Manuel d'utilisation de l'alimentation isolée pour pédale de guitare LEKATO MPP-10

1. Introduction

Thank you for choosing the LEKATO MPP-10 True Isolated Guitar Pedal Power Supply. This device is designed to provide stable, clean, and quiet power to your effect pedals, ensuring optimal performance without unwanted noise. With multiple isolated outputs and adjustable voltage options, the MPP-10 is a versatile solution for various pedalboard setups.

2. Contenu du colis

Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :

• 1x LEKATO MPP-10 True Isolated Power Supply Unit
• 1x Power Adapter (100-240V AC input, 12V DC output)
• 10x DC Power Cables (standard barrel connectors)
• 1x 9V Battery Clip Converter Cable
• 1x Polarity Conversion Cable
• 1x 3.5mm Conversion Cable
• 1x Manuel d'utilisation (ce document)

Figure 1: Contents of the LEKATO MPP-10 package.

3. caractéristiques du produit

3.1 True Isolated Power Supply

The MPP-10 features true isolated outputs, meaning each output channel is electrically separated. This design prevents unwanted noise and hum from affecting your pedals, providing a clean and stable power source for optimal audio performance.

Figure 2: The MPP-10 unit highlighting its 10 isolated outputs and USB port.

3.2 Short Circuit and Over-Current Protection

Each of the 10 output channels is equipped with independent short-circuit and over-current protection. In the event of a short circuit on one output, only that specific output will be affected, and its LED indicator will turn off, while other channels continue to operate normally.

Figure 3: Visual representation of the short circuit protection feature, showing an LED turning off when a fault occurs.

3.3 Adjustable Voltage Sorties

Two dedicated output ports (9 and 10) offer adjustable voltage settings of 9V, 12V, or 18V, each providing up to 500mA. This allows compatibility with a wider range of effect pedals that require different voltage entrées.

Figure 4 : Détaillé view of the MPP-10's output specifications, highlighting the adjustable voltage ports.

3.4 ports de chargement USB

In addition to powering your pedals, the MPP-10 includes a 5V 1A USB output port, allowing you to conveniently charge mobile devices or power other USB-compatible accessories directly from your pedalboard.

Figure 5: The MPP-10's USB port in use, charging a mobile phone.

3.5 Durable Aluminum Alloy Housing

The unit is constructed with a heavy-duty aluminum alloy casing, providing excellent heat radiation and robust protection for the internal components, ensuring reliability and longevity.

Figure 6: The compact and durable aluminum alloy housing of the MPP-10.

4. Instructions de configuration

1. Connectez l'adaptateur secteur : Plug the included 12V DC power adapter into the "POWER IN" port (red connector) on the LEKATO MPP-10 unit. Then, plug the power adapter into a standard AC wall outlet. The red "POWER" LED on the unit will illuminate.
2. Raccordez les câbles d'alimentation CC : Use the provided DC power cables to connect your effect pedals to the output ports on the MPP-10. Ensure the correct polarity (center negative is standard for most guitar pedals). If a pedal requires center positive, use the included polarity conversion cable.
3. Sélectionner le volume de sortietage (for adjustable ports): For outputs 9 and 10, use the small toggle switch next to each port to select the required voltage (9V, 12V, or 18V) for your specific pedal. Verify the pedal's voltage exigences avant de vous connecter.
4. Vérifiez les connexions : Once all pedals are connected, the green LED indicator above each active output port will light up, confirming power delivery.

Figure 7: Important note on ensuring correct positive and negative polarity before wiring your pedals.

Figure 8 : Example of the MPP-10 integrated into a guitar pedalboard.

5. Mode d'emploi

5.1 Mise sous/hors tension

The MPP-10 unit powers on automatically when connected to the main power adapter. There is no separate on/off switch on the unit itself. Disconnect the main power adapter to power off the unit.

5.2 Indicateurs LED

Each output port has a corresponding green LED indicator. When a pedal is correctly connected and receiving power, its LED will illuminate. If an LED is off, it may indicate a short circuit on that channel or an unconnected pedal.

5.3 Using Adjustable Voltage Sorties

For outputs 9 and 10, ensure the toggle switch is set to the correct voltage (9V, 12V, or 18V) required by your pedal. Incorrect voltage can damage your pedal. Always consult your pedal's manual for its power requirements.

5.4 Sortie USB

The USB OUT port provides 5V 1A power. Connect your USB-powered device using a compatible USB cable. This port is ideal for charging smartphones, tablets, or powering small USB accessories.

6. Spécifications de sortie

7. Sécurité et dépannage

7.1 Informations de sécurité importantes

• Vérifiez toujours le voltage and current requirements of your pedals before connecting them to the power supply. Incorrect voltagcela peut causer des dommages permanents.
• Ensure correct polarity. Most guitar pedals use center-negative polarity. Use the provided polarity conversion cable if your pedal requires center-positive.
• N’exposez pas l’appareil à l’eau, à l’humidité ou à des températures extrêmes.
• Do not attempt to open or modify the unit. This will void the warranty and may cause electric shock.

Dépannage 7.2

• No Power to Pedal:
  • Check if the main power adapter is securely plugged into the wall and the MPP-10.
  • Ensure the DC power cable is firmly connected to both the MPP-10 output and the pedal.
  • If using an adjustable output (9 or 10), confirm the correct voltage est sélectionné.
  • If the LED for a specific output is off, a short circuit may have occurred. Disconnect the pedal and cable from that output and check for faults.
• Bruit/bourdonnement indésirable :
  • The MPP-10 features true isolated outputs to minimize noise. If hum persists, check your guitar cables, instrument, and amplifier for other potential noise sources.
  • Assurez-vous que toutes les connexions sont bien fixées et exemptes de dommages.

8. Spécifications

9. Entretien

• Gardez l'appareil propre en l'essuyant avec un chiffon doux et sec.
• Évitez d'utiliser des nettoyants abrasifs ou des solvants.
• Conservez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• Assurez une ventilation adéquate autour de l’appareil pour éviter toute surchauffe.

10. Vidéos officielles du produit

11. Garantie et assistance

For warranty information, technical support, or any inquiries regarding your LEKATO MPP-10 True Isolated Guitar Pedal Power Supply, please refer to the official LEKATO webConsultez le site ou contactez votre revendeur agréé. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.