Manuel d'utilisation du robot aspirateur et laveur de sols Vactidy T8

1. Introduction

The Vactidy T8 Robot Vacuum and Mop Combo is designed to provide efficient and convenient floor cleaning for your home. This 2-in-1 device offers both vacuuming and mopping capabilities, adapting to various floor types including hard floors and low-pile carpets. Equipped with intelligent navigation and multiple control options, the T8 aims to simplify your daily cleaning routine.

Caractéristiques principales :

• Aspirateur et serpillère 2 en 1 : Simultaneous cleaning with a combined dustbin and water tank.
• Aspiration puissante : 3000Pa suction power with three adjustable gears (Max/Standard/Quiet) and automatic carpet boost.
• Contrôle intelligent: Operate via Vactidy App, Siri, Google Home, Alexa voice commands, or the included handheld remote.
• Diverse Cleaning Modes: Auto Clean, Spot Clean, Edge Clean, and Mop Mode for comprehensive coverage.
• Navigation gyroscopique : Accurately maps and plans cleaning routes for efficient coverage.
• Slim Design & Self-Charging: Faible profile (2.87 inches) for cleaning under furniture, and automatically returns to the charging base.

Figure 1: Vactidy T8 Robot Vacuum and Mop Combo with accessories.

2. Contenu du colis

Vérifiez que tous les articles sont présents et en bon état à l'ouverture du colis.

Figure 2 : Représentation visuelle du contenu de l'emballage.

• Robot Vacuum and Mop (x1)
• 2-in-1 Dustbin & Water Tank (x1)
• Mopping Cloth (x2)
• Filtres HEPA (x2)
• Outil de nettoyage (x1)
• Brosses latérales (x4)
• Télécommande (x1)
• Adaptateur (x1)
• Socle de recharge (x1)
• Manuel d'utilisation (x1)

3. Guide de configuration

3.1 Initial Preparation and Charging

1. Retirez le film protecteur : Before first use, remove all protective films from the robot vacuum.
2. Installation de la station de recharge : Place the charging base against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the sides and 2 meters (6 feet) in front.
3. Connecter l'alimentation : Plug the adapter into the charging base and then into a wall outlet. The indicator light on the charging base will illuminate.
4. Chargez le robot : Place the Vactidy T8 onto the charging base, aligning the charging contacts. Ensure the robot is properly docked and the indicator light on the robot begins to flash, indicating it is charging. Allow the robot to fully charge before its first use (approximately 4-5 hours).

Figure 3: Vactidy T8 Robot Vacuum docked on its charging base.

3.2 Configuration de l'application et de la commande vocale

The Vactidy T8 can be controlled via the Vactidy App, Alexa, or Siri. Ensure your home Wi-Fi network is 2.4GHz, as 5GHz is not supported.

1. Download Vactidy App: Rechercher "Vactidy" in your mobile app store (App Store for iOS or Google Play Store for Android) and download the application.
2. S'inscrire/Se connecter : Ouvrez l'application et suivez les instructions pour créer un nouveau compte ou vous connecter si vous en avez déjà un.
3. Ajouter un appareil : In the app, select "Add Device" or the "+" icon to begin the pairing process.
4. Se connecter au Wi-Fi : Follow the in-app instructions to connect your T8 to your home's 2.4GHz Wi-Fi network. This typically involves pressing and holding the Power and Home buttons on the robot simultaneously for 5 seconds until the button light blinks and a voice prompt confirms connection mode.
5. Appariement complet : Wait for the app to complete the pairing process. Once successful, you can name your robot and access its full features.

3.3 Siri Voice Control Setup

After successfully connecting your Vactidy T8 to the app, you can set up Siri voice commands for convenient control.

1. Access Siri Settings: In the Vactidy App, navigate to the "Profile" page and tap on the "Siri" button.
2. Add Shortcut: Click on the "+" icon in the top right corner and select your connected T8 Robot Vacuum.
3. Select Command: Choose the desired function command (e.g., "Auto Clean," "Spot Clean," "Recharge").
4. Record Instruction: Record your custom voice instruction for the selected command (e.g., "Hey Siri, Auto clean"). You can also type the instruction directly.
5. Sauvegarder: Save the shortcut. Now you can use your custom voice command to control your robot vacuum.

4. Modes de fonctionnement

The Vactidy T8 offers several cleaning modes to suit different needs and environments.

4.1 Mode de nettoyage automatique

In Auto Clean mode, the robot intelligently navigates your home, creating a real-time map to plan the most efficient cleaning route. It covers all accessible areas without missing spots.

Figure 4: Robot vacuum performing an automatic cleaning pattern.

4.2 Spot Clean Mode

Use Spot Clean mode for concentrated cleaning of a specific area with heavy dirt or debris. The robot will clean in a spiral pattern around the designated spot.

Figure 5: Robot vacuum performing a spot cleaning pattern.

4.3 Edge Clean Mode

Edge Clean mode is ideal for cleaning along walls and furniture edges. The robot will follow the perimeter of the room to ensure thorough cleaning of corners and hard-to-reach areas.

Figure 6: Robot vacuum performing an edge cleaning pattern.

4.4 Mop Mode

Attach the mopping cloth and fill the water tank to activate Mop Mode. The robot will simultaneously vacuum and mop hard floors. Water flow levels can be adjusted via the app.

Figure 7: Robot vacuum in 2-in-1 vacuum and mop combo mode.

5. Entretien

Regular maintenance ensures optimal performance and extends the lifespan of your Vactidy T8.

5.1 Poubelle et réservoir d'eau

• Vidange: Press the release button to remove the 2-in-1 dustbin and water tank. Open the dustbin cover and empty debris into a trash can.
• Nettoyage: Rinse the dustbin and water tank with water. Ensure they are completely dry before reinserting them into the robot.

Figure 8: Process of emptying the combined dustbin and water tank.

5.2 Brosse à rouleau et brosses latérales

• Brosse rouleau : Remove the roller brush cover and lift out the brush. Use the included cleaning tool to remove hair and debris tangled around the brush.
• Brosses latérales : Periodically check the side brushes for wear or damage. If necessary, remove them by unscrewing and replace with new ones.

Figure 9: Underside of the robot showing the roller brush and side brushes.

5.3 Filtres

• Nettoyage: Tap the HEPA filter to remove dust. Do not wash the HEPA filter with water. The sponge filter can be rinsed with water.
• Remplacement: Remplacez les filtres tous les 3 à 6 mois, ou plus fréquemment en fonction de l'utilisation.

6. Dépannage

If you encounter issues with your Vactidy T8, refer to the following common problems and solutions:

7. Spécifications

8. Garantie et assistance

For warranty information, technical support, or any inquiries regarding your Vactidy T8 Robot Vacuum and Mop Combo, please refer to the official Vactidy webconsultez le site ou contactez directement leur service client.

You can also find additional resources and a downloadable user manual PDF at the following link:

Télécharger le manuel d'utilisation (PDF)