Flashpoint Wave Commander II Camera Release Cable User Manual

1. Introduction

This manual provides instructions for the proper setup, operation, and maintenance of the Flashpoint Wave Commander II Camera Release Cable. This accessory is designed to provide remote shutter control and intervalometer functions for compatible cameras equipped with a Canon Sub-Mini Connector.

Please read this manual thoroughly before using the product to ensure safe and effective operation.

2. Produit terminéview

The Flashpoint Wave Commander II Camera Release Cable is a durable and reliable accessory that connects to your camera's remote port. It facilitates remote shutter release, reducing camera shake for sharper images, and offers advanced functions such as an intervalometer for time-lapse photography and a self-timer when used with a compatible remote unit.

Figure 1 : Flashpoint Wave Commander II Camera Release Cable. This image shows the cable with its connectors, designed for remote camera control.

Les principales caractéristiques comprennent :

• Portée étendue : A 3-foot cable length allows for remote operation, preventing camera shake.
• Stabilité améliorée : Eliminates vibrations caused by direct shutter button presses.
• Construction durable : Built for regular use and reliable performance.
• Multifonctionnel: Enables remote shutter release, intervalometer, or self-timer functions when paired with a compatible remote unit.

3. Compatibilité

This cable is compatible with cameras featuring a Canon Sub-Mini Connector. Verified compatible camera models include, but are not limited to:

• Canon R6 II, R7, T7, R6, R, SX70, 90D, T8i, R10, RP, SL3, RP, G1X Mark III, 80D
• Fujifilm X-T5, FUJIFILM X-T30 II, FUJIFILM X-T4, FUJIFILM GFX 100S

For other camera models, please verify the connector type before use.

4. Installation

Follow these steps to connect the Wave Commander II Camera Release Cable to your camera:

1. Localisez le port distant : Identify the remote control terminal on your camera. This is typically a small port, often labeled with a remote control icon or "REMOTE". For Canon cameras, this is the Sub-Mini Connector port.
2. Connectez le câble : Gently insert the connector end of the Wave Commander II cable into the camera's remote port. Ensure it is fully seated to establish a secure connection.
3. Connect to Remote Unit (if applicable): If using with a separate remote trigger unit (e.g., Flashpoint Wave Commander II remote), connect the other end of the cable to the designated port on the remote unit.
4. Mise sous tension : Turn on your camera and the remote unit (if applicable).

The cable is now ready for operation.

5. Mode d'emploi

Once connected, the Wave Commander II cable enables various remote control functions:

5.1. Remote Shutter Release

• Demi-pression : Press the shutter button on your remote unit (or the cable's integrated button, if present) halfway down to activate autofocus and metering, similar to pressing the camera's shutter button halfway.
• Presse complète : Press the shutter button fully down to trigger the camera's shutter and capture a photograph.
• Mode ampoule : For long exposures in Bulb mode, press and hold the shutter button on the remote unit. Release the button to end the exposure. Some remote units may have a lock function for extended Bulb exposures.

5.2. Intervalometer / Self-Timer Functions

When used with a compatible remote unit that features intervalometer or self-timer capabilities, the cable transmits these commands to the camera. Refer to your remote unit's specific manual for detailed instructions on setting up time-lapse sequences, delayed shots, or continuous shooting modes.

6. Entretien

To ensure the longevity and optimal performance of your Wave Commander II Camera Release Cable, follow these maintenance guidelines:

• Stockage: Rangez le câble dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes. Évitez de l'enrouler trop serré ou de le plier brusquement, car cela pourrait endommager les fils internes.
• Nettoyage: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners, solvents, or abrasive materials.
• Manutention: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling directly on the cable itself.
• Inspection: Inspectez régulièrement le câble afin de détecter tout signe d'usure, d'effilochage ou de dommage au niveau des connecteurs. Cessez immédiatement toute utilisation en cas de dommage constaté.

7. Dépannage

If you encounter issues with your Wave Commander II Camera Release Cable, consider the following:

• Cable Not Responding:
  • Ensure the cable is securely connected to both the camera and the remote unit (if applicable).
  • Verify that the camera and remote unit are powered on.
  • Check camera settings to ensure remote control is enabled, if applicable.
  • Test with another compatible camera or remote unit if available, to isolate the issue.
• Connexion intermittente :
  • Inspect connectors for dirt, dust, or damage. Clean gently with a dry, soft brush if necessary.
  • Ensure the cable is not strained or bent at sharp angles during use.
• Camera Shake Still Occurs:
  • While the cable reduces shake from pressing the shutter, other factors like tripod stability or wind can still cause movement. Ensure your camera setup is stable.

If problems persist, contact Flashpoint customer support for further assistance.

8. Spécifications

9. Garantie et assistance

Specific warranty information for the Flashpoint Wave Commander II Camera Release Cable is not provided in this document. For details regarding warranty coverage, technical support, or service inquiries, please contact Flashpoint customer service directly or refer to the official Flashpoint website.

Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.