Introduction
The LQWELL Solar Torch Light provides an ambient flame effect for outdoor decoration. These lights are solar-powered, automatically turning on at dusk and off at dawn. Designed for durability, they are waterproof and can withstand various weather conditions.
Composants du produit
Each LQWELL Solar Torch Light unit consists of the following parts:
- Torch head with integrated solar panel and LED flame effect.
- Extension pipe.
- Ground stake.
Image: Components and dimensions of the LQWELL Solar Torch Light. The torch head measures 21.5cm, the extension pipe 21.1cm, and the ground stake 12cm. When fully assembled, the torch light stands approximately 50cm tall.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 90009 |
| Type de source lumineuse | LED (12 LED) |
| Source d'énergie | Alimentation solaire |
| Batterie | Rechargeable 400mAh Ni-MH (included) |
| Temps de charge | 6-8 heures en plein soleil |
| Temps de travail | 8 à 10 heures (une fois la batterie complètement chargée) |
| Niveau de résistance à l'eau | Étanchéité IP65 |
| Matériel | Acrylonitrile butadiène styrène (ABS) |
| Product Dimensions (torch head) | 2.36"P x 2.36"L x 8.46"H |
| Hauteur totale assemblée | Environ 50 cm |
| Caractéristiques spéciales | Realistic flame effect, automatic on/off |
Instructions d'installation
Follow these steps to assemble and prepare your solar torch lights for use:
- Unscrew the Torch Top: Gently twist and remove the top section of the torch head to access the internal switch.
- Activer le commutateur : Locate the ON/OFF switch inside the torch head and slide it to the "ON" position. The torch will not charge if the switch is off.
- Assembler le poteau : Connect the extension pipe to the bottom of the torch head.
- Fixez le piquet de terre : Securely attach the ground stake to the bottom of the extension pipe.
- Install in Desired Location: Choisissez un emplacement avec ample direct sunlight throughout the day. Push the assembled torch light firmly into the ground.
Image: Visual guide for assembling the solar torch light. Ensure the internal switch is set to ON before placing the light in the sun.
Image: Illustration of solar charging during the day and automatic illumination at night. The lights require 6-8 hours of direct sunlight for 8-10 hours of operation.
Mode d'emploi
Once properly installed and the switch is in the "ON" position, your LQWELL Solar Torch Lights will operate automatically:
- Opération automatique: The built-in light sensor will detect ambient light levels. The torch lights will automatically turn on at dusk and turn off at dawn.
- Charge solaire: During daylight hours, the solar panel on top of the torch head will convert sunlight into electricity to charge the internal Ni-MH battery. Ensure the solar panel is clean and unobstructed for optimal charging.
- Effet Flamme : The 12 LEDs create a realistic flickering flame effect, providing a warm and inviting ambiance.
Image: Solar torch lights in an outdoor setting, highlighting key features like solar power, IP65 waterproofing, automatic operation, and 12 LED flame effect.
Entretien
Pour garantir la longévité et les performances optimales de vos lampes torches solaires, tenez compte des conseils d'entretien suivants :
- Panneau solaire propre : Essuyez régulièrement le panneau solaire avec un chiffon doux et sec.amp chiffon pour enlever la poussière, la saleté ou les débris qui pourraient nuire à l'efficacité de la charge.
- Effacer les obstacles : Ensure no trees, bushes, or structures block direct sunlight from reaching the solar panel throughout the day.
- Résistance aux intempéries : The lights are IP65 waterproof and designed to withstand rain, snow, frost, and high temperatures. However, extreme weather conditions may temporarily affect performance.
- Remplacement de la batterie : The Ni-MH battery is rechargeable. If the light duration significantly decreases over time, the battery may need replacement. Use a compatible rechargeable Ni-MH battery.
Image: The solar torch light demonstrating its all-weather readiness, including waterproof, sunproof, windproof, and snowproof capabilities.
Dépannage
- La lumière ne s'allume pas la nuit :
- Assurez-vous que l'interrupteur MARCHE/ARRÊT est en position « MARCHE ».
- Vérifiez que le panneau solaire reçoit 6 à 8 heures d'ensoleillement direct par jour. Déplacez la lampe si nécessaire.
- Check if the solar panel is dirty or obstructed. Clean it if needed.
- The battery may be depleted. Allow several days of full sun charging. If the issue persists, consider replacing the battery.
- La durée d'éclairage est courte :
- Assurez-vous que le panneau solaire est propre et exempt d'obstructions.
- Confirm the light is placed in an area receiving maximum direct sunlight.
- Battery performance may degrade over time. Consider replacing the rechargeable Ni-MH battery.
Garantie et assistance
For warranty information or technical support regarding your LQWELL Solar Torch Lights, please refer to the product packaging or contact LQWELL customer service directly through their official website ou le détaillant où le produit a été acheté.
Fabricant: LQWELL