty flapper/seal, misaligned fill valve, debris in fill valve. | Inspect flapper/seal for wear or obstruction and replace if necessary. Check fill valve alignment and clean any debris. |
| Slow Cistern Refill | Partially closed water supply valve, clogged fill valve. | Ensure water supply valve is fully open. Clean or replace the fill valve if clogged. |
| Fuites à la base | Improperly seated wax seal, loose floor bolts, cracked ceramic. | Tighten floor bolts evenly (do not overtighten). If leak persists, remove commode and replace wax seal. Inspect for ceramic cracks. |
8. Spécifications
| Numéro de modèle | C8851 |
| Dimensions (L x l x H) | 64 x 36 x 71 Centimeters (640 x 360 x 710 mm) |
| Poids | 34 kg |
| Couleur | Blanc |
| Matière principale | Vitreous China (Ceramic) |
| Type d'installation | Fixé au sol |
| Type de piège | S-Trap (220mm) |
| Type affleurant | Chasse d'eau double |
| Fabricant | Produits de salle de bain Roca Pvt. Ltd. |
9. Garantie et assistance
This Parryware commode is backed by a commitment to quality and durability.
Informations sur la garantie :
- A 10-year ceramic warranty is provided, covering manufacturing defects in the vitreous china components.
- Warranty terms and conditions apply. Please retain your proof of purchase.
Assistance clientèle :
For technical assistance, warranty claims, or to inquire about replacement parts, please contact Parryware customer service. Refer to the official Parryware webPour obtenir nos coordonnées actuelles, veuillez consulter notre site web ou vos documents d'achat.
Fabricant: Produits de salle de bain Roca Pvt. Ltd.