Manuel d'utilisation de la lampe LED Nora NMP2-LED30B Josh

1. Introduction

The Nora NMP2-LED30B Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for installation in limited spaces, providing excellent and even illumination without producing a diode image. This fixture can be either recessed or surface mounted and is dimmable with a compatible dimmable power supply. It features LED technology that eliminates forward heat, UV, and infrared rays, making it safe for heat-sensitive items.

Caractéristiques principales :

• Compact design: 0.57 inches deep with a 2.72-inch diameter.
• Flexible installation: Recessed or Surface Mount options.
• Dimmable with appropriate power supply.
• Instant illumination: No flicker, delay, or warm-up time.
• No diode image, UV, or infrared wavelengths.
• cULus Listed for safety.

2. Consignes de sécurité

Veuillez lire attentivement toutes les instructions avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.

• Sécurité électrique : Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved. Disconnect power at the fuse or circuit breaker before installation or servicing.
• Voltage: This product operates on 24V DC. Ensure you use a compatible 24V DC power supply (sold separately). Connecting to an incorrect voltage will damage the unit and void the warranty.
• Environnement: For indoor use only. Do not expose to water or excessive moisture.
• Chaleur: Do not cover the fixture with materials that may restrict airflow, as this can lead to overheating.
• Modifications: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• 1 x Josh LED Puck Light
• 1 x 72-inch wire with connector

Note: A 24V DC power supply and dimmer (if dimming functionality is desired) are required and sold separately.

4. Configuration et installation

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture. Choose the method that best suits your application.

4.1. Installation terminéeview

Figure 1 : Face avant view of the Nora Josh LED Puck Light, showcasing its black finish and diffused light surface.

Figure 2 : Vue de dessus view of the Nora Josh LED Puck Light, highlighting its circular design and even light distribution.

4.2. Dimensions et options de montage

Figure 3: Detailed dimensional drawing illustrating the specifications for both recessed and surface mounting options. The recessed mount requires a 2.5-inch cutout (without mounting bracket) or 2.74-inch (with mounting bracket) and has a depth of 0.06 inches. The surface mount has a depth of 0.57 inches and a diameter of 2.72 inches.

4.3. Installation du montage encastré

1. Préparez la surface : Ensure the mounting surface is clean and free of obstructions.
2. Coupé: Based on Figure 3, create a circular cutout in the desired location. For recessed mounting, the cutout diameter is approximately 2.5 inches (without mounting bracket) or 2.74 inches (with mounting bracket).
3. Câblage : Route the 72-inch wire from the puck light through the cutout. Connect the wire to a compatible 24V DC power supply (not included). Ensure polarity is correct.
4. Insérer le luminaire : Gently push the puck light into the cutout until it sits flush with the surface. The spring clips (if present) will secure it.

4.4. Installation en surface

1. Préparez la surface : Ensure the mounting surface is clean and free of obstructions.
2. Marquer les points de montage : Use the puck light as a template to mark the screw locations for the mounting bracket (if included) or directly for the fixture.
3. Secure Mounting Bracket (if applicable): Attach the mounting bracket to the surface using appropriate screws (not included).
4. Câblage : Route the 72-inch wire from the puck light to the location of the 24V DC power supply (not included). Connect the wire, ensuring correct polarity.
5. Fixer le luminaire : Secure the puck light to the mounting bracket or directly to the surface using screws.

5. Mode d'emploi

Once installed and connected to a compatible 24V DC power supply, the Nora Josh LED Puck Light is ready for operation.

• Marche/Arrêt : The light will turn on when power is supplied from the 24V DC power source. Use the switch on your power supply or a connected wall switch to control power.
• Atténuation: If connected to a dimmable 24V DC power supply and a compatible dimmer switch (e.g., remote control or app-controlled dimmer), you can adjust the brightness of the puck light. Follow the instructions provided with your specific dimmer and power supply for operation.

6. Entretien

The Nora Josh LED Puck Light requires minimal maintenance.

• Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez-le avec un chiffon doux, sec ou légèrement humidifié.amp Chiffon. N’utilisez pas de nettoyants abrasifs, de solvants ou de produits chimiques agressifs, car ils pourraient endommager la finition ou les composants électriques.
• Remplacement de l'ampoule : The LED light source is integrated and not user-replaceable. The average lifespan of the LEDs is 50,000 hours.

7. Dépannage

If you encounter issues with your Nora Josh LED Puck Light, refer to the following common problems and solutions:

8. Spécifications

9. Garantie et assistance

Pour toute information relative à la garantie ou pour obtenir une assistance technique, veuillez contacter le fabricant ou votre point de vente. Conservez votre reçu d'achat comme preuve d'achat.